State-of-the-Art Water Bottling Facility

Late Model Offering

 

Date

Wednesday, August 6, 2025

Start Time

10:00 AM MDT

Inspection

Tuesday, August 5 from 9 AM to 4 PM MDT.

Removal

All assets must be removed no later than Friday, August 29 by appointment only. Rigging details to follow.

Location

7115 Girard Road Northwest, Edmonton, Alberta, Canada, T6B 2C5

Industry

Food Processing & Packaging
 


Add to Calendar
 

FEATURING: SHEN ZHEN (2015) 8 -cavity automated 500ml water bottle line consisting of:  SHEN ZHEN (2015) MODEL JND-E8 8 - cavity bottle blow mould machine; HUARE MACHINERY MANUFACTURING CO. (2015) MODEL HC-08AC1 12HP industrial chiller; SHEN ZHEN (2015) MODEL JND32-32-8 32-station washing, filling & capping machine; SHEN ZHEN (2015) JND-500 12 station rotary glue labeling machine; SHEN ZHEN (2015) JND200A tunnel type casing machine with SIEMENS PLC control. SHEN ZHEN (2015) 6-cavity automated 375-ml/500-ml/591-ml/710-ml/1000-ml/1500-ml/ 2000-ml water bottle line consisting of: SHEN ZHEN (2015) JND-E6000 6 - cavity blow moulding machine; SHEN ZHEN (2015) MODEL JND18-18-6 18-station washing, filling & capping machine; SHEN ZHEN (2015) JND-500A 12 station rotary glue labeling machine; SHEN ZHEN (2015) JND200A tunnel type casing machine with SIEMENS PLC control. Water bottling equipment consisting of: SHEN ZHEN 3280t injection moulding machine; SHEN ZHEN (2021) 6000 6 station blow mould machine; SHEN ZHEN XG300 300BPH 6 station bottle washer and filling machine; SHEN ZHEN 5 GAL single station blow moulding machine; SHEN ZHEN JND-90 5gal bottle pre-form heater; HUARE MACHINERY HC-20SAC1 30HP chiller unit. Water filtration equipment including: (3) APPLIED MEMBRANES skid mounted twin filtration / pump units; APPLIED MEMBRANES reverse osmosis filtration unit

Rigging and Removal Details

THE EXCLUSIVE MACHINERY AND EQUIPMENT RIGGER FOR THIS SALE IS:
Stan Canada Industrial Machine Tool Service
Yury Kungurtsev
[email protected]
(780) 465-3667

*All assets must be removed no later than Friday, August 29. For everyone’s safety, removal at this site is conducted strictly by appointment. Appointments must be made via Stan Canada Industrial Machine Tool Service, contact Yury Kungurtsev [email protected] to set their pick-up appointments upon payment in full. Posted prices are valid only on the scheduled removal days. Additional charges may incur if pickup is outside of the scheduled removal days. No walk-in removal will be permitted on this site. Buyers and/or drivers without an appointment or outside of their allotted time slot will be turned away. No exceptions.


*Further information on removal details can be found in the Terms & Conditions tab or in the Lot Catalogue.



TRUCKING AND TRANSPORT SERVICES:

Trucking and transport services, including cross-border logistics, are available through Fuze Logistics Inc. Please contact Chris Tan for a firm quote or any questions regarding transportation.

Fuze Logistics Services Inc.
Chris Tan
941-702-3310
[email protected]

   

 

Water Bottling Lines

SHEN ZHEN (2015) 8 -cavity automated 500ml water bottle line with 11,500 to 15,000 bottles per hour capacity comprising:

