Surplus Assets of

Alta Precision Inc.

Surplus Assets of an Aerospace Manufacturing Facility

 

Date

Thursday, March 4, 2021

Start Time

10:30 AM EST

Inspection

BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange a date and time.

Removal

All assets must be removed no later than Friday, March 26 BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange.

Industry

Machining
 

Surplus Assets of Alta Precision Inc.
 

Unique Offering of Exceptionally Well-Maintained High Precision Aerospace CNC Machines Featuring: UNISIG B700 CNC aerospace deep boring gun drill; SNK RB4NM double column 5 axis bridge type CNC machining center; (2)SNK (Installed new 2006) RB-3NM-APC double column 5 axis bridge type CNC machining centers with very low hours and like new condition; MORI SEIKI MH630 5 axis CNC horizontal machining center; OKK MCH-800 4 axis CNC horizontal machining center; MAKINO MC1510 5 axis CNC horizontal machining center; NIIGATA HN80C 4 axis CNC horizontal machining center; BOHERINGER 300” deep boring gun drill; VDF 1250 large capacity flatbed lathe and MORE!

CNC DEEP HOLE GUN DRILL

  • UNISIG (2016) B700-4M CNC drop bed deep hole drilling machine with FANUC Oi-TD CNC control, 63” swing over bed, 157.5” max. workpiece length, 90 HP workpiece headstock, 126 HP drilling headstock , 7.9” drilling diameter (max. from solid), 12” max counterbore diameter, 11.8” max. tool diameter, 126 HP drilling headstock, 13,500 LBS max. drilling feed force; 197 IPM drilling headstock max. feed/traverse, drilling speeds to 900 RPM, workpiece headstock speeds to 280 RPM; 4.5T max. workpiece weight between centers, 6.8 max. workpiece weight between centers (1 steady), BTA drilling and counterboring capability, KOOLANT COOLERS coolant refrigeration system, 3,400 LPM Capacity, coolant, high pressure coolant filtration, 15 Bar 218 PSI max. coolant pressure, 30 HP pressure pump, very low usage with ONLY 1134 HRS (recorded on meter at time of listing), 480-227V/3PH/60HZ, s/n: 1917

CNC DOUBLE COLUMN VERTICAL MACHINING CENTERS

  • SNK (2005) RB-3NM-APC 5-Face double column CNC vertical machining center with FANUC 18i-MB CNC control, (2) 59” x 157.5” drilled & tapped tables, travels: X – 167.32”; Y – 94.48”; Z – 23.62”; W – 43.3”; 94.48” between columns, 59” max. distance spindle nose to table top, 15,400 lb. max. table load, CAT 50 taper, spindle speeds 40-4500 RPM, 40/50 HP spindle motor, 80 station ATC, coolant, dual chip conveyors, right angle head with 1 Deg indexing, running time 3707 hrs (recorded on meter at time of listing), s/n: A5K2761 (tooling not included) (LOCATED IN WATERLOO, ON)

  • SNK (2005) RB-3NM-APC double column CNC vertical machining center with FANUC 18i-MB CNC control, (2) 59” x 157.5” drilled & tapped tables, travels: X – 167.32”; Y – 94.48”; Z – 23.62”; W – 43.3”; 94.48” between columns, 59” max. distance spindle nose to table top, 15,400 lb. max. table load, CAT 50 taper, spindle speeds 40-4500 RPM, 40/50 HP spindle motor, 80 station ATC, coolant, dual chip conveyors, s/n: A5K2760 (tooling not included) (LOCATED IN WATERLOO, ON)

  • SNK RB-4NM double column CNC vertical machining center with FANUC 18-M CNC control, 236” x 78” table, travels: X – 246”; Y – 114”; Z – 23”; W – 55” (cross rail); B – 360,000, 114” distance between columns, 70” max. distance spindle nose to table top, 33,000 lb. max. table load, CAT 50 taper, spindle speeds to 6000 RPM, 24 HP spindle motor, 60 station ATC, coolant, chip conveyor, TSUDAKOMA rotary table with tailstock, 220V/3PH/60HZ, s/n: K1902 (tooling not included)

CNC HORIZONTAL MACHINING CENTERS

  • MORI SEIKI MH-630 5-axis CNC twin pallet horizontal machining center with MORI SEIKI MSC-502 CNC control, (2) 24” x 24” drilled & tapped pallets, travels: X – 39”; Y – 33”; Z – 36”; A – 360,000; B – 360,000, 43” max. distance spindle nose to table top, 3300 lb. max. pallet load, CAT 50 taper, spindle speeds to 13,000 RPM, 25 HP spindle motor, 60 station ATC, coolant through spindle, high pressure coolant, coolant filtration, chip conveyor, touch tool probe, 220V/3PH/60HZ, s/n: 963 (tooling not included)
  • NIIGATA HN80C 4-axis CNC twin pallet horizontal machining center with FANUC 15-M CNC Control, (2) 31” x 31” pallets, travels: X – 60”; Y – 48”; Z – 36”; B – 360,000, 48” max. distance spindle nose to tabletop, 4400 lb. max. pallet load, CAT 50 taper, speeds to 4500 RPM, 60 station ATC, coolant through spindle, high pressure coolant, chip conveyor, 220V/3PH/60HZ, S/N: 46250117, s/n: 46250117 (tooling not included)
  • MAKINO MC-1510-A60 5 axis CNC horizontal machining center with FANUC SERIES 15-M CNC control, 40” x 90” table, travels: X – 59”; Y – 39”; Z – 51”; A – 360,000; B – 360,000, 55” max. distance spindle nose to table top, 6600 lbs. max. pallet load, CAT 50 taper, spindle speeds to 4000 RPM, 24 HP spindle motor, 60 station ATC, coolant through spindle, chip conveyor, RENISHAW OMI-2 optical machine interface, TSUDAKOMA rotary table with tailstock, s/n: A91-222 (tooling not included)
  • OKK MCH—800 4-Axis CNC horizontal machining center, FANUC 18-M CNC control, 86” x 31” dia combination table with 360,000 positions, travels: X – 78”; Y – 40”; Z – 32”; A – 360,000, 5th axis ready, 44” max. distance spindle nose to tabletop, 6600 lb. max. table load, CAT 50 taper, spindle speeds to 3000 RPM, 20 HP spindle motor, 50 station ATC, coolant, 220V/3PH/60HZ, S/N: 180 (tooling not included)

CNC MODULAR GAP LATHE

  • VDF POWER TURN PTI-1-12500 II CNC modular gap lathe with FANUC SERIES O-M CNC control, 49” swing over bed, 149” max. swing over gap, 195” max. distance between centers, 5” spindle bore, speeds to 710 RPM, 53 HP, 8 station tool turret, power headstock positioning, 11 ton max. allowable workpiece weight (with steadies), cross slide, chip conveyor, steady rests, complement of spares and accessories with 3 jaw and 4 jaw chucks, 380V/3PH/50HZ, S/N: D4453

AUCTION CONDUCTED BY CORPORATE ASSETS INC. PROUDLY IN CONJUNCTION WITH:

Proudly in Conjunction with Prestige Auctions
Prestige Auctions

LIVE WEBCAST ONLY


UNISIG B700-4M CNC deep hole gun drill UNISIG 157.5” max workpiece length UNISIG CNC controlled workpiece headstock UNISIG CNC controlled drilling headstock & steady rest View of FANUC SERIES Oi-TD CNC control SNK RB-3NM-APC SNK RB-4NM MORI SEIKI MH-630 NIIGATA HN80C MAKINO MC-1510-A60 OKK MCH-800 4 VDF POWER TURN PTI-1-12500 II

Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com