SURPLUS ASSETS OF

Technicut Tool Inc.

EDMs, CNC Vertical Machining & Horizontal Turning Centers

 

Date

Wednesday, April 26, 2023

Start Time

10:30 AM EDT

Inspection

Tuesday, April 25 from 9 AM to 5 PM or by appointment. Please email info@corpassets.com to arrange.

Removal

All assets must be removed no later than Friday, May 12 by appointment only. Rigging details to follow.

Location

Multiple Locations in Ontario

Industry

Machining
 


Add to Calendar
 

FEATURING: AWEA (2018) VP-2012 high speed CNC bridge type vertical machining center; LMT (2019) VMC1100 CNC vertical machining center; MATSUURA MC-1000VG high speed CNC vertical machining center; MAKINO (2005) S56 high speed CNC vertical machining center; MIKRON (2001) VCP600.HS high speed CNC vertical machining center; JOHNFORD (2007) SV-33 high speed CNC vertical machining center; MILLTRONICS RH 20 SERIES E CNC vertical machining center; JOHNFORD (2005) VMC-1600 5-axis CNC vertical machining center; MATSUURA RA-3F high speed CNC twin-pallet vertical machining center; MATSUURA (2008) H.PLUS-405 high speed CNC twin-pallet horizontal machining center; MORI SEIKI SL-25MC CNC turning and live milling center; ROMI (2009) M.27 flatbed CNC lathe; NAKAMURA-TOME SC-150 CNC turning center; (3) CHARMILLES TECHNOLOGIES ROBOFORM 40 CNC ram-type EDMs; CHARMILLES TECHNOLOGIES (2000) ROBOFORM 35 CNC ram-type EDM; ONA (2002) HS 600 CNC ram-type EDM; ONA PRIMA S-900 CNC wire EDM; CHARMILLES TECHNOLOGIES ROBOFIL 6020SI CNC wire-type EDM; CHARMILLES TECHNOLOGIES ROBOFIL 300 CNC wire-type EDM; MAKINO (2005) SP43 wire-type EDM; PERFECT (2019) SG-60120AHD CNC surface grinder; (3) LMT (2018) 5H vertical turret mills; (5) MECCA (2003) SP-400VS CNC vertical milling machines; PERFECT PFG-2550M automatic surface grinder; SUBURBAN TOOL MASTER VIEW MV14P optical comparator; (2) RUIPUHUA (2020) RPH-V11 flat face mask making lines; LARGE SELECTION OF: GERARDI clamping fixture plates; SCHUNK VERO-S NSE PLUS 138 quick change pallets; FCS clamping fixtures; CAT 40, BT 40, HSK 63 & HSK 40 TAPER TOOL HOLDERS; turning center tool holders; chuck jaws; turning center tool holders; (5) 200X300 6” machine vises (brand new); (5) 200X200 6” machine vises (brand new); (5) WD TEHNIK 10-drawer shop cabinets (brand new); (5) WD TEHNIK 5-drawer rolling shop cabinets with HSK 50 tool storage (brand new); (5) WD TEHNIK 5-drawer rolling shop cabinets with HSK 63 tool storage (brand new); and MUCH MORE!

ADDRESS DETAILS
Lots 1-45: 2045 HALFORD DR, WINDSOR, ON N9A 6J3
Lots 46-100: 92 ROY BLVD, BRANTFORD, ON N3R 7K2
Lots 100-151: 2285 AMBASSADOR DR, WINDSOR, ON N9C 3R5
Lots 152-159: 11555 COUNTY ROAD 42 SUITE B, WINDSOR, ON N8N 2M1

HIGH SPEED CNC BRIDGE TYPE VERTICAL MACHINING CENTER

  • AWEA (2018) VP-2012 high speed CNC bridge type vertical machining center with MITSUBISHI ELECTRIC CNC control, 78.74” x 43.31” table, travels: X-78.74”, Y-47.24”, Z-29.92”, spindle speeds to 15,000 RPM, CAT 40 taper, 40-station ATC, RENISHAW RMP 40 touch probe, RENISHAW laser tool setter, through-spindle coolant, chip auger & conveyor, 600V/3PH/50-60HZ, s/n VB21801 (located at 92 Roy Blvd, Brantford, ON)

