Late Model & Multi-Axis CNC Machining Facility

Mark Your Calendars!

 

Date

Thursday, August 11, 2022

Start Time

10:30 AM EDT

Inspection

Wednesday, August 10 from 9 AM to 4 PM. Please email info@corpassets.com if you need an alternate date & time.

Removal

All assets must be removed no later than Friday, August 26 by appointment only.

Industry

Machining
 

 

FEATURING: DOOSAN (2020) DNM 750L/50 II 4-AXIS CNC vertical machining; FADAL (2018) VMC 4020B-II CNC vertical machining center; NISSIN SNK PRODIGY MAX-410V CNC vertical machining center; DOOSAN (2015) PUMA GT2600M CNC turning and live milling center; DOOSAN (2015) LYNX 220LMC CNC turning and live milling center; ATS (2015) EC-565L automatic bar feeder; DOOSAN (2015) LYNX 220LC CNC turning center; HARTFORD 2 V vertical milling machine; COSEN (2012) C-260NC automatic horizontal metal cutting bandsaw; STARTRITE 316 H vertical metal cutting bandsaw; CHICAGO PNEUMATIC (2015) QRS25HP 25 HP air compressor; CHICAGO PNEUMATIC (2015) CPX 100(A6)UL refrigerated air dryer; Large selection of machine tool accessories including live milling and turning tools; (100+) CAT40, CAT50 & BT40 tool holders; machine vises; rotary indexing heads; angle plates; die-lifting carts; pedestal-type grinders; perishable tools including end mills, drills, reamers, taps and cutters; carbide insert cutters and selection of carbide inserts; hand tools; shop supplies; work benches and more!

THE EXCLUSIVE RIGGER FOR THIS SALE IS:

National Rigging and Transportation
Darren Chapman
O: 905-788-1110 • C: 905-704-9011
darren@nationalrigging.com


*For everyone’s safety removal at this site is conducted strictly by appointment only. All machinery buyers must contact darren@nationalrigging.com to set their pick-up appointments upon payment in full.

CNC VERTICAL MACHINING CENTERS

  • DOOSAN (2020) DNM 750L/50 II 4-AXIS CNC vertical machining center with DOOSAN-FANUC I SERIES CNC control, 30” X 85” t-slot table, 3.300 LB max table load capacity, travels: X-85”, Y-30”, Z-25.59”, A-360 degrees, 7.87”-33.46” distance spindle nose to table top, spindle speeds to 10,000 RPM, CAT50 spindle taper, 30-station ATC, 29 HP, probing system with RENISHAW OMP 60 touch probe, through spindle coolant, chip augers, GSA (2019) CNC-250R 4TH axis rotary table with 10.5” 3-jaw chuck and GSA TS-B185 tailstock (may be sold separately), LNS 57519131 chip conveyor, approx. 824 spindle hours (recorded at time of listing), 220V/3PH/50-60HZ, s/n MV0099-000087
  • FADAL (2018) VMC 4020B-II CNC vertical machining center with FADAL 64MP CNC control, 20” x 47” t-slot table, 1,320 LB maximum table load capacity, travels: X-40” , Y-20”, Z-20”,  5”-25” distance spindle nose to table top, spindle speeds to 10,000 RPM, CAT40 spindle taper, 24-station ATC, 15 HP, coolant, HABOR R407C chiller, chip auger, chip conveyor, 208-230V/3PH/60HZ, s/n 120181000202
  • NISSIN SNK PRODIGY MAX-410V CNC vertical machining center with FANUC SERIES OI-MB CNC control, 17.7” X 31.5” t-slot table, 1100 LB max table load capacity, travels: X-24”, Y-16.1”, Z-16.1”, spindle speeds to 10,000 RPM, BT40 spindle taper, 14-station ATC, coolant, chip auger, 208V/3PH/60HZ, s/n 4100016

CNC TURNING & LIVE MILLING CENTERS

  • DOOSAN (2015) PUMA GT2600M CNC turning and live milling center with DOOSAN-FANUC I SERIES CNC control, 24.80" swing over bed, 18.11” swing over saddle, 16.14" maximum turning diameter, 24.02” maximum turning length, travels: X-10.43", Z-26.77", speeds to 3,500 RPM main spindle, speeds to 5000 RPM milling spindle, SAMCHULLY MH-210 10” hydraulic 3-jaw chuck, 12-station turret, hydraulic programmable tailstock, tool checker arm, 25 HP, coolant, chip conveyor, 220V/3PH/50-60HZ, s/n ML0259-000067
  • DOOSAN (2015) LYNX 220LMC CNC turning and live milling center with DOOSAN-FANUC I SERIES CNC control, 20.08" swing over bed, 11.42” swing over saddle, 19.41" maximum turning diameter, 20.50” maximum turning length, travels: X-6.89", Z-21.65", speeds to 4,500 RPM main spindle, speeds to 5,000 RPM milling spindle, SAMCHULLY MH-210 10” hydraulic 3-jaw chuck, 24-station turret, hydraulic programmable tailstock, tool checker arm, parts catcher, 15 HP, coolant, chip conveyor, 220V/3PH/50-60HZ, s/n ML0230-000187
  • ATS (2015) EC-565L automatic bar feeder with digital and pendant controls, 5-65 MM bar diameter size, 60” maximum bar length, 85 PSI air supply, 220V/1PH/50-60HZ, s/n 16150978

CNC TURNING CENTER

  • DOOSAN (2015) LYNX 220LC CNC turning center with DOOSAN-FANUC I SERIES CNC control, 20.08" swing over bed, 11.42” swing over saddle, 12.6" maximum turning diameter, 21.69” maximum turning length, travels: X-6.89", Z-21.65", speeds to 4,000 RPM, SAMCHULLY MH-208V1 hydraulic 3-jaw chuck, 12-station turret, hydraulic programmable tailstock, tool checker arm, parts catcher, 15 HP, coolant, LNS 57508021 chip conveyor, 220V/3PH/50-60HZ, s/n ML0022-006362

CONVENTIONAL MACHINE TOOLS

  • HARTFORD 2 V vertical milling machine with 9” X 42” table, speeds to 3,000 RPM, 2 HP motor, 575V/3PH/60HZ, s/n 840110
  • COSEN (2012) C-260NC automatic horizontal metal cutting bandsaw with HITECH touchscreen PLC control, 10” x 12” capacity, hydraulic shuttle vise, 5 HP drive motor, s/n C1010123
  • STARTRITE 316 H vertical metal cutting bandsaw with 36” throat, 16” max workpiece height, speeds to 1580 RPM, t-slot table, IDEAL STARTRITE BSO.25 blade welder & grinder, 575V/3PH/60HZ, s/n 103100

FACTORY SUPPORT EQUIPMENT

  • CHICAGO PNEUMATIC (2015) QRS25HP 25 HP air compressor with 132 PSI service/maximum pressure, 575V/3PH/60HZ, s/n CAI840570
  • CHICAGO PNEUMATIC (2015) CPX 100(A6)UL refrigerated air dryer with 13 BAR working/maximum pressure, 115V/1PH/60HZ, s/n CAI866030

ALSO:

  • Large selection of machine tool accessories including live milling and turning tools; (100+) CAT40, CAT50 & BT40 tool holders; machine vises; rotary indexing heads; angle plates; die-lifting carts; pedestal-type grinders; perishable tools including end mills, drills, reamers, taps and cutters; carbide insert cutters and selection of carbide inserts; hand tools; shop supplies; workbenches and more!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com