J & J Tool & Mold Limited

Pristine & Late Model CNC Mold Making Facility



Thursday, August 8, 2024

Start Time

10:30 AM EDT


Wednesday, August 7 from 9 AM to 4 PM EDT.


All assets must be removed no later than Thursday, August 29 by appointment only. Rigging details to follow.



FEATURING: RODERS TEC (REMANUFACTURED IN 2018) RP 800, high speed CNC machining center; AWEA (2014) AF-1250, high speed CNC vertical machining center; (2) AWEA (2012) AF-1000, high speed CNC vertical machining centers; MACRODYNE (2010) MPS-50, 4-post hydraulic spotting press w/ shuttle table & tilting platen; SODICK (2019) ALN 800G, linear motor drive wire type EDM; SODICK K1C, small hole drilling EDM; CHARMILLES ROBOFORM 50, ram type EDM; CHARMILLES ROBOFORM 20, ram type EDM; TOS 3” table type HBM; TOS FGSV 32, bed/ram type heavy duty milling machine; TOS SN50B, engine lathe; TOS BU 28-630, universal cylindrical grinder; ASQUITH 3’ radial arm drill; (5+) FIRST vertical milling machines; FLEX-ARM tapping unit; BAXTER VERTICUT horizontal saw; OKAMOTO 12-24ST, hydraulic surface grinder; CHEVALIER FSG-3A1224H, hydraulic surface grinder; (3) CHEVALIER FSG-SERIES, surface grinders; THERMO GRIP (2012) ISG2200-WK, heat shrink tool setter; TRINCO shot blast cabinet; FORD (2019) F-550 XL, 6.7L POWER STROKE TURBO DIESEL flatbed dually truck; FORD (2011) F-350 super duty dually pick up truck; ATLAS COPCO (2017) GA30VSD+FF, 40HP air compressor; HYSTER 4,500lb capacity LPG forklift; STARRET optical comparator; ALSO FEATURING: HUGE QTY of high precision perishable tooling, quick set up machining fixtures, general manufacturing & factory support equipment, office furniture & MUCH MORE!


  • MACRODYNE (2010) MPS-50, 50-ton capacity 4 post hydraulic spotting press with PLC control, 53” stroke, 63” daylight opening, 65” x 42” tilting platen, left to right 65” x 42” shuttle table, 20HP s/n: 101071-MPS-50


  • SODICK (2019) ALN800G, CNC flat rigid linear motor driven, high precision Wire type EDM with SODICK CNC control, smart pulse wire control, 40.94” x 59.05” work tank, travels X – 31.50”, Y – 23.62”, Z – 19.69”, U – 7.87”, V – 7.87”, SODICK CST150A-001A chiller, HEIDENHAIN absolute glass scale feedback, THK SSR caged frictionless guideways, jet annealing auto high speed wire threader, jumbo 44LBS feeder, 3393 cutting hours s/n: T0010


  • CHARMILLES ROBOFORM 50, CNC sinker type EDM with CHARMILLES CNC control, 31.50” x 21.5” x 14.5” work tank, 19.5” x 15.5” table size, travels X – 13.5”, Y – 9.8”, Z – 11.8”, DIMPLEX ST1000 chiller s/n: 650017
  • CHARMILLES ROBOFORM 20, CNC sinker type EDM with CHARMILLES FORM20 CNC control, 26" x 18" x 9.5” work tank, 15” x 12” table size, travels X – 11.8”, Y – 9.8”, Z – 9.8”. ADVANTAGE 1K1A21HF chiller s/n: 150625
  • SODICK K1C, small hole drilling EDM with SODICK X ALT SD52 control, 13” x 10” table, travels X – 7.87”, Y – 11.81”, Z – 11.81”, W – 9.84” s/n:
  • SINTRON ED252, sinker type EDM with ECLIPSE 14” x 6” magnetic base plate s/n: 8701013


  • RODERS (REMANUFACTURED 2018 BY RODERS USA) TEC RP800, high speed CNC vertical machining center with RODERS CNC control, 35.5” x 27.5” t-slot table, travels X – 31.5”, Y – 23.6”, Z – 15”, 23HP spindle, speeds to 36,000RPM, HSK50, 30ATC, coolant, new spindle, way covers and belows s/n: 88501-5
  • AWEA (2014) AF1250, CNC vertical machining center with MITSUBISHI M70 CNC control, 53” x 24” t-slot table, travels X – 49.2”, Y – 24.4”, Z – 24.4”, 20HP spindle, speeds to 15,000RPM, BT40, 24ATC, coolant s/n: 1250-14051
  • (2) AWEA (2012) AF-1000, CNC vertical machining center with MITSUBISHI M70 CNC control, 47” x 22” t-slot table, travels X – 40”, Y – 22”, Z- 25”, 11HP spindle, speeds to 8000RPM, BT40, 24ATC, coolant s/n: 1000-11094 / 1000-12001