CNC VERTICAL MACHINING CENTERS

  • LMT (2019) VMC1100 CNC  vertical machining center with FANUC SERIES Oi-MF CNC control, 43.31” x 23.62” table, travels: X-43.31”, Y-23.62”, Z-43.62”, spindle speeds to 8,000 RPM, CAT 40 taper, 24-station ATC, coolant, chip auger, s/n 19020105 (located at 2045 Halford Dr, Windsor, ON)
  • MATSUURA MC-1000VG high speed CNC vertical machining center with YASNAK CNC control, 45.28” x 20.08” table, travels: X-40.15”, Y-21.64”, Z-20.08”, 25.98” maximum distance spindle nose to tabletop, spindle speeds to 10,000 RPM, CAT 40 taper, 30-station ATC, coolant, TURBO CONVEYOR chip conveyor, s/n 981113379 (located at 92 Roy Blvd, Brantford, ON)
  • MAKINO (2005) S56 high speed CNC vertical machining center with PROFESSIONAL 3 CNC control, 19.75” x 39.25” table, travels: X-35”, Y-17”, Z-17.5”, spindle speeds to 12,000 RPM, CAT 40 taper, 30-station ATC, coolant, tool setter, s/n V8437 (located at 11555 county road 42 Suite B, Windsor, ON)
  • MIKRON (2001) VCP600.HS high speed CNC vertical machining center with MIKRON TNC426/430 CNC control, 33.46” x 20.87” table, travels: X-23.62”, Y-17.72”, Z-17.72”, spindle speeds to 42,000 RPM, HSK 40 taper, 36-station ATC, coolant, chip auger, 400V/3PH/60HZ, s/n 107.30.98.336 (located at 2285 Ambassador Dr, Windsor, ON)
  • JOHNFORD (2007) SV-33 high speed CNC vertical machining center with FANUC SERIES 18i-MB CNC control, 47.2” x 23.6” table, travels: X-33.5”, Y-24”, Z-24”, 24” maximum distance spindle nose to tabletop, spindle speeds to 10,000 RPM, CAT 40 taper, 24-station ATC, 10 HP, coolant, chip auger, 220V/3PH/60HZ, s/n MBA 7055 (located at 2285 Ambassador Dr, Windsor, ON)
  • MILLTRONICS RH 20 SERIES E CNC vertical machining center with MILLTRONICS CENTURION 6 CNC control, 47” x 16” table, BT 40 taper, coolant, HABOR chiller, 220V/3PH/50-60HZ, s/n 6332 (located at 2285 Ambassador Dr, Windsor, ON)

5-AXIS CNC VERTICAL MACHINING CENTER

  • JOHNFORD (2005) VMC-1600 5-axis CNC vertical machining center with FANUC SERIES 18i-MB CNC control, 70.9” x 29.5” table, travels: X-63”, Y-33.5”, Z-31.5”, TSUDAKOMA TN-320 4TH AND 5TH AXIS, 37.4” maximum distance spindle nose to tabletop, spindle speeds to 8,000 RPM, CAT 40 taper, 24-station ATC, coolant, chip auger, s/n VCB5154 (located at 2285 Ambassador Dr, Windsor, ON)

CNC TWIN-PALLET VERTICAL MACHINING CENTER

  • MATSUURA RA-3F high speed CNC twin-pallet vertical machining center with YASNAK CNC control, (2) 17” x 31.75” pallets, spindle speeds to 15,000 RPM, BT 40 taper, 40-station ATC, coolant, chip conveyor, s/n 950311266 (located at 2285 Ambassador Dr, Windsor, ON)

