Vale – Sudbury #7

Underground Mining Assets, Construction Equipment & MRO Spares

 

Date

Wednesday, September 28, 2022

Start Time

10:30 AM EDT

Inspection

BY APPOINTMENT ONLY. Monday, September 26 from 9AM - 10AM & 1PM - 2PM. *

Removal

All assets must be removed no later than Friday, October 28 by appointment only. *Full removal details below.

Location

155 Balsam Street, Copper Cliff, Ontario, Canada, P0M 1N0

Industry

Mining Equipment
 


Add to Calendar
 

FEATURING: CATERPILLAR 950F front end wheel loader with approx. 11,500 lb. rated operating capacity, 106” bucket attachment, 70” fork attachment, 60” fork attachment, ONLY 297 hours on meter; WALDON 4500B sub-compact front end loader with 1,400 lb. operating capacity, 48” bucket attachment, ONLY 479 hours on meter; JOHN DEERE 650G crawler dozer with 98” blade, 1,826 hours on meter; CASE M845 DHP MINE MASTER grader with 142” blade; VOLVO A25D articulated dump truck with 17.01 yrd/3 max. capacity (heaped); ATLAS COPCO ST14  underground scoop loader with 31,300 lb. capacity, 105” bucket, ATLAS COPCO touch-screen rig control system, 2,620 hours on meter, (NEW BATTERIES installed Spring 2022); ATLAS COPCO ST8B underground scoop loader with 29,900 lb. capacity, 103” bucket, 3,644 hours on meter; ATLAS COPCO ST7 underground scoop loader with 20,000 lb. capacity, 82” bucket, ATLAS COPCO touch-screen rig control system; MARCOTTE MINING M40 platform scissor lift truck with 4,000 lb. max. capacity, 140”x104” platform, ONLY 996 hours on meter; CASE 1825B skid steer loader with 880 lb. capacity, 42” bucket; DURATECH HAYBUSTER 2655 tow-behind bale processor with 6’x6.5’ dia. 2200 lb. capacity; CUBEX S112 136 HP tow-behind screw booster compressor; (2) CUBEX ORION ITH crawler drills with compressor; MTI CJ-2H underground 2-boom electro-hydraulic jumbo drill with approx. 16' drill; PRINOTH (2012) BR350 crawler snow groomer with AG-NAV GPS, back-up camera, 163” plow attachment, tiller attachment, 3,176 hours on meter; OMEGA (2008) UG44T-16MS 4x4 outdoor diesel forklift with 16,000 lb. capacity, 99” max. lift height, 2,101 hours on meter; HYSTER (2013) 60 5,000 lb. capacity LPG forklift with ONLY 138 hours on meter; TENNANT 6200 ride-on LPG floor sweeper; INTERNATIONAL (2009) WORKSTAR 7600 tandem axel water truck; STERLING (2008) LT7500 hydroseeder truck with FINN TITAN 400-6 hydroseeder; FORD (2008) F250 SUPER DUTY XLT extended cab pickup truck with 4X4, 118,969 km on odometer; FORD (2013) F250 SUPER DUTY XLT 4-door pickup truck with 4x4, lift gate; EXCALIBUR (2012) tandem axel utility trailer with 168”x96” deck, removable ramps; HIGHLAND (2008) single axel utility trailer with 120”x98” deck; (2) SUZUKI (2019) KING QUAD 400FSI 4x4 ATVs; SUZUKI (2009) KING QUAD 400FSI 4x4 ATV; SUZUKI (2008) KING QUAD 400FSI 4x4 ATV; POLARIS (2019) SPORTSMAN 570 BIG BOSS 6X6 ATV; (2) POLARIS (2018) SPORTSMAN 570 BIG BOSS 6X6 ATVs; POLARIS (2014) SPORTSMAN 800 BIG BOSS 6X6 ATV; (2) POLARIS (2012) SPORTSMAN 800 BIG BOSS 6X6 ATVs; POLARIS (2010) SPORTSMAN 800 BIG BOSS 6X6 ATV; (2) KAWASAKI (2009) BRUTE FORCE 650 4x4 ATVs; ARCTIC CAT (2008) TRV 4x4 ATV; (3) ARCTIC CAT (2007) TRV 4x4 ATVs; ARGO (2006) CENTAUR 8x8 off-road utility vehicle with removeable tracks, snow plow blade attachment, removeable winter tracks; ALSO FEATURING A LARGE QUANTITY OF: CATERPILLAR & ATLAS COPCO spare parts including radiators, oil filters, air filters, hydraulic hoses; (15+) ALLIS-CHALMERS & ABB high voltage air power circuit breakers; shop supplies; NGK, TIMKEN & SAG roller bearings; EPIROC & ATLAS COPCO 250hr-1000hr service kits; CM electric hoists; LISTA tool cabinets; electrical hardware & components; ENERPAC industrial hydraulic unit with rams; and MUCH, MUCH MORE!

