Novacro Machining Inc.

Assets No Longer Required Due to Restructuring – Major Event!

 

Date

Wednesday, May 15, 2024

Start Time

10:30 AM EDT

Inspection

Tuesday, May 14 from 9 AM to 4 PM or by appointment. Please email info@corpassets.com to arrange.

Removal

All assets must be removed no later than Friday, June 7 by appointment only. Rigging details to follow.

Location

380 Dewitt Road, Stoney Creek, Ontario, Canada, L8E 2T2

Industry

Machining
 


Add to Calendar
 

FEATURING: TOSHIBA BTD110 R16 CNC table-type horizontal boring mill; (2) KURAKI KBT-11WDX CNC table-type horizontal boring mills; TOSHIBA BMC 800 CNC twin pallet horizontal machining center; KIA KH50G CNC twin pallet horizontal machining center; MECO (2012) MEC-150/100/1400SP CNC key seater; BULLARD 66” DYN-AU-TAPE CNC vertical turret lathe; GIDDINGS & LEWIS 52” CNC vertical turret lathe; BULLARD 46” DYN-AU-TAPE CNC vertical turret lathe; BULLARD 36” DYN-AU-TAPE CNC vertical turret lathe; HWACHEON ECO 25P3 CNC twin spindle chucker; MONARCH PATHFINDER CNC engine lathe; HEXAGON METROLOGY (2006) ALPHA IMAGE 203315 free standing CNC gantry-type CMM; FELLOWS 36 TYPE vertical gear shaper; FELLOWS 36 vertical gear shaper; NANJING YN3180 horizontal gear hobber; FIRST Y3150 horizontal gear hobber; STANKO 74430 key seater; RAMBAUDI V2 vertical milling machine; BAXTER VERTICUT H360-HFA automatic horizontal bandsaw; CURTIS R/S 50 50 HP rotary screw air compressor; FRIULAIR (2022) ACT200UP_MB refrigerated air dryer; INTERNATIONAL (2014) 7600 tandem axle flat deck crane truck; FORD (2020) TRANSIT CONNECT van *LOW MILEAGE*; TOYOTA (2018) GC35U lpg forklift *LOW HOURS*; TOYOTA 5FGC25 lpg forklift; KOMATSU FG18STLP-16 lpg forklift; (6) HYSTER (2018) electric forklifts; (6) TOYOTA (2017) stand on electric forklifts; (3) SKYJACK III (2013) 3219 electric scissor lifts *LOW HOURS*; Selection of welders from MILLER and HOBART; ALSO: Machine tool accessories including rotary tables, angle plates, machine vises & perishable tooling; LARGE SELECTION of LISTA cabinets and work benches, hand tools & granite surface plates; Aelection of surplus material including angle iron, flat stock, round stock; Adjustable pallet racking, CAT 50 & CAT 40 tool holders and MUCH MORE!

Rigging and Removal Details

THE EXCLUSIVE MACHINERY AND EQUIPMENT RIGGER FOR THIS SALE IS:
Redmond & Associates – Tony Redmond
T: (905) 671-8800 | tony@redmondmovers.com


*All assets must be removed no later than Friday, June 7 BY APPOINTMENT ONLY. Please contact  Redmond & Associates – Tony Redmond at tony@redmondmovers.com OR (905) 671-8800 to arrange after invoice has been paid in full.


*Further information on removal details can be found in the Terms & Conditions tab or in the Lot Catalogue.



TRUCKING AND TRANSPORT SERVICES:

Trucking and transport services, including cross-border logistics, are available through Fuze Logistics Inc. Please contact Chris Tan for a firm quote or any questions regarding transportation.

Fuze Logistics Services Inc.
Chris Tan
941-702-3310
machinerylogistics@fuzelogistics.com

   

 

CNC VERTICAL TURRET LATHES

  • BULLARD 66” DYN-AU-TAPE CNC vertical turret lathe with FANUC CNC control, 80” swing, 52”max. turning height, 12-station ATC, 66” diameter 3-jaw hydraulic chuck, coolant, chip conveyor, auxiliary horizontal head, s/n: 32411
  • GIDDINGS & LEWIS 52” CNC vertical turret lathe with MITSUBISHI CNC control, 64” swing,  42” max. turning height 5-station turret, 52” diameter 3-jaw hydraulic chuck, coolant, chip conveyor, auxiliary horizontal head, s/n: 500-30-63
  • BULLARD 46” DYN-AU-TAPE CNC vertical turret lathe with FANUC SERIES O-T CNC control, 60” swing, 45” max. turning height, 5-station turret, 46” diameter 4-jaw hydraulic chuck, coolant, chip conveyor, s/n: 330-74
  • BULLARD 36” DYN-AU-TAPE CNC vertical turret lathe with FANUC SERIES 0-T CNC control, 48” swing, 30” max. turning height, 5-station turret, 36” diameter 4-jaw hydraulic chuck, coolant, chip conveyor, s/n: 32130

