Boart Longyear Drilling Products Canada Ltd.

Complete Surface/Underground Drilling Shaft Manufacturing Facility

FEATURING: LINCOLN ELECTRIC AUTOMATION / TRU-AXIS CNC bar straightener; OKUMA LB4000EX CNC turning center; (3) MORI SEIKI NC3000/700 CNC turning centers; OKUMA LU25-858 CNC turning center; OKUMA CAPTAIN L470 CNC turning center; OKUMA LB25 CNC turning center; OKUMA LR15 CNC turning center; OKUMA CNC10 CNC turning center; (2) FANUC R200IA 6-axis robots; ABB 6-axis robot; (2) SURFACE pit daw furnaces; THOMPSON friction welder; EITEL-PRESS RP25 hydraulic bar straightener; TOCCO induction bar heater; BOMAR TRANSVERSE 610440GA CNC horizontal band saw; DO ALL C430A horizontal band saw; STRUERS EXOTOM enclosed chop saw; METLAB METCUT- A enclosed chop saw; DEVLEIG 3B-48 horizontal boring mill; (2) COLCHESTER MASTRIFF engine lathes; BRIDGEPORT 2S universal mill; BRIDGEPORT vertical mill; BROWN & SHARPE 612 surface grinder; TIPO IM35 gearhead drill; HOBART & ARCWELD welders; J&L METROLOGY EPIC200 optical comparator; KAESAR SIGMA DSD200 air compressor; KAESAR SIGMA SEC905 air compressor; KAESAR TG310E refrigerated air dryer; (2) DEMAG 7 TON capacity overhead bridge cranes; (5) SOS 2 TON capacity free standing overhead bridge cranes; (5) DEMAG / STAHL jib arm cranes;  (3) TOYOTA GCU LPG forklifts; HYSTER 535XL LPG forklift; NISSAN LPG forklift; SKYJACK SJIII 3219 scissor electric scissor lift & MORE!

AUTOMATIC BAR STRAIGHTENER

• LINCOLN ELECTRIC AUTOMATION/TRUAXIS (2021) AD2490 TRUAXIS STRAIGHTENING SYSTEM with ALLEN BRADLEY/LINCOLN ELECTRIC programmable PLC control, 4’ minimum bar length capacity, 21’ maximum bar length capacity, 1.53” minimum bar diameter, 2.36” maximum bar diameter, 30/360 degree scanning/measurement points, TRUAXIS pneumatic 40 US TON capacity straightening press, 3.25” chuck capacity, POWERPACK automatic bar loading/unloading system, integrated light curtains s/n: S040357

DUAL TURRET CNC TURNING CENTERS

• OKUMA (2011) LU35 850 dual turret CNC turning center with OKUMA OSP-P200L CNC control, ROTA TP350-115LH 14” hydraulic chuck, 21.65” max turning diameter, 36.22” max turning length, 3.54” spindle bore, upper turret travels X – 14.93”, Z – 36.28”, lower turret travels X – 9.85”, Z – 34.45”, speeds to 3200RPM, 40HP spindle motor, coolant, ENOMOTO chip conveyor, FILTERMIST mist collector s/n: 1528255
• OKUMA LR15 dual turret CNC turning center with OKUMA CNC control, 8” 3 jaw hydraulic chuck, 23.62” max turning diameter, 9.45” max turning length, 2.44” spindle bore, 10 station upper turret, 8 station lower turret, upper turret travels X – 7.68”, Z- 24.41”, lower turret travels X – 5.92”, Z – 24.41, speeds to 4200RPM, 20HP spindle motor, coolant, chip conveyor s/n: n/a