* IMPORTANT INFORMATION REGARDING INSPECTION AND REMOVAL *

**FOR INSPECTION AND REMOVAL MANDATORY CLASS 3 HIGH VISIBILITY SAFETY APPAREL (HVSA) WILL BE ENFORCED. APPAREL INCLUDES: Steel Toe Footwear, Hard Hats with Retro-Reflective Tape, Safety Glasses, as well as 360° HVSA Coveralls.

*Vale will hold two inspection visits as per the schedule below, on September 26, 2022:

  • Trip 1 will be 9 AM to 10 AM
  • Trip 2 will be 1 PM to 2 PM

    •   

If you plan to inspect the assets, an appointment must be made. There will be no exceptions. All interested parties must confirm their visit, by Friday, September 23 at 2 PM. The request/confirmation must be sent to the following email: assetsales@vale.com

 
For removal, Vale will provide a forklift with an operator to load all items on pallets. They will not be responsible for loading of any unpalletized lots. It will be the buyers’ responsibility to make all arrangements required for loading items which cannot be loaded with a forklift and require specialized equipment such as, cranes, boom trucks and load vehicles.
 
Please note: Only transport that has been certified and pre-qualified with Vale may enter the site to remove items. The following companies have already been certified and can be contacted to arrange transportation for items purchased at the auction:
 
Manitoulin Transport: 705-692-4703
Johnny's Transportation: 705-855-8000
Consolidated Logistics (CLI): 705-682-4254

CONSTRUCTION EQUIPMENT

  • CATERPILLAR (1991) 950F front end wheel loader with approx. 11,500 lb. rated operating capacity, 70” fork attachment, fully-enclosed cab with CB radio, 106” bucket attachment, 60” fork attachment, s/n: 7ZF00408
  • JOHN DEERE 650G crawler bulldozer with JOHN DEERE 4045TT007 diesel engine, 98” blade, 1,826 hours (recorded on meter at time of listing), s/n: T0650GH767839
  • VOLVO A25D articulated dump truck with D9BAAE3 9.4L diesel engine, 17.01 yrd/3 max. capacity (heaped), climate control, heated seat, AM/FM radio with CD, s/n: 2572159
  • CASE 1825B skid steer loader with 880 lb. capacity, KUBOTA V1505-E diesel engine, 42” bucket, s/n: JAF0-44375
  • KOMATSU (2006) SK10205N skid steer loader with approx. 2000 lb. operating capacity, bucket attachment, s/n: n/a (LOCATED IN THOMPSON, MB)

MINING EQUIPMENT

  • ATLAS COPCO (2006) ST14 underground scoop loader with 31,300 lb. capacity, diesel engine, 105” bucket, ATLAS COPCO touch-screen rig control system, fully-enclosed cab with climate control & AM/FM radio, 2,620 hours (recorded on meter at time of listing), (NEW BATTERIES installed Spring 2022), s/n: AVO06X037
  • ATLAS COPCO ST8B underground scoop loader with 29,900 lb. capacity, DETROIT DIESEL SERIES 60 diesel engine, 103” bucket, 3,644 hours (recorded on meter at time of listing), s/n: C43077-1
  • ATLAS COPCO (2011) ST7 underground scoop loader with 20,000 lb. capacity, diesel engine, 82” bucket, ATLAS COPCO touch-screen rig control system, fully-enclosed cab with climate control, s/n: AVO11X053/8997281500
  • WALDON 4500B sub-compact front end loader with 1,400 lb. operating capacity, 4-cyldinder diesel engine, 48” bucket attachment, 479 hours (recorded on meter at time of listing), s/n: n/a
  • MARCOTTE MINING M40 platform scissor lift truck with 4,000 lb. max. capacity, diesel engine, 140”x104” platform, 996 hours (recorded on meter at time of listing), s/n: 8183549
  • (2) CUBEX ORION ITH crawler drills with compressor, s/n: n/a, n/a
  • MTI CJ-2H underground 2-boom electro-hydraulic jumbo drill with approx. 16' drill, s/n: 1269
  • CASE M845 DHP MINE MASTER grader with CUMMINS diesel engine, 142” blade, s/n: n/a
  • CUBEX (2012) S112 136 HP tow-behind screw booster compressor with 600V, 6,956 hours (recorded on meter at time of listing), s/n: n/a