CNC HORIZONTAL BORING MILLS

  • TOSHIBA BTD110 R16 CNC table-type horizontal boring mill with TOSNUC 888 CNC control, 4.3” spindle, 63”x55” rotary table, Travels: X-78.7” Y- 59.1” Z- 57.1” W- 19.7”, B – 360 degrees in 0.0001 degree indexing, BT50 spindle taper, speeds to 3000 RPM, 40 HP spindle motor, 38-station ATC, coolant, chip conveyor, s/n: 144687
  • (2) KURAKI KBT-11WDX CNC table-type horizontal boring mills with FANUC CNC control, 4.33” spindle, 62.99” x 55” rotary table, Travels: X- 78.74” Y- 59.06” Z- 57.09” W- 25.59”, B- 360 deg. in 90 deg. increments, BT50 spindle taper, speeds to 1300 RPM, 20 HP spindle motor, 40-station ATC, coolant, chip conveyor, s/n: 43526, 43559

CNC TWIN PALLET HORIZONTAL MACHINING CENTERS

  • TOSHIBA BMC 800 CNC twin pallet horizontal machining center with TOSNUC 8 CNC control, (2) 31.5” x 31.5” pallets, Travels: X- 49.2” Y- 39.4” Z- 35.4”, speeds to 5000 RPM, BT50 spindle taper, 68 station ATC, 40 HP, coolant, chip conveyor s/n: 212658
  • KIA KH50G CNC twin pallet horizontal machining center with FANUC SERIES 15-M CNC control, (2) 20”x20” pallets, Travels: X- 30” Y- 28” Z- 25.6”, 31” maximum distance spindle nose to table top, speeds to 4500 RPM, BT50 spindle taper, 40 station ATC, 25HP, coolant, chip conveyor, s/n: KH50026

CNC KEY SEATER

  • MECO MEC-150/100/1400SP CNC key seater with MECO CNC touch screen control, 47.24” stroke, 59.05” max. diameter table, approx. 55” dia. X 43”H max. workpiece size, approx. 5,500 lb. max. workpiece weight, coolant, s/n: 290

CNC TWIN SPINDLE LATHE

  • HWACHEON ECO 25P3 CNC twin spindle lathe with FANUC SERIES 0-T CNC control, (2) 10” 3-jaw hydraulic chucks, Travels: X- 8.27” Y- 9.06”, 12.2” max. turning diameter, 8.27” max. turning length, speeds to 2000 RPM, 8-station turret, coolant, chip conveyor, s/n: M07634411L

CNC ENGINE LATHE

  • MONARCH PATHFINDER CNC engine lathe with GENERAL NUMERIC GN3 CNC control, 32” swing over bed, 135” between centers, 3” spindle bore, speeds to 1250 RPM, 22” 4-jaw chuck, steady rest, coolant, s/n:5218

CNC GANTRY-TYPE CMM

  • HEXAGON METROLOGY (2006) ALPHA IMAGE 203315 free standing CNC gantry-type CMM with 60”x60” rolling steel set up table, approx. measuring envelope: X – 71”; Y – 102”; Z – 38”, RENISHAW PH10MQ touch probe with RENISHAW PHC10-2 control, joystick operator control, PC, printer, s/n: ALPH000140
  • RENISHAW PH10T touch probe (RBE 2023 - $26,900 CAD REPLACEMENT COST)

VERTICAL GEAR SHAPING MACHINES

  • FELLOWS 36 TYPE vertical gear shaper with 47” diameter table, approx. 16” max. distance spindle nose to table top, coolant, MITUTOYO 2-axis DRO, s/n: 33227
  • FELLOWS 36 vertical gear shaper with 35” diameter table, approx. 20” max. distance spindle nose to table top, coolant, MITUTOYO 2-axis DRO, s/n: 34050

HORIZONTAL GEAR HOBBING MACHINES

  • NANJING YN3180 horizontal gear hobber with 31” max. workpiece diameter, 0.39” max. hobbing modulus, s/n: 2538
  • FIRST Y3150 horizontal gear hobber with 19” max. workpiece diameter, 0.23” max. hobbing modulus, s/n: 767

CONVENTIONAL KEY SEATER

  • STANKO 74430 key seater with 24” diameter table, approx. 28” stroke, speeds to 570 RPM, MITUTOYO 2-axis DRO, S/N: 536

MACHINE TOOL ACCESSORIES

  • EIMELDGEN 59” diameter auxiliary turn table with speeds to 2000 RPM, s/n: n/a
  • MFG. UNKNOWN  30”x30” hydraulic auxiliary turn table, s/n: n/a
  • 64”x65” drilled & tapped angle plate
  • 34”x34”x60” drilled & tapped tombstone

