Millcraft Woodworking Ltd.

Woodworking Facility with Large Material Inventory!



Wednesday, June 28, 2023

Start Time

10:30 AM EDT


Tuesday, June 27 from 9 AM to 5 PM or by appointment. Please email to arrange.


All assets must be removed no later than Friday, July 14 by appointment only.



FEATURING: WADKIN GA220/5 6-spindle moulder; MICHAEL WEINIG AG. U 23 E 6-spindle moulder; CANTEK LEADERMAC P230-7 6-spindle moulder; (2) OMGA RN 600 12" radial arm saws; MEREEN-JOHNSON (2013) 312-DC-J-OPH gang rip saw; SCM F3A 9" planer; GENERAL 7" table saw; SMI table saw; KING 10" table saw; MILLCRAFT 7" table saw; MILLCRAFT 7" table saw; DELTA 8-1/4" compound mitre saw; MAKITA 2412N 12" abrasive cut-off saw; MFG UNKNOWN tilting shaper; MICHAEL WEINIG K.G. R930 tool grinder; MILLCRAFT double end pedestal grinder; GMC dually flat deck truck; NISSAN MUG1F2A30LV 5,200 LB capacity LPG forklift; KRAEMER TOOL & MFG 60 HP dust collection system; MFG UNKNOWN 15 HP air compressor; TECHQUIP 10 HP air compressor; COMPAIR (2017) CCT050-UP_JB air dryer; SPX DELTECH HG50-115 air dryer; ALSO: Huge selection of dimensional lumber including maple, ash & cherry wood, selection of transformers, electric motors, moulder heads, clamps & more!


  • WADKIN GA220/5 6-spindle moulder with 9.06" x 5.12" max. workpiece dimensions, 6,000 RPM cutterblock spindles, 7.5 HP feed motor, 440V/3PH/60HZ, s/n 9613110
  • MICHAEL WEINIG AG. U 23 E 6-spindle moulder with 9.05" x 4.72" max. workpiece dimensions, straightening spindle speeds to 6,000 RPM, 15 HP motor, 600V/3PH/60HZ, s/n 86282
  • CANTEK LEADERMAC P230-7 6-spindle moulder with (1) universal head, 20 HP motor, 575V/3PH/60HZ, s/n 091402


  • (2) OMGA RN 600 12" radial arm saws with 4 HP motors, s/n 173795; N/A
  • MEREEN-JOHNSON (2013) 312-DC-J-OPH gang rip saw with 24" capacity, 50 HP motor, 575V/3PH/60HZ, s/n MJ-7559
  • SCM F3A 9" planer, s/n V600281
  • GENERAL 7" table saw, s/n N/A
  • SMI table saw, s/n N/A
  • KING 10" table saw with rolling stand, 115V/1PH/60HZ, s/n 013720
  • MILLCRAFT 7" table saw, s/n N/A
  • MILLCRAFT 7" table saw, s/n N/A
  • DELTA 8-1/4" compound mitre saw, 115V/1PH/60HZ, s/n D9610
  • MAKITA 2412N 12" abrasive cut-off saw, s/n 191447E
  • MFG UNKNOWN tilting shaper with 2 HP motor, speeds to 3,450 RPM, s/n N/A


  • MICHAEL WEINIG K.G. R930 tool grinder with speeds to 2,820 RPM, s/n 825/348
  • MILLCRAFT double end pedestal grinder, s/n N/A


  • GMC (1996) C6 TOPKICK flat deck truck with 6.0 liter V8 gas engine, auto, RWD, dually, approx. 100" x 194" deck, 8,100 LB GAWR front, 15,000 LB GAWR rears, 452,285 KM (recorded on meter at time of listing), VIN 1GDG6H1P6TJ502481
  • NISSAN MUG1F2A30LV 5,200 LB capacity LPG forklift with 187" max. vertical reach, side-shift, cushion tires, s/n UG1F2-9L2181


  • KRAEMER TOOL & MFG 60 HP dust collection system with 16,200 CFM capacity, upgraded NORTHRIDGE ELECTRIC 13691 automatic diverting discharge system, TELEMECANIQUE controls, s/n N/A
  • MFG UNKNOWN 15 HP air compressor, s/n N/A
  • TECHQUIP 10 HP air compressor with TELEMECANIQUE motor starter, s/n N/A
  • COMPAIR (2017) CCT050-UP_JB air dryer with 50 SCFM nominal flow rate, 115V/1PH/60HZ, s/n 17R028284/17
  • SPX DELTECH HG50-115 air dryer with 50 SCFM @ 100 PSIG rated capacity, s/n HG050A1150805010


  • Huge selection of dimensional lumber including maple, ash & cherry wood; selection of transformers; electric motors; moulder heads; clamps & more!


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.


A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.


  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."



  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.



The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.


Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.





*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005 or