Surplus to the Ongoing Needs of the

North American Stamping Group

Large Multi-Location Stamping Event!

 

Date

Thursday, June 23, 2022

Start Time

10:30 AM EDT

Inspection

BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange a date and time.

Removal

All assets must be removed no later than Thursday, July 14 by appointment only. Rigging details to follow.

Location

Multiple Locations in USA & Mexico

Industry

Stamping
 

Corporate Assets Inc. is pleased to announce the upcoming auction Surplus to the Ongoing Needs of the North American Stamping Group. This sale features a large assortment of stamping presses up to 800 ton capacity—some with large beds and many with variable high speeds! The majority of assets can be inspected under power.


FEATURING: VERSON T-SE2-800-193-48T, 800 Ton large bed straight side stamping press w/ 0-20 SPM & progressive transfer system; BLISS SC2-500-DL–108–54, 500 Ton straight side stamping press w/ 35-60 SPM; MINSTER E2-500-84-48, 500 Ton straight side stamping press w/ 18-27 SPM; NIAGARA FC2-400-84-48, 400 Ton straight side stamping press; APT D-PA-H-400-25, 400 Ton straight side hydraulic stamping press w/ 98.5” x 51.25” bolster; MINSTER S2-300-60-48, 300 Ton straight side stamping press w/ 0-50 SPM; BLOW SDG-250-84-48, 250 Ton straight side stamping press w/ 30-60 SPM; HEIM S2-200-77-42, 200 Ton straight stamping press w/ 30-60 SPM; FLEXO SA150-48-36, 150 Ton high speed straight side stamping press w/ 45-135 SPM; STEELWELD S2-150-48-36, 150 Ton straight side stamping press w/ 30 SPM; MINSTER G1-150-50-30, 150 Ton gap frame OBI stamping press w/ 60 SPM; NIAGARA SC2-150-72-36, 150 Ton straight side stamping press w/ 35-70 SPM; NIAGARA SA2-150-48, 150 Ton high speed straight side stamping press w/ 50-100 SPM; BLISS S2-125-72-42, 125 Ton straight side stamping press w/ 32 SPM; SEYI SN1-88, 88 Ton high speed gap frame stamping press w/ 40-75 SPM; MINSTER P2-75-42-PIECE-MAKER, 75 Ton high speed straight side stamping press w/ 150-300 SPM; MINSTER P2-75-36-PIECE-MAKER, 75 Ton high speed straight side stamping press w/ 0-150 SPM; NIAGARA M-75-36-24, 75 Ton gap frame OBI stamping press w/ 42 SPM; MINSTER G1-75-36-24, 75 Ton gap frame OBI stamping press w/ 40 SPM; MINSTER 6-32-21, 60 Ton high speed gap frame OBI press w/ 90 SPM; WAYNE TRAIL (2010) WTTBD-IV, press transfer system w/ PLC controls; DALLAS 30,000 LB x 48” x .125” press coil feed line; DALLAS 6000 LB x 18” x .125” press coil feed line; COE CPR.PO.15024, motorized uncoiler; DALLAS DRFXS-618, feeder/straightener; BOBCAT 773, diesel front end skid steer; (5) GREAT DANE & WABASH 53’ dry van storage trailers & MORE!