CNC TWIN-PALLET HORIZONTAL MACHINING CENTER

  • MATSUURA (2008) H.PLUS-405 high speed CNC twin-pallet horizontal machining center with MATSUURA G-TECH 30i CNC control, (2) 19.68” x 19.68” pallets, travels: X-23.62”, Y-23.62”, Z-23.62”, spindle speeds to 12,000 RPM, CAT 40 taper, 40-station ATC, tool setter, coolant, TURBO CONVEYOR chip conveyor, 220V/3PH/50-60HZ, s/n 17823 (located at 2285 Ambassador Dr, Windsor, ON)

CNC TURNING AND LIVE MILLING CENTER

  • MORI SEIKI SL-25MC CNC turning and live milling center with MORI SEIKI MSC-516 CNC control, KITAGAWA 10” 3-jaw chuck, 12” swing, travels: Z-40”, (6) live tool stations, 12-station turret, speeds to 4,800 RPM, 15 HP spindle motor, coolant, hydraulic tailstock, TURBO CONVEYOR chip conveyor, 220V/3PH/60HZ, s/n 1370 (located at 2285 Ambassador Dr, Windsor, ON)

CNC LATHE

  • ROMI (2009) M.27 flatbed CNC lathe with GE FANUC SERIES 21i-TB CNC control, 20” 3-jaw chuck, 27” swing over bed, 120” distance between centers, travels: X-14.2”, Z-120”, 4.1” spindle bore, 8-station turret, speeds to 1,800 RPM, 30 HP spindle motor, coolant, KABEL SCHLEPP chip conveyor, tailstock, 480V/3PH/50-60HZ, s/n 016.008886.405 (located at 2285 Ambassador Dr, Windsor, ON)

CNC TURNING CENTER

  • NAKAMURA-TOME SC-150 CNC turning center with FANUC SERIES 18i-T CNC control, KITAGAWA 6” 3-jaw chuck, 25.98” swing over bed, 8.66” maximum turning diameter, 12.01” maximum turning length, travels: X-5.12”, Z-12.59”, 2.44” spindle bore, 12-station turret, main spindle speeds to 5,000 RPM, sub spindle speeds to 5,000 RPM, coolant, s/n S150208 (located at 92 Roy Blvd, Brantford, ON)

CNC RAM-TYPE EDMS

  • (3) CHARMILLES TECHNOLOGIES ROBOFORM 40 CNC ram-type EDMS with ROBOFORM CNC control, 27.56” x 19.69” table, travels: X-19.69”, Y-15.75”, Z-17.72”, C-360 DEG, 16.54” x 40.94” x 28.35” work tank dimensions, 2,200 LBS maximum workpiece weight, s/n 600120; 605118; 600150 (located at 2285 Ambassador Dr, Windsor, ON)
  • CHARMILLES TECHNOLOGIES (2000) ROBOFORM 35 CNC ram-type EDM with ROBOFORM CNC control, 19.69” x 15.75” table, travels: X-13.78”, Y-9.84”, Z-11.81”, 14.57” x 31.5” x 21.65” work tank dimensions, 1,100 LBS maximum workpiece weight, 380V/3PH/60HZ, s/n 0-55677640394 (located at 2285 Ambassador Dr, Windsor, ON)
  • ONA (2002) HS 600 CNC ram-type EDM with 31.5” x 47.25” table, s/n 10362 (not in service) (located at 11555 county road 42 Suite B, Windsor, ON)