CONVENTIONAL MACHINE TOOLS

  • RAMBAUDI V2 vertical milling machine with 12”x42” table, speeds to 5100 RPM, MITUTOYO 2-axis DRO, s/n: 45515
  • BAXTER VERTICUT H360-HFA automatic horizontal bandsaw with 14”x 19” capacity, 5 HP, hydraulic shuttle vise, hydraulic clamping, coolant, s/n: 5184
  • MILLER (2009) SYNCROWAVE 200 digital TIG welder with cables & gun, s/n: LK150226L
  • HOBART EXCEL-ARC 6045 CC/CV MIG welder with HOBART DUAL twin reel wire feeder, cables & gun, s/n: 396WS13624
  • GULLCO MODEL 125 electrode stabilizing oven with 550 deg. F max. temperature, s/n: n/a
  • OLIVER 510 drill pointer with 9” grinding wheel, s/n: F4091V
  • DAREX SP2500 bench-type precision drill sharpener, s/n: n/a
  • STAMFORD 12” double end pedestal grinder with speeds to 1750 RPM, s/n: 3199/1
  • FORD-SMITH MODEL 40 10” double end pedestal grinder with speeds to 1725 RPM, s/n: 66412
  • CANTOOL 75 4” horizontal belt sander with speeds to 3200 RPM, 4 HP, s/n: 176
  • MFG. UNKNOWN hydraulic H-frame shop press with 29.5” distance between uprights, s/n: n/a

COMPRESSORS & DRYERS

  • CURTIS R/S 50 50 HP rotary screw air compressor with 212 CFM, 125 PSI, s/n: 7085G01016
  • BARTON AIR conventional compressor unit with (2) 25 HP compressors, s/n: n/a
  • FRIULAIR (2022) ACT200UP_MB refrigerated air dryer, s/n: 220022903

ROLLING STOCK

  • INTERNATIONAL (2014) 7600 tandem axle flat deck crane truck with NAVISTAR 390 HP diesel engine, EATON FULLER 10-speed manual transmission, air brakes, FABER HL-L 125-35 9,600 lb. capacity picker crane, 24’ steel deck, 48,7310 km & 10,637 total engine hours (recorded on meter at time of listing), VIN: 1HTGS5NT0FHS16380
  • FORD (2020) TRANSIT CONNECT van with 2.0 liter 4 cylinder gas engine, automatic transmission, FWD, keyless entry, power win/lock/mirr, Bluetooth, 87,000KM (recorded on meter at time of listing) VIN: NM0LS7W20L1474258
  • TOYOTA (2018) GC35U lpg forklift with 6400LBS max capacity, 187” 3-stage high visibility mast, side shift, cushion tires (recorded on meter at time of listing) 1012hrs S/N: 13055
  • TOYOTA 5FGC25 lpg forklift with 4700LBS max capacity, 188” 2-stage high visibility mast, cushion tires, 11,396hrs (recorded on meter at time of listing) S/N: 5GCU25-83328
  • KOMATSU FG18STLP-16 lpg forklift with 3200lbs max capacity, 188” 3-stage high visibility mast, side shift, cushion tires S/N: 603185A
  • (2) HYSTER (2018) electric forklift with 5,000lbs capacity, 48V battery, 4-stage mast, side shift, 4 functions & fittings for positioner, non-marking tires, 10598hrs/10536hrs (recorded on meter at time of listing) S/N: 24001S / 2399S
  • (4) HYSTER (2018) electric forklift with 5,000lbs capacity, 48V battery, 4-stage mast, side shift, hours ranging from 7568hrs – 10,365hrs (recorded on meter at time of listing) S/N: 164S / 24000S / 950S / N/A
  • (6) TOYOTA (2017) stand on electric forklift with, 4,000lbs capacity, 36V battery,4-stage Mast, side shift, non-marking tires, hours ranging from 12,573hrs – 17,620 (recorded on meter at time of listing) S/N: 56416 / 56425 / 56434 / 56430 / 56419 / 56458
  • JUNGHEINRICH (2008) EKS 314 3,000 lb. capacity high level 48V electric ride-on order picker with 240" 3-stage mast, 3,890 hrs (recorded on meter at time of listing), s/n: FN387463
  • (3) SKYJACK III (2013) 3219 electric scissor lifts with hours ranging from 143hrs – 173hrs (recorded on meter at time of listing) S/N:  22054083 / 22056028 / 22054261

ALSO:

  • Machine tool accessories including rotary tables, angle plates, machine vises; perishable tooling; LARGE SELECTION of LISTA cabinets and work benches; hand tools; granite surface plates; selection of surplus material including angle iron, flat stock, round stock; adjustable pallet racking; CAT 50 & CAT 40 tool holders and MUCH MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.
DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS
MODALITÉS ET CONDITIONS DE VENTE

Payment

A Buyer's Premium of 19% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.
Download Full Payment Information
Download Buyer Deposit Form
CAD Wire Transfer Details
USD Wire Transfer Details
GBP Wire Transfer Details
EUR Wire Transfer Details

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.
 
Please read our Full Terms & Conditions for Removal Requirements

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

Rigger Release Authorization Form

 

Sample of 'Certificate of Insurance' or 'CI'

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com		 Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com