  • SHEN ZHEN (2015) feeder with 12l' x 12"w flyted incline conveyor, stainless steel feed hopper S/N: N/A
  • SHEN ZHEN (2015) 6 twin roller type unscrambler /  singulator S/N: N/A
  • HUARE MACHINERY MANUFACTURING CO. (2015) HC-08AC1, 12HP industrial chiller with PLC control S/N: 1508019
  • SHEN ZHEN (2015) 8' gravity fed singulating drop chute conveyor section S/N: N/A
  • SHEN ZHEN (2015) JND-E8, 8 - cavity bottle blow mould machine, DELTA touch screen plc control, 15-gram & 19-gram preform capacity S/N: JFL2015066C
  • SHEN ZHEN (2015) approx. 75' single strand cooling conveyor with (9) 14" 3HP blowers S/N: N/A
  • SHEN ZHEN (2015) JND32-32-8, 32-station washing, filling & capping machine with MITSUBISHI touch screen plc control, 27.5" x 40" feed hopper, 40HP drive, bottle cap feed station (top mounted) S/N: JFL2015-066C
  • SHEN ZHEN (2015) single strand 16' x 3 1/2" powered plastic belt outfeed transfer conveyor section S/N: N/A
  • SHEN ZHEN (2015) single strand 20' x 3 1/2" powered plastic belt outfeed transfer conveyor section S/N: N/A
  • SHEN ZHEN (2015) 7/4 strand 13' x 3 1/2" powered accumulator S/N: N/A
  • SHEN ZHEN (2015) 14/6 strand 21' x 3 1/2" powered accumulator S/N: N/A
  • SHEN ZHEN (2015) U-shaped 21' x 3 1/2" powered plastic belt conveyor S/N: N/A
  • SHEN ZHEN (2015) twin head 32" blow-off section with 2' plastic belt S/N: N/A
  • SHEN ZHEN (2015) JND-500, 12 station rotary glue labeling machine with SCHNIEDER digital touch screen control, 24" label feed table, 3 1/2" plastic belt conveyor s/n: 2015-066C
  • SHEN ZHEN (2015) U-shaped 36' x 3 1/2" single strand powered plastic belt conveyor S/N: N/A
  • SHEN ZHEN (2015) 6/4 strand 20' x 3 1/2" powered accumulator S/N: N/A
  • SHEN ZHEN (2015) single strand u-shaped 28' x 3.25" plastic belt with SHEN ZHEN  5' x 3 ½ plastic belt power conveyor S/N: N/A
  • SHEN ZHEN (2015) JND200A, tunnel type casing machine with SIEMENS PLC control, 12' x 21" belt conveyor, 28" roll dispenser, 10' x 26" heat tunnel with (3) top mounted circulation blowers, overhead cooling box S/N: N/A

SHEN ZHEN (2015) 6-cavity automated 375-ml/500-ml/591-ml/710-ml/1000-ml/1500-ml/ 2000-ml water bottle line with 1,000 to 5,000 bottles per hour capacity comprising:

  • SHEN ZHEN (2015) feeder with 6' x 14"" flyted incline conveyor, stainless steel feed hopper S/N: N/A
  • SHEN ZHEN (2015) JND-E6000, 6 - cavity blow moulding machine with DELTA touchscreen plc control S/N: JFL2015-068
  • SHEN ZHEN (2015) APPROX. 21' single strand cooling conveyor with (3) 14" 3HP blowers S/N: N/A
  • SHEN ZHEN (2015) JND18-18-6, 18-station washing, filling & capping machine with MITSUBISHI touch screen plc control, 27.5" x 40" feed hopper, 40HP drive, bottle cap feed station (top mounted) S/N: JFL2015-068
  • SHEN ZHEN (2015) U-shaped 28' x 3 1/2" powered plastic belt conveyor S/N: N/A
  • SHEN ZHEN (2015) dual head 28" blower station S/N: N/A
  • SHEN ZHEN (2015) 14 / 6 strand 22' x 3 1/2" plastic belt powered transfer conveyor section S/N: N/A
  • SHEN ZHEN (2015) JND-500A, 12 station rotary glue labeling machine with SCHNIEDER digital touch screen control, 24" label feed table, 3 1/2" plastic belt conveyor S/N: 2015-068
  • SHEN ZHEN (2015) 26' x 3 1/2" powered plastic belt conveyor S/N: N/A
  • SHEN ZHEN (2015) JND200A, tunnel type casing machine with SIEMENS PLC control, 12' x 21" belt conveyor, 28" roll dispenser, 10' x 26" heat tunnel with (3) top mounted circulation blowers, overhead cooling box S/N: JFL2015-068

WATER BOTTLING EQUIPMENT

  • SHEN ZHEN 3280T injection moulding machine with plc control, 38" x 38" platen, 67HP S/N: JFL2015-066C
  • SHEN ZHEN (2021) 6000, 6 station blow mould machine with preform temperature controller, 28HP S/N: 202101A010
  • SHEN ZHEN XG300 300BPH, 6 station bottle washer and filling machine with PLC control S/N: JFL2015-066B
  • SHEN ZHEN 5 GAL single station blow moulding machine with THINGET plc control S/N: N/A
  • SHEN ZHEN JND-90 5GAL bottle pre-form heater S/N: JFL201-003
  • HUARE MACHINERY HC-20SAC1, 30HP chiller unit S/N: 150802.1

WATER FILTRATION

  • APPLIED MEMBRANES reverse osmosis filtration unit with APPLIED MEMBRANES I-ROC100S1-AMI controller, PENTAIR STA-RITE pumps, clack filtration tanks, carbon filters S/N: N/A
  • APPLIED MEMBRANES skid mounted twin filtration / pump unit with (2) TCH-0530-316L-2MNPT-VC-EP2 cartridge filters, (2) 5hp centrifugal pumps, 5hp aux centrifugal pump, control panel S/N:102022
  • APPLIED MEMBRANES skid mounted filtration / pump unit with HARSCO BC4-1 25GPM, 4 cartridge filter, 5HP centrifugal pump, 1.5hp aux centrifugal pump, control panel S/N:410305
  • APPLIED MEMBRANES skid mounted filtration / pump unit with HARSCO bc6-3 126gpm 18 cartridge filter, 5hp centrifugal pump, 4hp aux centrifugal pump, control panel S/N: 630126

