Surplus Assets of

AGS Automotive

Press Room Equipment, Rolling Stock & Production Support Assets

 

Date

Wednesday, December 1, 2021

Start Time

10:30 AM EST

Inspection

BY APPOINTMENT ONLY. *Special COVID protocols apply. Please email info@corpassets.com to arrange a date and time.

Removal

All assets must be removed no later than Wednesday, December 22 by appointment only. *Special COVID protocols apply. Please email info@corpassets.com for information.

Industry

Stamping | Plastics
 

FEATURING: DANLY S4-300-180-96 straight side double crank stamping press; DANLY S4-300-120-72 straight side double crank stamping press; USI CLEARING S4-300-120-72 straight side double crank stamping press; VERSON SS2-150-46-36 straight side stamping press; COLT CHDR-2000-60 20,000 lb. cap. motorized uncoiler; DALLAS INDUSTRIES 20,000 lb. cap. motorized uncoiler; COLT CHDR-1000-30 10,000 lb. cap. motorized uncoiler; COLT PSCH-1000-36 10,000 lb. cap. uncoiler/straightener; DALLAS INDUSTRIES D325 0.050x24x50 cap. feeder/straightener; AIR FEEDS AF3 24x24 cap. feeder/straightener; SELLICK MODEL 8000 outdoor diesel forklift with 8000 lb. cap.; CONDOR 2548 24V electric scissor lift with 1000 lb. cap. & 19.5’ max. lift height; GROVE SM3146E 24V electric scissor lift with 650 lb. cap. & 25’ max. lift height; GROVE SM2633E 24V electric scissor lift with 500 lb. cap. & 20’ max. lift height; CROWN PW3000 SERIES 24V 6000 lb. cap. electric pallet jack; CATERPILLAR NPP40 24V 4000 lb. cap. electric pallet jack; TENNANT 8410 ride-on LPG sweeper/scrubber; (2) ECONO-LIFT TRS20 2000 lb. cap. straddle tilters; BLANCHARD NO. 18 surface grinder with 36” dia. magnetic chuck; FERDIMAT TS63 hydraulic surface grinder with 18”x8” magnetic chuck; LILIAN 3VH vertical milling machine with speeds to 4200 RPM; E-R MAIER KM1012 roll-in vertical band saw; COMPAIR L11 15 HP fixed speed rotary screw air compressor; ULTRA-AIR (2007) UA201-1000EX refrigerated compressed air dryer; AIRTEK TW-1000 twin tower heatless desiccant dryer; MILLER DELTAWELD 451 MIG welder with MILLER MILLERMATIC S-45D digital wire feeder; L-TEC PCM-VPiII portable plasma cutter; HUGE SELECTION of ELECTRIC MOTORS, SPARE PARTS & MROs including hydraulic power packs, motor/speed controllers, variable frequency drives, electrical cable & wire; MOTOMAN robotic welding power sources; GRACO paint pumps; packaging equipment and MUCH MORE!

STRAIGHT SIDE STAMPING PRESSES

  • DANLY S4-300-180-96 straight side double crank stamping press with 300 ton capacity, 16” stroke, 40” shut height, 8” slide adjustment, 156”x84” bed, approx. 188”x100” ram, 8-12 strokes/min, SPECTRUM WINTRISS digital clutch/brake control, TRIAD safety light curtains, s/n: 960154301
  • DANLY S4-300-120-72 straight side double crank stamping press with 300 ton capacity, 30” stroke, 60” shut height, 12” slide adjustment, 120”x72” bed, 120”x72” ram, 20 strokes/min, SPECTRUM WINTRISS digital clutch/brake control, s/n: 60153504
  • USI CLEARING S4-300-120-72 straight side double crank stamping press with 300 ton capacity, 36” stroke, 52” shut height, 10” slide adjustment, 120”x72” bed, 114”x72” ram, 20 strokes/min, TRIAD safety light curtains, s/n: 10-2026
  • VERSON SS2-150-46-36 straight side stamping press with 150 ton capacity, 10” stroke, 30” shut height, 6” slide adjustment, 48”x36” bed, 50”x37” ram, 30-60 strokes/min, SPECTRUM WINTRISS digital clutch/brake control, TRIAD safety light curtains, s/n: 24632

