Surplus to the Ongoing Needs of

Fluidix Inc.

Machining & Fabricating Equipment Sale

 

Date

Tuesday, August 22, 2017

Start Time

1:00 PM EDT

Inspection

Tuesday, August 22 from 9:00 A.M. to start of auction.

Removal

Small items: Wednesday, August 23 by 5:00 P.M.
Remaining items: Tuesday, August 29 by 5:00 P.M.

Industry

Fabricating
 


 

https://www.bidspotter.com/en-us/auction-catalogues/corporateassets/catalogue-id-corpor10190

FEATURING: APOLLO P600 60 ton hydraulic bender; COLCHESTER MASCOT 1600 18"x42" engine lathe; SHEYANG CA62408 18"x61" engine lathe; DEAN SMITH GRACE 20SB 20"x50" engine lathe; CINCINNATI 3P universal milling machine; MILWAUKEE MODEL H horizontal milling machine; CINCINNATI BICKFORD 5’ radial arm drill; CHROMALUX P-350 soft metal melting pot; UNGEARED MODEL 40 OBI punch press; ORIGO 20-P H-frame hydraulic shop; OSTER 655 pipe threader; W.A. WHITNEY 606-250 hydraulic shear; W.A. WHITNEY 608-049 hydraulic punch/bender; MFG. UNKNOWN automatic band saw; TECHQUIP 3 HP compressor; HOBART MEGA-MIG 650 MIG welder; HOBART MEGA-MIG 650-RVS MIG welder; MILLER GOLDSTAR 400SS arc welder; MILLER CP-200 DC arc welding power source; KINNEY KDH 150 7.5 HP vacuum pumps; STENSFORS MODEL 3438-24 scissor lift table system; 96”x60” acorn table; 144”x72” acorn table; (6) MENK galvanized radiator units; (50+) FRANKLIN ELECTRIC MODEL 150-3007-401 electric motors with 1.5 HP (New In Box); (50+) FRANKLIN ELECTIRC MODEL 435-3007-402 electric motors with 1.5 HP (New In Box); WIDE ASSORTMENT of perishable tooling including drills, end mills, taps, dies, carbide cutting tools and inserts; welding supplies; work benches; a large quantity of inspection equipment consisting of verniers, outside & inside micrometers, dial bore gauges, block gauge sets, a STARRETT 62” VERNIER and STARRETT granite surface plates; galvanized structural hardware; electrical disconnect, quick connect and shut off boxes; a substantial amount of machine accessories made up of rotary tables, indexing heads, machine vises, tie-down clamping and MUCH MORE!

BENDING MACHINE

  • APOLLO P600 hydraulic bending machine with 60 ton capacity, approx. 12” stroke, s/n: BQ3928115

GAP BED ENGINE LATHES

  • COLCHESTER MASCOT 1600 gap bed engine lathe with 18” swing, 42” between centers, 1” spindle bore, speeds to 1600 RPM, inch/metric threading, 12” chuck, s/n: 7/0002/11036
  • SHEYANG CA62408 gap bed engine lathe with 18” swing, 61” between centers, approx. 1.5” spindle bore, speeds to 1680 RPM, inch/metric threading, 10” chuck, steadies, s/n: BB2576
  • DEAN SMITH GRACE 20SB gap bed engine lathe with 20” swing, approx. 50” between centers, 3” spindle bore, speeds to 900 RPM, inch/metric threading, 15” chuck, s/n: 30225

MILLING MACHINES

  • CINCINNATI 3P universal milling machine with 68”x15” table, speeds to 1600 RPM, s/n: 4A3P5JE-6
  • MILWAUKEE MODEL H horizontal milling machine with 64”x13.5” table, speeds to 1000 RPM, s/n: 58-4065 (War Finish – W.P.B. Order No. L-108)

RADIAL ARM DRILL

  • CINCINNATI BICKFORD 5’ radial arm drill with 56” column, speeds to 700 RPM, 48”x30”x22” box table, s/n: 3E-675

MISCELLANEOUS MACHINERY

  • CHROMALUX P-350 soft metal melting pot, with 5 kW, 900 deg. max. temperature, s/n: n/a
  • UNGEARED  MODEL 40 OBI power press with 40 ton capacity, 100 strokes/min, stroke adjustable from 5/16” to 3 7/8”, 8 5/8” throat, s/n: 4480
  • ORIGO 20-P H-frame hydraulic shop press with 20 ton capacity, weld test fixture, s/n: n/a
  • OSTER 655 portable pipe threader with 2” capacity, s/n: W51270
  • W.A. WHITNEY 606-250 hydraulic cutter with 18 ton capacity, s/n: 606-250-29962
  • W.A. WHITNEY 608-049 hydraulic punch/bender with 10 ton capacity, s/n: 608-048-29963
  • MFG. UNKNOWN automatic horizontal band saw with 9”x9” capacity, s/n: n/a
  • TECHQUIP 3 HP shop compressor, s/n: n/a

WELDERS

  • HOBART MEGA-MIG 650 MIG welder with HOBART DUALMATIC CVS/HOBART 27 dual wire feeder, cables and gun, s/n: 7-8WS28834
  • HOBART MEGA-MIG 650-RVS MIG welder with HOBART 2400 wire feeder, cables and gun, s/n: 87WS10086
  • MILLER GOLDSTAR 400SS arc welder with cables and gun, s/n: n/a
  • MILLER CP-200 DC arc welding power source

SHOP EQUIPMENT

  • (6) MENK galvanized radiator units approx. 11’6”x61” with 32 fins
  • (Approx. 50) FRANKLIN ELECTRIC MODEL 150-3007-401 electric motors with 1.5 HP (New In Box)
  • (Approx. 50) FRANKLIN ELECTIRC MODEL 435-3007-402 electric motors with 1.5 HP (New In Box)

INVENTORY

  • (6) MENK galvanized radiator units approx. 11’6”x61” with 32 fins
  • (Approx. 50) FRANKLIN ELECTRIC MODEL 150-3007-401 electric motors with 1.5 HP (New In Box)
  • (Approx. 50) FRANKLIN ELECTIRC MODEL 435-3007-402 electric motors with 1.5 HP (New In Box)

ALSO:

A WIDE ASSORTMENT of perishable tooling including drills, end mills, taps, dies, carbide cutting tools and inserts; welding supplies; work benches; a large quantity of inspection equipment consisting of verniers, outside & inside micrometers, dial bore gauges, block gauge sets, a STARRETT 62” VERNIER and STARRETT granite surface plates; galvanized structural hardware; electrical disconnect, quick connect and shut off boxes; a substantial amount of machine accessories made up of rotary tables, indexing heads, machine vises, tie-down clamping and MUCH MORE!

ONSITE & ONLINE


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 16% for all onsite bidders and 18% for all Webcast (Remote) bidders will apply at this sale.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 
*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. Contact info@corpassets.com for details. The Buyer's Premium does not apply to posted rigging fees.