COMPRESSORS

  • SUZHOU YUDA 3-WH2030-PET skid mounted high pressure air compressor unit with (3) WH2030(2.0/30) 30HP compressor units S/N: 2021012601
  • (8) SHANGAIR 09SH 25HP 1.0bar 3 piston high pressure air compressor S/N: 0922205078 / 0922205077 / 0922205079 / n/a / 0922204067 / 0922204041 / 0922204047 / 0922204054 /
  • (3) HANGZHOU skid mounted air dryer with receiver tank S/N: N/A

PACKAGING EQUIPMENT

  • SHEN ZHEN (2015) JND-MD-OIS automatic palletizer with SIEMENS PLC control, 5'l x 18"w powered belt conveyor section, 8' x 33.5" infeed roll case, pneumatic aligner, (5) magazine pallet feed station S/N: JFL2015-0
  • SHEN ZHEN JND- DT1800 automatic pallet wrapper with siemens SMARTLINE plc control, 71" x 52" turn table S/N: JFL2015-066C
  • MFG N/A pallet wrapper with SIEMENS plc control S/N: N/A
  • (2) BOSCH DOBOY CBS-D continuous band sealer with dual temperature controls, up to 1200" PER/MIN S/N: 1432053; 16-39928
  • WEPACKIT 300E case erector / bottom sealer with 18" X 17" X 15" max box capacity, 7" X 6" X 7" minimum box capacity, speeds to 20 cases PER/MIN S/N: N/A
  • ISHIDA (2018) DACS-G-5060-34/55-N-SC check weigher with PLC control, 3000G – 6000G capacity s/n: n/a
  • THIELE S-20-8 M de-nester S/N:00014
  • CTM 360 SERIES high speed label applicator S/N: 360A-DEMO2-1702
  • (3) VIDEOJET VJ9550 industrial label printer S/N: 16015009PWD; 19199021PWD; 1919020PWD
  • (2) 3M - MATIC case sealer with ACCUGLIDE 2 taping head 21.5" X 21.5" case dimension capacity, 65LBS weight capacity, speeds to 30 cases PER/MIN S/N: N/A
  • WALCO SYSTEMS 355TA traversing alignment table S/N: 91977

DETECTION EQUIPMENT

  • THERMO SCIENTIFIC (2016) NEXTGAURD C330 SP/SR food grade x-ray detection system S/N: 16186335
  • (3) PHANTOM FORTRESS SC-CONV-17255H01613SA pass through type metal detector with 11" X 18" aperture, 70" conveyor, 8" adjustment S/N: CUF1244; CUF1088; CUF1087

ALSO:

  • HUGE inventory of water bottling supplies including preforms, lids, pump caps, technomelt, shred. LARGE offering of bottle dies ranging from 591ML to 5GAL. huge spare parts inventory including belts, hoses, specialized equipment parts, hydraulic fittings, hardware, pallet jacks, pallet racking office furniture and more!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.
DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS
MODALITÉS ET CONDITIONS DE VENTE

Payment

A Buyer's Premium of 19% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN CAD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.
Download Full Payment Information
Download Buyer Deposit Form
CAD Wire Transfer Details
USD Wire Transfer Details
Interac E-Transfer Payment Instructions

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.
 
Please read our Full Terms & Conditions for Removal Requirements

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

Rigger Release Authorization Form

 

Sample of 'Certificate of Insurance' or 'CI'

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services for Small Auction Assets

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact [email protected] to arrange.

Shipping Services for Large Auction Assets

Fuze Logistics Inc. provides reliable transportation and freight forwarding services to ensure your auction purchases arrive safely on time. They offer:

  • Flatbed – For oversized and heavy items
  • Dry Van – For secure and enclosed transport
  • LTL (Less Than Truckload) – Cost-effective shipping for smaller loads
  • Ocean & Air Freight Forwarding – Global shipping solutions for international purchases

Get accurate pricing in advance so you can assess the full cost of acquiring your item before you bid. Contact Fuze Logistics Inc. for pricing requests.

Fuze Logistics Services Inc.
Mr. Chris Tan
1-833-873-3893 x463 (CAD)
1-941-702-3310 (US)
[email protected]
www.fuzelogistics.com

US Inbound Customs Brokers
*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
[email protected]
www.montyinternational.com		 Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
[email protected] or [email protected]
www.omegacb.com