PRESS ROOM EQUIPMENT

  • SESCO 55-528 mandrel-type motorized uncoiler with 40,000 lb. capacity, 5”-36” stock width, 18-36 output rate, s/n: 19473
  • COLT CHDR-2000-60 mandrel-type motorized uncoiler with 20,000 lb. capacity, 60” max. width, 3 HP, s/n: 1201415
  • DALLAS INDUSTRIES mandrel-type motorized uncoiler with 20,000 lb. capacity, 30” max. width, 72” max. stroke, s/n: 16892
  • COLT CHDR-1000-30 mandrel-type motorized uncoiler with 10,000 lb. capacity, 30” max. width, 60” max. stroke, 2 HP, s/n: 1201430
  • COLT PSCH-1000-36 combination coil cradle/straightener with 24” rolls, 10,000 lb. capacity, 60” stroke, s/n: 1281062
  • LITTELL mandrel-type motorized uncoiler with approx. 30” max. width, s/n: n/a
  • DALLAS INDUSTRIES D325 feeder/straightener with 0.050x24x50 capacity, (2) adjustable height rolls, s/n: 14571
  • AIR FEEDS AF3 feeder/straightener with 24x24 capacity, (2) rolls, s/n: 880742

CONVENTIONAL MACHINE TOOLS

  • BLANCHARD NO. 18 surface grinder with 36” dia. magnetic chuck, 40” swing, 12” max. height under wheel, speeds to 720 RPM, 40 HP, 18” max. wheel size, s/n: 4017
  • FERDIMAT TS63 hydraulic surface grinder with 18”x8” magnetic chuck, speeds to 1800 RPM, incremental down feed, coolant, s/n: 88071612
  • KENT SGS-1020AH hydraulic surface grinder with 18”x8” magnetic chuck, 8” dia. max. wheel size, coolant, s/n: 73-007
  • LILIAN 3VH vertical milling machine with 50”x10” table, speeds to 4200 RPM, 3 HP, R8 spindle taper, s/n: n/a
  • E-R MAIER KM1012 roll-in vertical band saw with 30”x18” table, 15” throat, 14” max. workpiece height, 10’2”x3/4” max. blade size, s/n: 98999
  • (6) FORD-SMITH double end polishers with 10” max. wheels
  • SUNNEN MB-1290-C precision honing machine, s/n: 7580
  • KBC 20-VS floor-type drill press with 19”x21” table, speeds to 1800 RPM, 1.5 HP, s/n: 606027

MATERIAL HANDLING & ROLLING STOCK

  • SELLICK MODEL 8000 outdoor diesel forklift with 8000 lb. capacity, 180” max. lift height, 3 stage mast, side shift, multi-surface tires, 1256 hrs (recorded on meter at time of listing), s/n: 5A3058
  • CROWN PW3000 SERIES 24V electric  walk-behind pallet jack with 6000 lb. capacity, s/n: 6A181247
  • CATERPILLAR NPP40 24V electric walk-behind pallet jack with 4000 lb. capacity, s/n: 2CI-03874
  • (2) ECONO-LIFT TRS20 straddle tilters with 2000 lb. capacity, s/n: 80663, 80664
  • CONDOR 2548 24V electric scissor lift with 1000 lb. capacity, 19.5’ max. lift height, on-board charger, s/n: X84596002
  • GROVE SM3146E 24V electric scissor lift with 650 lb. capacity, 25’ max. lift height, on-board charger, 454 hrs (recorded on meter at time of listing), s/n: 43247
  • GROVE SM2633E 24V electric scissor lift with 500 lb. capacity, 20’ max. lift height, on-board charger, s/n: 19123
  • TENNANT 8410 ride-on LPG sweeper/scrubber with 45” main sweeping brush, (3) 16” dia. scrubbing brushes, s/n: 8410-14026
  • FACTORY CAT MODEL 35 24V electric walk-behind floor scrubber, s/n: 35-5201

