Vale – Sudbury #10

Underground Mining Assets & MRO Spares

 

Date

Tuesday, June 18, 2024

Start Time

10:30 AM EDT

Inspection

Friday, June 14 from 10 AM to 11 AM. Full PPE required. Please email kellybaird.pestell@vale.com for details.

Removal

All assets must be removed no later than Friday, July 5 by appointment only.

Industry

Mining Equipment
 

FEATURING: (2) BTI TRANSMIXER underground cement trucks; (8) CANUN underground drills; ATLAS COPCO underground jumbo drill; ATLAS COPCO ST14, underground scooptram; CASE 845D motor grader; BOBCAT skidsteer; WACKER NEUSON portable light tower; (4) Outdoor Forklifts; (5+) Snowmobiles, ATVs & Boats etc.; (2) ARGO 8x8 TITANS; ASSORTMENT OF: MRO SPARES, dedicated machine accessories, vehicles, electrical infrastructure assets & MORE!

* IMPORTANT INFORMATION REGARDING INSPECTION AND REMOVAL *

**FOR REMOVAL, MANDATORY CLASS 3 HIGH VISIBILITY SAFETY APPAREL (HVSA) WILL BE ENFORCED. APPAREL INCLUDES: Steel Toe Footwear, Hard Hats with Retro-Reflective Tape, Safety Glasses, as well as 360° HVSA Coveralls.

*Vale will hold one inspection on Friday, June 14 from 10 AM to 11 AM.

If you plan to inspect the assets, an appointment must be made. There will be no exceptions. To reserve a spot , please contact kellybaird.pestell@vale.com.

For removal, Vale will provide a forklift with an operator to load all items on pallets. They will not be responsible for loading of any unpalletized lots. It will be the buyers’ responsibility to make all arrangements required for loading items which cannot be loaded with a forklift and require specialized equipment such as, cranes, boom trucks and load vehicles.

Third party technical support with Vale Site access and training can be hired at the buyers’ expense to assess equipment purchases with regards to loading and removals requirements.
 
Please note: Only transport that has been certified and pre-qualified with Vale may enter the site to remove items. The following companies have already been certified and can be contacted to arrange transportation for items purchased at the auction:
 
Manitoulin Transport: 705-692-4703
Johnny's Transportation: 705-855-8000
Consolidated Logistics (CLI): 705-682-4254

MINING EQUIPMENT

  • ATLAS COPCO (2006) ST14 underground scoop tram with 31,300 lb. capacity, 250KW diesel engine, 105" bucket, ATLAS COPCO touch-screen rig control system, fully-enclosed cab with climate control & am/fm radio, 2,620 hours (recorded on meter at time of listing), s/n: AVO06X037
  • ATLAS COPCO (2011) ST7 underground scoop tram with 20,000lbs capacity,  144KW diesel engine, 82” bucket,  ATLAS COPCO touch-screen rig control system, fully-enclosed cab with climate control s/n: AVO11X053
  • BTI ST-6M transmixer with diesel engine, 4 – post levelling actuators, fully enclosed cab s/n: 2008012
  • BTI ST-6M transmixer with diesel engine, 4 – post levelling actuators, R.O.Ps s/n: 2008043
  • MINEMASTER/CASE M84DHP underground motor grader, with CUMMINS diesel engine, 142” blade, 7810 hours (recorded on meter at time of listing) s/n: N/A
  • (6) CMAC-THYSSEN (2020) DHS drill platform s/n: 2020492; 2020493; 2020494; 2020491; 2019488; DHS455
  • (2) CMAC-THYSSEN (2019) DHS drill platform s/n: 2019489; DHS454
  • ATLAS COPCO BOOMER 281 jumbo drill rig with 1342hrs (recorded on meter @ time of listing) s/n: n/a

MOBILE EQUIPMENT

  • KUBOTA R520 mini loader with 4' bucket, 4107hrs (recorded on meter at time of listing) s/n: 10911
  • BOBCAT S100 skidsteer with diesel engine, hours n/a s/n: N/A
  • CATERPILLAR GC45K lpg forklift, 7153hrs (recorded on meter at time of listing) s/n: N/A
  • TCM FG30N9T lpg forklift with 6000lbs capacity, 130" max reach, sideshift, cushion tires, 15,776hrs (recorded on meter at time of listing) s/n: A26M70044
  • TCM FG30N9T lpg forklift with 5600lbs capacity, 118" max reach, sideshift, cushion tires, 13,523hrs (recorded on meter at time of listing) s/n: A26M700A5
  • CLARK GP530C lpg forklift with 3825lbs max capacity, 114" max reach, sideshift, cushion tires, 8167hrs (recorded on meter at time of listing) s/n: GP138MC003990702
  • TENANT 365 lpg ride one floor sweeper s/n: N/A

RECREATIONAL EQUIPMENT

  • ARCTIC CAT side by side with 500cc engine, hours N/A, awd VIN: N/A
  • ARGO (2008) AVENGER 8X8 with 750cc engine, 566hrs (recorded on meter at time of listing) VIN: 2DG5S0BT28NH27653
  • CENTAUR 950D 8X8 with diesel engine, track kit, hours n/a VIN: 2DG0000YX8NT12444
  • SKIDOO (2001) SCANDIC snowmobile with rotax 500 engine, 4412km (recorded at time of listing) VIN: YK352099X2R000230
  • SKIDOO (2000) SCANDIC snowmobile with rotax 440 engine, 3272km (recorded at time of listing) VIN: YK35181651R000380

PICKUP TRUCKS

  • CHEVROLET (2015) SILVERADO 1500 with 5.3l v8 engine, automatic transmission 4x4, crew cab, 5' 6" box, power win/lock/mir, mileage n/a VIN: 3GCULDEC1FG459162
  • CHEVROLET (2015) SILVERADO 1500 with 5.3l v8 engine, automatic transmission 4x4, crew cab, 5' 6" box, power win/lock/mir, mileage n/a VIN: 3GCUKPECXFG459175
  • CHEVROLET (2014) SILVERADO 1500 with 5.3l v8 engine, automatic transmission 4x4, crew cab, 5' 6" box, power win/lock/mir, mileage n/a vin: 3GCUKREC3EG4767

TRAILERS

  • LOADMAX t/a 18' flat deck trailer with ramps vin: N/A
  • EXCALIBUR 15' t/a trailer with ramps VIN:2N9FL162361076518
  • ADVANCE t/a 12' dump trailer VIN:N/A
  • WACKER LTC4 tow behind light tower with diesel engine s/n: N/A

ALSO:

  • Huge inventory of spares consisting of valves, electronics, bearings, belts and valves, machine tools such as drill presses, grinders and sanders, factory/warehouse supplies, scoop parts and accessories, and much more.

LIVE WEBCAST ONLY

Vale Sudbury 10 Brochure

Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 19% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN CAD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com