SUPPORT EQUIPMENT

  • OMEGA (2008) UG44T-16MS 4x4 outdoor diesel forklift with 16,000 lb. capacity, 99” max. lift height, PERKINS diesel engine, outdoor all-terrain tires, 70” forks, fully-enclosed cab with fan & CB radio, spare 70” forks, 2,101 hours (recorded on meter at time of listing), s/n: OM704T16FCS
  • HYSTER (2013) 60 5,000 lb. capacity LPG forklift with 3-stage mast, side shift, multi-surface tires, 138 hours (recorded on meter at time of listing), s/n: A117B34845K
  • TOYOTA (2010) 8FGU32 6600 lb. capacity diesel forklift with 132” max. lift height, s/n: n/a (LOCATED IN THOMPSON, MB)
  • (2) TOYOTA (2010) 8FGU25 4900 lb. capacity LPG forklifts with 132” max. lift height, s/n: n/a, n/a (LOCATED IN THOMPSON, MB)
  • TENNANT 6200 ride-on LPG floor sweeper with (2) oscillating brushes, 81 hours (recorded on meter at time of listing), s/n: 6200-3473
  • DURATECH HAYBUSTER 2655 tow-behind bale processor with 6’x6.5’ dia. 2200 lb. capacity, s/n: 2614109555
  • EXCALIBUR (2012) tandem axel utility trailer with 168”x96” deck, removable ramps, VIN: 29FL162XXXX75192
  • HIGHLAND (2008) single axel utility trailer with 120”x98” deck, VIN: 2H9S6A10091HM6067
  • WORK PROJECT (2003) tri-axel trailer with 450”x 96” deck, VIN: n/a (LOCATED IN THOMPSON, MB)

VEHICLES

  • INTERNATIONAL (2009) WORKSTAR 7600 tandem axel water truck with CATERPILLAR C13 diesel engine, ALLISON automatic transmission, air brakes, A/C, AM/FM radio with CD, CB radio, VIN: 1HTWYSBT79J142362
  • STERLING (2008) LT7500 hydroseeder truck with FINN TITAN 400-6 hydroseeder, CUMMINS diesel engine, EATON FULLER 10 speed manual transmission, air brakes, A/C, AM/FM radio with CD, VIN: 2FZHATBS38AAB8980
  • FORD (2008) F250 SUPER DUTY XLT pickup truck with 5.4L V8 engine gas engine, automatic transmission, power steering, 4X4, extended cab, roll bar, A/C, AM/FM radio with CD, power windows, power locks, 118,969 km (recorded on odometer at time of listing), VIN: 1FTSX21538EA58015
  • FORD (2013) F250 SUPER DUTY XLT 4-door pickup truck with 6.2L 8 cylinder gas engine, automatic transmission, power steering, 4x4, full cab, lift gate, power windows, power locks, A/C, AM/FM radio with CD, VIN: 1FT7W2B64DEA44912
  • FORD (1991) E350 rescue response vehicle, VIN: n/a (LOCATED IN THOMPSON, MB)

