Surplus Assets of

Windsor Salt Ltd.

Evaporated Salt Production Facility

 

Date

Thursday, February 23, 2023

Start Time

9:30 AM MST

Inspection

BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange a date and time.

Removal

All assets must be removed no later than Wednesday, March 15 BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange.

Industry

Chemical Processing
 

Complete High-Grade, High-Purity Evaporated Salt Manufacturing Plant from a Former Solution Mining Facility. FEATURING: Process equipment including a large selection of GOULDS stainless steel and chemical-resistant pumps; (8+) KASON stainless steel vibratory shaker screens, HAZEMAG N-10-B crusher; JET-ZONE natural gas-fired evaporative drying oven Stainless steel food grade belt and auger conveyors, bucket elevators, PROCECO SPC-300 clarifier; (3) LIGHTNIN single-action mixer agitators; Large-capacity stainless steel brine storage tanks; Factory support equipment comprising INGERSOLL RAND (2019) rotary screw air compressor, INGERSOLL RAND (2018) refrigerated air dryer, UNIWASH wet type dust collector, blower fans; Plant support equipment including EATON VFDs, EATON SQUARE-D MCC panels with controls; Maintenance shop featuring ZMM engine lathe, HYD-MECH S20 horizontal band saw, MILLER TRAILBLAZER 302 gas-powered digital welder generator, MILLER DIMENSION 302 welder with cables and gun, RIDGID 1224 powered pipe and tube threader, selection of power tools, hand tools, welding fume extractors, raw material stock ferrous and non-ferrous bar, tube, square, pipe stock; WHEEL-TRONIC 6,000 lbs capacity 4-post car hoist; KONE 10-ton capacity 34’ span radio-controlled overhead bridge crane; MRO STORES including electric motors, pumps, valves, BEARINGS, oil seals, consumables, and supplies; GMC (2012) 2500 HD 4x4 extended cab pickup truck; Pallet racking, shelving units, workbenches with vises, (5+) SCOTT SCBA emergency breathing air apparatus, (10+) JUSTRITE fireproof cabinets, and MORE!

SALT PROCESSING EQUIPMENT

  • PROCESCO SPS-300 water clarifier with 300 GPM max flow, 18 minute retention time at max flow rate, design solids removal 95+% at 200 PPM influent, 6" sludge drain valve with electric actuator, (2) flocculators, VFD and PLC controls s/n 12290-01
  • SWECO XS72Y1021066BT0NSDTLHC vibro-energy vibratory screen separator with 5 HP electric motor, 575V/3PH/60HZ, s/n 204081-A11/19
  • KASON (2012) 772-3-316SS stainless steel vibrating screen separator, s/n n/a
  • (2) KASON VIBROSCREEN 48" single deck stainless steel vibrating screen separators, s/n n/a, n/a
  • DOMINION ENGINEERING WORKS LIMITED 750 ton capacity salt block press, s/n n/a
  • MFG UNKNOWN rotary mixer/blender with 0.75 HP electric motor, s/n n/a
  • MUNSON X HD2 1/2-5-S316 batch mixer with 15 HP electric motor, load cells with DRO, bottom discharge with pneumatic actuated gate, SCR-20 variable speed auger feeder, 575V/3PH/60HZ, s/n 160509
  • MFG UNKNOWN brine pump, s/n n/a
  • (3) LIGHTNIN 86-C-40 GREEY mixers with BALDOR RELIANCE 50 HP drive motor, s/n 279970-800-242, 970800, n/a
  • BEMIS-WAY bag filling station with weigh scale and MAGNETIC PRODUCTS INC DMU-212-QCS magnetic separator, s/n 361092462D
  • JETZONE fluidized bed dryer/cooler, s/n n/a
  • HAZEMAG N-10-B crusher with WESTINGHOUSE 10 HP drive motor, s/n HC-305

FACTORY SUPPORT EQUIPMENT

  • UNI-WASH UC-75 wet type dust collector and down draft bench with 30 HP electric motor, 575V/3PH/60HZ, s/n 03270
  • N.R. MURPHY bag-type dust collector with 25 HP electric motor and fan, s/n n/a
  • INGERSOLL RAND R90N-W 125 HP air compressor with 1,889 RPM max. operating speed, 145 PSIG max. discharge pressure, 21,101 hours (recorded on meter at time of listing), 575V/3PH/60HZ, s/n MOX1001468
  • INGERSOLL RAND SSR HP-100 100 HP air compressor with 1775 RPM max. operating speed, 140 PSIG max. discharge pressure, 49,796 hours (recorded on meter at time of listing), 460V/3PH/60HZ, s/n CK2121U99154
  • INGERSOLL RAND HLA6001HE0AHOX air dryer with 150 PSIG max inlet, 115V/60Hz/1PH s/n WCH1041307
  • CANATURE water softener tank system with (3) 36”x72” pressure vessels, (3) CANATURE digital metering devices, s/n 37025054NBS0001
  • FOSTER WHEELER D-TYPE natural gas fired boiler with 50 MMBtuh max. input rating, 10 PSIG max. inlet pressure, PROCESS COMBUSTION SYSTEMS FSG-YB110-IR burner management system, s/n 11160
  • WULFTEC WHPA-300 pallet wrapper with ALLEN-BRADLEY PANELVIEW PLUS 600 display, EVI 6 KVA transformer, 575V/3PH/60HZ, s/n 18640-1-0105

CONVENTIONAL MACHINERY

  • ZMM CU401 gap bed engine lathe with 12" 3 jaw chuck, 64" between centers, 21" swing over bed, 3.75" bore, speeds up to 2000 RPM, coolant s/n CV401150072152
  • HYD-MECH S-20 SERIES II automatic horizontal band saw with hydraulic clamping, coolant, 600V/60Hz/3PH. s/n 61097201
  • MODIGS RBM 28B radial arm drill with speeds up to 1535 RPM s/n 49787
  • MILLER TRAILBLAZER 302 gas powered CC/CV, AC/DC welder with 10,500 watt generator with cables and gun s/n LHO15326
  • MILLER DIMENSION 302 CC/CV-DC TIG/ARC/MIG welder with cables and gun s/n LC444344
  • OSKAR flex arm fume extractor with blower motor and control switch, s/n n/a

OVERHEAD CRANE

  • KONECRANES double girder top running dual motor bridge crane with 10 ton capacity, 35' span, 90' busbar, 180" under hook, (2) TELE XAC-A08 remote control pendants, s/n R11726(A13371)

ALSO:

  • CHEVROLET (2012) 2500 HD SILVERADO extended cab 4X4 pickup truck; dumping hoppers; air receiver tanks; fireproof cabinets; ladders; shop fans; platform scales; MCC control cabinets; SACFORM scaffolding components; hand tools; power tools; ferrous & non-ferrous material; LARGE ASSORTMENT of ELECTRIC MOTORS, MROs, SPARE PARTS & BEARINGS; laboratory equipment including glassware, hot plates, vacuum pumps; (30+) sections of medium duty pallet racking; business machines; office furniture and MUCH MORE!

LIVE WEBCAST ONLY


Windsor Salt Windsor Salt Windsor Salt Windsor Salt Windsor Salt Windsor Salt Windsor Salt Windsor Salt Windsor Salt Windsor Salt Windsor Salt Windsor Salt

Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN CAD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 
*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. Contact info@corpassets.com for details. The Buyer's Premium does not apply to posted rigging fees.