CNC TURNING CENTERS

• MORI SEIKI (2007) NC3000/700 CNC turning center with MORI SEIKI MSX-850111 CNC control, SMW AUTOBLOCK 18” hydraulic chuck, 16.54” max turning diameter, 28.07” max turning length, 4.13” through spindle bore, 10 station turret, travels X – 11.03”, Z – 23.28”, speeds to 3000RPM, 29.33HP spindle motor, coolant, chip conveyor, spindle chiller, FILTERMIST F1200 mist collector s/n: NL30161022
• MORI SEIKI (2006) NC3000/700 CNC turning center with MORI SEIKI MSX-850111 CNC control, SMW AUTOBLOCK 18” hydraulic chuck, 16.54” max turning diameter, 28.07” max turning length, 4.13” through spindle bore, 10 station turret, travels X – 11.03” , Z – 23.28”, speeds to 3000RPM, 29.33HP spindle motor, coolant, chip conveyor, spindle chiller, FILTERMIST F1200 mist collector s/n: NL301FL0729
• MORI SEIKI (2006) NC3000/700 CNC turning center with MORI SEIKI MSX-850111 CNC control, SMW AUTOBLOCK 18” hydraulic chuck, 16.54” max turning diameter, 28.07” max turning length, 4.13” through spindle bore, 10 station turret, travels X – 11.03”, Z – 23.28”, speeds to 3000RPM, 29.33HP spindle motor, coolant, chip conveyor, spindle chiller, FILTERMIST F1200 mist collector s/n: NL3015L075
• OKUMA CAPTAIN L470 CNC turning center with OKUMA CNC control, 10” hydraulic chuck, 16.54” max turning diameter, 12.99” max turning length, 4.37” spindle bore, 10-station turret, travels X – 11.81”, Z – 26.57, speeds to 3000RPM, 30HP spindle motor, coolant, HENNIG chip conveyor, FILTERMISS 5800 mist collector s/n: n/a
• OKUMA LB25 CNC turning center with OKUMA CNC control, SAMCHULLY 10” 3-jaw hydraulic chuck, 14.17” max turn diameter, 11.81” max turning length, 3.15” spindle bore, 12-station turret, travels X – 7.24”, Z – 26.38, speeds to 3500RPM, coolant, MLB chip conveyor, FILTERMIST FL1200 mist collector s/n: 9655
• OKUMA LNC 10 CNC turning center with OKUMA OSP700L CNC control, KITIGAWA B215 hydraulic chuck, 14.17” max turn diameter, 25.59” max turning length, 3.15” spindle bore, 12 station turret, travels X – 9.05”, Z – 25.59”, speeds to 3200RPM, coolant, chip conveyor s/n: 08060262

BAR FEEDERS

• GUDDEL 0909173 bar feeder with 14” 3 jaw chuck, 20’ overall length s/n: 
• CUSTOM MFG bar feeder 15” chuck, 20’ overall length, 13’ X 9” (4) chain infeed conveyor s/n: n/a
• CUSTOM MFG bar feeder with 16” 3–jaw chuck, 20’ overall length, 12’ X 7’ (5) chain infeed conveyor s/n: n/a

6-AXIS ROBOTS

• FANUC R2000/A165F 6 axis robot with FANUC R-J3IB controller and pendant s/n: R02X06270
• FANUC R-2000/A165F 6 axis robot with FANUC R-53IB controller and pendant s/n: R03506412
• ABB 6 axis robot with ABB 1RB76001400-25L control and pendant, s/n: n/a

BLAST FURNACES

• SURFACE pit draw furnace with SURFACE PLC cabinet, 800F max temperature, 1,200,000 BTU P/HR fuel demand, 21’ depth, 7’ diameter, (2) cooling stations s/n: J-525
• MFG UNKNOWN pit furnace with 21’ depth, 7’ diameter s/n: n/a

BAR STRAIGHTENERS

• EITEL PRESS RP25 hydraulic bar straightening press s/n: 13611
• (2) MFG UNKNOWN hydraulic bar straightening press s/n: n/a  

BAR FRICTION WELDERS

• THOMPSON friction welder with SIEMENS PLC control, 23’ overall bed length, 14” chuck, 14’ X 7’ (6) chain bar infeed conveyor s/n: RW93572
• TOCCO bar friction welder with TOCCO INDUCTRON II microprocessor control s/n: n/a

MACHINE TOOLS & CONVENTIONAL EQUIPMENT

• COLCHESTER MASTIFF 1400 gap bed engine lathe with 12” 3-jaw chuck, 22” swing, 26” swing in the gap, 83” in between centers, 3.5” spindle bore, speeds to 1400RPM,  ACCURITE 2 axis DRO s/n: n/a
• COLCHESTER MASTIFF 1400 gap bed engine lathe with 16” 4-jaw chuck, 22” swing, 26” swing in the gap, 83” in between centers, 3.5” spindle bore, speeds to 1400RPM s/n: n/a
• DEVLEIG 3B-48 horizontal boring machine with 40” X 26” t-slot table, speeds to 1200RPM, 50 taper, ACCURITE 2-axis DRO s/n: 12-1228
• BRIDGEPORT 2VS universal mill with 55” X 14” t-slot table, speeds to 1500RPM, power x/y traverse s/n: 4401847
• BRIDGEPORT vertical mill with 42” X 9” t-slot table, speeds to 2720RPM, 3/4HP, s/n: J125162
• CINCINNATI OM NO2 universal grinder with 39” X 5” table, 7” wheel, 3/4HP s/n: LT6412-4
• BROWN & SHARPE 612 surface grinder with 6” X 12” t-slot table, 6” wheel, s/n: 523-612-3239
• TIPO IM35 gearhead drill with 13” X 13” t-slot table, speeds to 2400RPM s/n: 29157
• ERLO TLAY gearhead drill with 17” X 13” t-slot table, speeds to 1270RPM s/n: n/a
• ENERPAC 100 TON capacity H frame shop press s/n: n/a
• HOBART MEGAFLEX450RVS MIG welder with HOBART 2410 MIG  wire feeder s/n: n/a
• ARCWELD 300A welding power source s/n: n/a