  • TOS BU28, universal cylindrical grinder with 6” 3 jaw chuck, 15.5” wheel, speeds to 710RPM, coolant s/n: 58763
  • CHEVALIER FSG-3A1224H, hydraulic surface grinder with 24” x 12” magnetic base plate, 14” wheel, speeds to 1750RPM, 5HP, coolant s/n: P3857006
  • OKAMOTO 12-24ST, hydraulic surface grinder with 24” x 12” magnetic base plate, 12” wheel, speeds to 1710RPM, 5HP, coolant s/n: 3210
  • (2) CHEVALIER FSG-618M, surface grinder with 18” x 6” magnetic base plate, 6” wheel, speeds to 3450RPM, 2HP s/n: A3354005 / A3884044
  • FREEPORT 5GS-618, surface grinder with 18” x 6” magnetic base plate, 6” wheel, 2HP s/n: 411044
  • RICH BROTHERS HA, surface grinder with 12” x 7” magnetic base plate, 6” wheel, speeds to 3600RPM, 1.5HP, coolant s/n: 21211


  • TOS SN50B, engine lathe with 12” 3 jaw chuck, 40” in between centers, 18” swing, 2” bore, speeds to 2000RPM s/n: 05010082041
  • MONARCH 10BE, tool room lathe with 6” 3 jaw chuck, 20” in between centers, 12.5” swing, 1.5” bore s/n: 17459
  • TOS WH63, horizontal boring mill with 35” x 32” t- slot table, 7.5HP, speeds to 1800RPM, ACURITE III DRO s/n: 60-02
  • TOS KURIM FGSV32, universal mill with 55” x 10” t-slot table, speeds to 1800RPM, power traverse, ACURITE 2 axis DRO s/n: 23100293
  • LILIAN (2004) 11307, universal mill with 50” x 10” t-slot table, 3HP, speeds to 4200RPM, ACURITE 2 axis DRO s/n: 4VH
  • FIRST LC135VS, universal mill with 50” x 10” t-slot table, 3HP, speeds to 4500RPM, ACURITE 2 axis DRO s/n: 850314
  • (2) FIRST LC1 ½ VS, universal mill with 42” x 9” t-slot table, 2HP, speeds to 4500RPM, ACURITE 2-axis DRO s/n: 11117938/602234475
  • ASQUITH ODI, 4’ radial arm drill with speeds to 1130 rpm, 42” x 33” x 20” t-slot box table s/n: ODI.1178
  • BAXTER VERTICUT 280S, vertical bandsaw with 20” throat, 15HP s/n: 5456
  • ER MAIER KM1012, vertical bandsaw s/n: N/A
  • TRINCO 48X24SLBP, sand blast cabinet s/n: N/A
  • ALEXANDER 2CG, tool and cutter grinder s/n: 3159
  • STARRET SIGMA KB4000, optical comparator with 17” x 3” t-slot table, 2 axis DRO s/n: 3177


  • FORD (2019) F550, flat deck truck with 6.7L V8 POWERSTROKE diesel engine, automatic transmission, single cab, 12’ x 8’ steel deck, Bluetooth, AM/FM radio, cruise, 158,435KM (recorded on odometer @ time of listing) VIN: 1FDUF5GT0KEE47376
  • FORD (2011) F350 XLT, pick up truck with 6.2V8 gas engine, automatic transmission, single cab, 8’ box, power win/lock/mirror, keyless entry, AM/FM radio VIN: 1FTRF3C62BEB68235
  • HYSTER S50XL, LPG forklift with 5150lbs capacity, 84” max reach, side shift, cushion tires 468 hours (recorded on meter @ time of listing) s/n: C187V130795


  • DEVILBISS 25HP air compressor s/n: N/A
  • TORIT MODEL SDF6, 10HP 6 bag dust collector s/n: 1G3432220-01
  • TORIT V515CC, 1.5HP dust collector s/n: 1G372225-2
  • TORIT MODEL 75, dust collector s/n: N/A


  • Huge quantity or perishable tooling, bt40 tool holders, machine vises, standard vises, indexing heads, magnetic base plates, inspection equipment, granite surface plates, workbenches, tool boxes, shelving units, die carts, hardware, office furniture and MUCH MORE!


J&J Tool Brochure

Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.


A Buyer's Premium of 19% for all Webcast (Remote) bidders will apply at this sale.
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.


  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."



  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.



The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.


Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.





*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com