OFF-ROAD VEHICLES

  • PRINOTH (2012) BR350 crawler snow groomer with CATERPILLAR C9 diesel engine, AG-NAV GPS, back-up camera, 163” plow attachment, fully-enclosed cab with climate control, AM/FM radio with CD, tiller attachment, 3,176 hours (recorded on meter at time of listing), s/n: 908911126
  • ARGO (2006) CENTAUR 8x8 off-road utility vehicle with DAIHATSU DM950DTH diesel engine, removeable tracks, fully-enclosed cab with heater, winch, snow plow blade attachment, removeable winter tracks, VIN: 2DG0000YX6NT12313
  • SUZUKI (2019) KING QUAD 400FSI 4x4 ATV with 316 km (recorded on odometer at time of listing), VIN: 5SAAK4CA6L7100029
  • SUZUKI (2019) KING QUAD 400FSI 4x4 ATV with 1,103 km (recorded on odometer at time of listing), VIN: 5SAAK4CA1L7100035
  • SUZUKI (2008) KING QUAD 400FSI 4x4 ATV with 2,445 km (recorded on odometer at time of listing), VIN: 5SAAK49A897100176
  • SUZUKI (2008) KING QUAD 400FSI 4x4 ATV with 2,711 km (recorded on odometer at time of listing), VIN: 5SAAK49A987100394
  • POLARIS (2019) SPORTSMAN 570 BIG BOSS 6X6 ATV, VIN: 4XAS6E572KB313558
  • POLARIS (2018) SPORTSMAN 570 BIG BOSS 6X6 ATV with 809.5 hours (recorded on odometer at time of listing), VIN: 4XAS6E574JB312202
  • POLARIS (2018) SPORTSMAN 570 BIG BOSS 6X6 ATV, VIN: 4XAS6E578JB306290
  • POLARIS (2014) SPORTSMAN 800 BIG BOSS 6X6 ATV with 791 km (recorded on odometer at time of listing), VIN: 4XACF76A3EB189265
  • POLARIS (2012) SPORTSMAN 800 BIG BOSS 6X6 ATV, with 0.7 hours (recorded on meter at time of listing), VIN: 4XACF76A1CB436540
  • POLARIS (2012) SPORTSMAN 800 BIG BOSS 6X6 ATV with 1,350 km (recorded on odometer at time of listing), VIN: 4XACF76A5CB436654
  • POLARIS (2010) SPORTSMAN 800 BIG BOSS 6X6 ATV with 313 hours (recorded on meter at time of listing), VIN: 4XACL76A6ADA34XX
  • KAWASAKI (2009) BRUTE FORCE 650 4x4 ATV with 2,682 km (recorded on odometer at time of listing), VIN: n/a
  • KAWASAKI (2009) BRUTE FORCE 650 4x4 ATV, VIN: n/a
  • ARCTIC CAT (2008) 500 TRV 4x4 ATV VIN: with 2,774 km (recorded on odometer at time of listing), VIN: 4UF08ATV08T210560
  • ARCTIC CAT (2007) 500 TRV 4x4 ATV, VIN: XXXXXXXXX7T230864
  • ARCTIC CAT (2007) 650 TRV 4x4 ATV with 2,463 km (recorded on odometer at time of listing), VIN: 4UF07ATV97T245163
  • ARCTIC CAT (2007) 400 TRV 4x4 ATV with 3,486 km (recorded on odometer at time of listing), VIN: 4UF07ATV07T245486

ALSO:

  • LARGE QUANTITY OF: CATERPILLAR & ATLAS COPCO spare parts including radiators, oil filters, air filters, hydraulic hoses; (15+) ALLIS-CHALMERS & ABB high voltage air power circuit breakers; shop supplies; NGK, TIMKEN & SAG roller bearings; EPIROC & ATLAS COPCO 250hr-1000hr service kits; CM electric hoists; LISTA tool cabinets; electrical hardware & components; ENERPAC industrial hydraulic unit with rams; mobile equipment control joysticks, operator seats & spare parts; electric motors; gear boxes; overhead bay lights; hand tools; mine cart decks with swivel bases; lifting supplies; DONALDSON air filters; SCOOP camera system; mine radios; PPE, welding power sources; first aid supplies; fall-arrest equipment; KUBOTA forklift parts and MUCH MORE!

ADDITIONAL ITEMS LOCATED IN THOMPSON, MB:

  • MILLER MIGHT evacuation system with self-retracting life line, MILLER 3-piece portable base, (2) MILLER DURA HOIST safety systems; FLOWSERVE titanium impellers; WEIR impellers; 5 HP - 200 HP electric motors; SEW EURODRIVE gearboxes with motors; MITSUBISHI Model M4500-250 250 HP VFD; SELECTION of CATERPILLAR spare parts; MILLER welding power sources; conveyor components; WIDE VARIETY of mobile equipment spare parts; hydraulic & pneumatic cylinders; liners; electrical components and MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.
DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS
MODALITÉS ET CONDITIONS DE VENTE

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN CAD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.
Download Full Payment Information
Download Buyer Deposit Form
CAD Wire Transfer Details
USD Wire Transfer Details
GBP Wire Transfer Details
EUR Wire Transfer Details

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.
 
Please read our Full Terms & Conditions for Removal Requirements

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

Rigger Release Authorization Form

 

Sample of 'Certificate of Insurance' or 'CI'

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com		 Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com