SAWS

• BOMAR TRANSVERSE 610.440A CNC horizontal band saw with BOMAR PLC control, 26” throat, 4HP, main vise, shuttle vise, 20” X 22’ infeed conveyor, 22” X 22’ outfeed conveyor, coolant s/n: n/a
• DOALL C-430 horizontal band saw with PLC control, 12” throat, 4.5HP, main vise, shuttle vise s/n: 546-01114
• METLAB MET500H enclosed cut off saw with METCUT-RA PLC control, 12” disc, 4HP s/n: 3347
• EXOTOM STRUERS enclosed cut off saw with 12” disc s/n: 3810361

INSPECTION EQUIPMENT

• ZEISS 2840-18 MD CMM with PC base control, 52” X 40” granite surface plate, RENISHAW PHC9 M9C2 probe controller, RENISHAW PH9 touch probe, travels (approx.) X - 30”, Y – 20”, Z – 13” s/n: CMM900900868

ROLLING STOCK

• (2) TCM PROGG30 LPG forklift with 5150 lb. max capacity, 189” max reach, 3-stage high visibility mast, side shift, cushion tires, 11,728 HRS / n/a HRS (recorded on meter at time of listing s/n: n/a
• NISSAN MCU1F2A3OLU LPG forklift with 5250 lb. max capacity, 187” max reach, 3-stage high visibility mast, side shift, cushion tires s/n: CU1F2-920512
• HYSTER 535XL LPG forklift with 2300 lb. max capacity, 190” max reach, 3 stage high visibility mast, cushion tires 6602 HRS (recorded on meter at time of listing) s/n: 8010OB05735SJ
• SKYJACK SJIII-3219 electric scissor lift with 24V motor, 19’ max reach, 550 lb. capacity, 646HRS (recorded on meter at time of listing) s/n: 24008

FACTORY EQUIPMENT

• DEMAG overhead bridge crane with 11,000 lb. capacity, DEMAG 11,000 lb. capacity hoist, 38’ span, 26’ height under hook s/n: n/a
• DEMAG overhead bridge crane with 7 ton capacity, (2) DEMAG 7 TON  capacity hoists, 38’ span, 26’ height under hook s/n: 80567
• SOS free-standing gantry crane system consisting of (1) SOS 2 TON single girder capacity bridge crane with (2) DEMAG 2 TON electric hoists s/n: 954304, (1) SOS 2 TON capacity single girder bridge crane with (2) STAHL 2 TON capacity hoists s/n: 051249, 116’ overall rail length, 21’ span, 11’ height under hook s/n: n/a
• SOS free-standing gantry crane with 2 TON capacity, single girder bridge crane, (2) DEMAG 4000 lb. capacity hoists, 60’ overall runway length, 22’ span, 12’ height under hook s/n:  95-490-2
• SOS free-standing gantry crane system with 2 TON capacity, single girder bridge, (2) STAHL 2 TON electric hoists, 50’ overall rail length, 26’ span, 12’ height under hook s/n: n/a
• SOS free-standing gantry crane system with 2 TON capacity, single girder bridge, (2) STAHL 2 TON electric hoists, 39’ overall rail length, 22’ span, 13’ height under hook s/n: 0678
• SOS free-standing gantry crane system with 2 TON capacity, single girder bridge, (2) STAHL 2 TON electric hoists, 38’ overall rail length, 18’ span, 12’ height under hook s/n: 1205
• SOS free-standing gantry crane system with 2 TON capacity, single girder bridge, (2) DEMAG 2200 lb. electric hoists, 31’ overall rail length, 21’ span, 13’ height under hook s/n: 15-0497
• DEMAG free-standing jib arm crane with DEMAG 500 lb. capacity hoist, 11’ span s/n: n/a
• DEMAG free-standing jib arm crane with DEMAG 500 lb. capacity hoist, 9’ span s/n: n/a
• STANLEY VIDIMAR STAK-O-SYSTEM parts retrieval system with lift, racks and bins s/n: n/a
• KARDEX INDUSTREIVER automated parts cabinet with 7’ X 17” shelves s/n: n/a

COMPRESSORS

• KAESAR (2008) SIGMA DSD200 air compressor with 200HP, 862CFM, 35,887 HRS run time / 7655 HRS run time (recorded on meter at time of listing) s/n: 1254
• KAESAR (2014) SIGMA SFC905 air compressor with 100HP, 481CFM, 64,710 HRS run time, 55,225 HRS load time (recorded on meter at time of listing) s/n: 1439
• KAESAR TG310 refrigerated air dryer s/n: RK0B110ABB5A2NL08080

ALSO:

• FULL STORES featuring HUGE quantities of electrical parts and components, hydraulic parts and components, electric motors ranging from 5HP to 25HP, transformers, gearboxes, belts, hoses, HUGE quantity of machine tool accessories such as indexing heads, vises, tooling, LISTA cabinets, butcher block work benches, material carts and much more!