CNC WIRE-TYPE EDMS

  • ONA PRIMA S-900 CNC wire EDM with travels: X-35.43”, Y-15.75”, Z-15.75”, U-3.15”, V-3.15”, 51.18” x 31.5” x 15.75” maximum workpiece dimensions, 2,000 LB maximum workpiece weight, 30 DEG maximum angle, s/n 8265/9807 (located at 2045 Halford Dr, Windsor, ON)
  • CHARMILLES TECHNOLOGIES ROBOFIL 6020SI CNC wire-type EDM with 15.5” x 25” table size, s/n 193574 (located at 2285 Ambassador Dr, Windsor, ON)
  • CHARMILLES TECHNOLOGIES ROBOFIL 300 CNC wire-type EDM with travels: X-17.5”, Y-9.8”, Z-15.7”, U-15.7”, V-9.8”, 33.5” x 19.7” maximum workpiece dimensions, 2,200 LBS maximum workpiece weight, s/n 42550 (located at 2285 Ambassador Dr, Windsor, ON)
  • MAKINO (2005) SP43 wire-type EDM with MAKINO MGW-S CNC control, s/n W 7261 (located at 11555 county road 42 Suite B, Windsor, ON)

CNC SURFACE GRINDER

  • PERFECT (2019) SG-60120AHD CNC surface grinder with 24” x 40” electro-magnetic chuck, SIEMENS SMART LINE touchscreen PLC control, SINO SDS6-2V 2-axis DRO, travels: X-49.21”, Y-23.62”, coolant with paper filtration, 600V/3PH/60HZ, s/n 1904043 (located at 2045 Halford Dr, Windsor, ON)

CONVENTIONAL MACHINERY

  • (3) LMT (2018) 5H vertical turret mills with 54” x 12” table, table stroke: X-31.89”, Y-16.54”, Z-19.69”, speeds to 4,200 RPM, KBS APF-500 power feed, SINO SDS3MS 3-axis DRO, 600V/3PH/60HZ, 5 HP, s/n 1804072; 1804071; 1804070 (located at 2045 Halford Dr, Windsor, ON)
  • (5) MECCA (2003) SP-400VS CNC vertical milling machines with FAGOR CNC controls, 10” x 50” table, speeds to 4,500 RPM, 3 HP, s/n 0300154; 0300156; 0300158; 0300155; 0300157 (located at 2045 Halford Dr, Windsor, ON)
  • PERFECT PFG-2550M automatic surface grinder with 10” x 20” electro-magnetic chuck, 2.2 HP, 600V/3PH/60HZ, s/n 0121060 (located at 2045 Halford Dr, Windsor, ON)
  • SUBURBAN TOOL MASTER VIEW MV14P optical comparator with FAGOR NV 20 DRO, s/n 2871-0402F (located at 11555 county road 42 Suite B, Windsor, ON)

FACE MASK MANUFACTURING LINES

  • (2) RUIPUHUA (2020) RPH-V11 flat face mask making lines consisting of mask body making machine, ear welding machine, transfer belt conveyor, packaging system with 6.89” x 3.74” mask size, 80-100 pieces per minute capacity, s/n N/A (located at 2045 Halford Dr, Windsor, ON)

ALSO:

  • LARGE SELECTION OF: GERARDI clamping fixture plates; SCHUNK VERO-S NSE PLUS 138 quick change pallets; FCS clamping fixtures; CAT 40, BT 40, HSK 63 & HSK 40 TAPER TOOL HOLDERS; turning center tool holders; chuck jaws; turning center tool holders; (5) 200X300 6” machine vises (brand new); (5) 200X200 6” machine vises (brand new); (5) WD TEHNIK 10-drawer shop cabinets (brand new); (5) WD TEHNIK 5-drawer rolling shop cabinets with HSK 50 tool storage (brand new); (5) WD TEHNIK 5-drawer rolling shop cabinets with HSK 63 tool storage (brand new); and MUCH MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.
DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS
MODALITÉS ET CONDITIONS DE VENTE

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN CAD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.
Download Full Payment Information
Download Buyer Deposit Form
CAD Wire Transfer Details
USD Wire Transfer Details
GBP Wire Transfer Details
EUR Wire Transfer Details

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.
 
Please read our Full Terms & Conditions for Removal Requirements

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

Rigger Release Authorization Form

 

Sample of 'Certificate of Insurance' or 'CI'

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com		 Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com