FACTORY SUPPORT EQUIPMENT

  • COMPAIR (2003) L11 fixed speed rotary screw air compressor with 15 HP, s/n: 14052804529902901
  • GREAT LAKES AIR (2008) GRF-1000A-536 refrigerated air dryer, s/n: 33223
  • ULTRA-AIR (2007) UA201-1000EX refrigerated compressed air dryer, s/n: U-48799
  • COMPAIR MDX air dryer, s/n: n/a
  • AIRTEK TW-1000 twin tower heatless desiccant dryer with 100 deg. F. max. inlet temperature, 1000 SCFM, s/n: 981-8138
  • BERG WCS70-2X water chiller with JOHNSON digital control, (2) COPELAMETIC GDPI-3500-TSE air-cooled condenser units, s/n: W3269-0490-CIN001A
  • SKAT-BLAST twin station dry blast sand blast cabinet, s/n: n/a
  • (3) PRESTOLITE POWER ULTRA-MAXX multi-voltage battery chargers with 480/575V, 3 PH, 60 HZ
  • MFG. UNKNOWN 36”x252” portable powered belt conveyor with variable speed control, s/n: n/a
  • SADLER 11.5”x59” powered belt conveyor, s/n: n/a
  • MOTION MFG. EDS-710/0010/4 28” dia. motorized rotary table, s/n: 28467

WELDING EQUIPMENT

  • MILLER DELTAWELD 451 MIG welder with MILLER MILLERMATIC S-45D digital wire feeder, cables and gun, s/n: n/a
  • L-TEC PCM-VPiII portable plasma cutter with cables and gun, s/n: A93A-44053
  • LINCOLN ELECTRIC POWERWAVE 450 digital welding power source, s/n: U1990912716
  • LINCOLN ELECTRIC INVERTEC POWER WAVE digital welding power source, s/n: n/a
  • (5) MOTOMAN MOTOARC 350i digital robotic welding power sources
  • (2) MOTOMAN MOTOARC 450 digital robotic welding power sources
  • DIVERSI-TECH FRED 1HP snorkel-type portable welding fume extractor, s/n: 2924
  • SOURCER ELECTRO-AIR portable welding fume extractor, s/n: n/a

PACKAGING EQUIPMENT & SUPPLIES

  • STRAPEX SA-2000 semi-automatic strapping machine, s/n: 99103021
  • MFG. UNKNOWN semi-automatic strapping machine, s/n: n/a
  • (2) STRAPACK RQ-8Y side seal automatic strapping machines, s/n: 20859402, n/a
  • Approx. 80 large gaylord shipping boxes

ALSO:

  • HUGE SELECTION of ELECTRIC MOTORS, SPARES & MROs including hydraulic power packs, motor/speed controllers, variable frequency drives, heat exchangers, electrical cable & wire; POWERTRAN 440 KVA drive isolation transformer; (2) CLYDE-MATIC feeders; GRACO pneumatic paint pumps with sprayers and MUCH MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS

MODALITÉS ET CONDITIONS DE VENTE


Payment

 

-WEBCAST (REMOTE) BIDDERS

Pre-Approval by Corporate Assets Inc. will be required. To participate in the auction you must register and be approved. All Webcast (Remote) Bidders require a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see below for applicable Buyer's Premium) and must be by Direct Bank Wire Transfer. To ensure approval as a Bidder please make deposit arrangements as far in advance of the sale as possible. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

 

-GENERAL

All buyers must complete the "Buyer Deposit Form" and provide Corporate Assets Inc. with a 25% deposit of their total intended purchase amount by way of wire transfer.* The deposit must be received by no later than 1 business day prior to the commencement of the sale.**

Payment in full must be made before or immediately after the conclusion of the auction.

* Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.

** In order to meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

For International (Non Canadian and Non U.S. Residents) Buyers, Webcast Remote Buyers & Online Buyers, all payments shall ONLY be by way of wire transfer.

For Canadian and U.S. On-site Buyers, all payments shall be by way of wire transfer, certified cheque, bank draft, Interac, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

Payment by way of Visa or Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.00.

Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.

Download Full Payment Information
Download Buyer Deposit Form

CAD Wire Transfer Details
USD Wire Transfer Details
GBP Wire Transfer Details
EUR Wire Transfer Details


Proxy Bidding

To place a proxy bid, please refer to the Corporate Asset Inc. PROXY BID FORM or email us at: info@corpassets.com for more information.

All Proxy Bids must be completed in writing, either typed or hand-written, indicate the name of
the auction sale, and must be signed and dated. They must be faxed or mailed to our office and
received by no later than 3:00 P.M. EST on the day before the auction.

Download Proxy Bid Form