STRAIGHT SIDE STAMPING PRESSES

  • VERSON T-SE2-800-193-48T 800 ton capacity large bed mechanical double crank straight side stamping press with 192” x 55” bolster, 22” stroke, 35.75” max. shut height, 10” slide adjustment, 20 SPM, 61.25” x 56” windows, CEICO K2000 digital control, GUDEL RAPINDEX GULLWING front/rear mounted modular servo transfer system with fully programmable control, 48” pitch, 12” lift, 10” clamp, 24” clamping distance, ALLEN BRADLEY 1500P touch screen control (may be sold separately), BIRMINGHAM (2005) H-0445 heavy duty shear with 4' x 7GA capacity (may be sold separately), s/n: 23664 (Located in Bryan, OH)
  • BLISS SC2-500 DL 500 ton capacity mechanical double crank straight side stamping press with 108” x 54” bolster, 10” stroke, 13”-25” shut height, 12” slide adjustment, 35-60 SPM, 26” x 20” windows, SYSTEK ALLEN BRADLEY PLC SLC 500 control, air clutch, s/n: H-70416 (Located in Portland, TN)
  • MINSTER E2-500 500 ton capacity mechanical double crank straight side stamping press with 84” x 48” bolster, 12” stroke, 46” max. shut height, 10” slide adjustment, 18-27 SPM, 33” x 33” windows, LINKS 5000 control with OMNILINK 806 operator terminal, air clutch, s/n: E2-500-19083 (Located in Bryan, OH)
  • NIAGARA FC2-400-84-48 400 ton capacity mechanical double crank straight side stamping press with 84” x 48” bolster, 10” stroke, 13”-27” shut height, 13” slide adjustment, 35-60 SPM, 35” x 23” windows, SYSTEK ALLEN BRADLEY PLC SLC 500 control, air clutch, s/n: 51017 (Located in Portland, TN)
  • (2) APT DPA-H-400-25 400 ton capacity hydraulic straight side stamping presses with 98.5” x 51.25” bolster, 19.68” stroke, 11.8”-31.5” shut height, variable SPM (based on stroke distance), 40” x 33” windows, SIEMENS SIMATIC 55 PROFACE control, s/n: 9 4-669, 9 4-683 (Located in Bryan, OH)
  • MINSTER S2-300-60-48 300 ton capacity mechanical double crank straight side stamping press with 60” x 48” bolster, 6” stroke, 22.5” max. shut height, 14” slide adjustment, 50 SPM, 24” x 20.5” windows, LINKS 5000 control with OMNILINK II LCD operator terminal, air clutch, (operational, but needs repair), s/n: 8550 (Located in Bryan, OH)
  • BLOW PRESS SDG-250-84-48 250 ton capacity mechanical double crank straight side stamping press with 84” x 48” bolster, 8” stroke, 14”-22” shut height, 8” slide adjustment, 30-60 SPM, 24” x 22” windows, air clutch, s/n: SDG-250-237-85 (Located in Portland, TN)
  • HEIM S2-200 200 ton capacity mechanical double crank straight side stamping press with 77” x 42” bolster, 8” stroke, 13.75” max. shut height, 5.25” slide adjustment, 30-60 SPM, 45” x 22” windows, ALLEN BRADLEY MICROLOGIX 1500 digital control with AUTOMATION DIRECT HMI, air clutch, LINK SYSTEM 2500 die protection, s/n: H-3608 (Located in Ridgeville Corners, OH)
  • NIAGARA SC2-150-72-36 150 ton capacity mechanical double crank straight side stamping press with 72” x 36” bolster, 8” stroke, 19.25” max. shut height, 9” slide adjustment, 35-70 SPM, 30” x 17” windows, LINKS 5000 control with OMNILINK II LCD operator terminal, air clutch, s/n: 50559 (Located in Bryan, OH)
  • STEELWELD S2-150-48-36 150 ton capacity mechanical double crank straight side stamping press with 54” x 36” bolster, 12” stroke, 24” max. shut height, 8” slide adjustment, 30 SPM, 21” x 18” windows, air clutch, s/n: P-1125 (Located in Ridgeville Corners, OH)
  • NIAGARA SA2-150-48 150 ton capacity high speed mechanical single crank straight side stamping press with 48” x 36” bolster, 6” stroke, 17” max. shut height, 4” slide adjustment, 50-100 SPM, 18” x 18” windows, WINTRISS SMARTPAC control with ALLEN BRADLEY PLC, s/n: 51015 (Located in Muncie, IN)
  • FLEXO SA150 150 ton capacity high speed mechanical single crank straight side stamping press with 48” x 36” bolster, 6” stroke, 17.5”-21.5” shut height, 4” slide adjustment, 45-135 SPM, 18” x 18” windows, WINTRISS SMART-PAC digital control, air clutch, s/n: 460206 (Located in Pulaski, TN)
  • BLISS S2-125-72-42 125 ton capacity mechanical double crank straight side stamping press with 72” x 42” bolster, 10” stroke, 12” max. shut height, 7” slide adjustment, 32 SPM, 19” x 15” windows, air clutch, s/n: H-37547 (Located in Ridgeville Corners, OH)
  • MINSTER P2-100-42 100 ton capacity high speed mechanical single crank straight side stamping press with 42” x 31” bolster, 3” stroke, 10”-14” shut height, 4” slide adjustment, 100-200 SPM, 16” x 14.5” windows, WINTRISS SMART-PAC digital control, air clutch, s/n: P2-100-20162 (Located in Pulaski, TN)
  • MINSTER P2-75-42 75 ton capacity high speed mechanical single crank straight side stamping press with 42” x 37” bolster, 2” stroke, 8”-12” shut height, 4” slide adjustment, 150-300 SPM, 16” x 12” windows, HELM-PAK touch-screen control, air clutch, COLT CERF-25-12 servo feeder with 12” x 0.100” capacity (may be sold separately), s/n: P2-75-17288 (Located in Pulaski, TN)
  • MINSTER P2-75-36 75 ton capacity high speed mechanical single crank straight side stamping press with 36” x 31” bolster, 3” stroke, 18.5”-22.5” shut height, 4” slide adjustment, 0-150 SPM, 16” x _15” windows, HELM-PAK touch-screen control, air clutch, s/n: P2-75-19741 (Located in Pulaski, TN)

GAP FRAME PUNCH PRESSES

  • MINSTER G1-150 150 ton capacity mechanical gap frame punch press with 50” x 30” bed, 7.5” stroke, 13.5” max. shut height, 6” slide adjustment, 60 SPM, ALLEN BRADLEY MICROLOGIX 1500 control with WPC WINTRISS clutch/brake control, air clutch, s/n: 15966 (Located in Ridgeville Corners, OH)
  • SEYI SN1-88 88 ton capacity high speed gap frame punch press with 41.3” x 23.5” bed, 5.9” stroke, 9.85”-13” shut height, 3.1” slide adjustment, 40-75 SPM, s/n: EW8-812 (Located in Pulaski, TN)
  • NIAGARA M-75 75 ton capacity gap frame punch press with 36” x 24” bed, 8” stroke, 11” max. shut height, 3” slide adjustment, 42 SPM, s/n: 41436 (Located in Ridgeville Corners, OH)
  • MINSTER G1-75 75 ton capacity gap frame OBI punch press with 36” x 24” bed, 5” stroke, 14” max. shut height, 4” slide adjustment, 40 SPM, air clutch, palm controls, s/n: 16314 (Located in Bryan, OH)
  • MINSTER NO. 6 60 ton capacity high speed mechanical gap frame punch press with 32” x 21” bed, 8” stroke, 10” max. shut height, 3” slide adjustment, 90 SPM, ALLEN BRADLEY MICROLOGIX 1500 control with PROFACE HMI, air clutch, s/n: 6-14896 (Located in Ridgeville Corners, OH)

PRESS ROOM EQUIPMENT

  • WAYNE TRAIL (2010) WTTBD-IV mounted transfer system with 48” pitch, 24” lift, 31” clamp in, 67” clamp out, 36” clamping distance, PLC touch screen control, s/n: W00121 (Located in Queretaro, Mexico)
  • DALLAS DPS 3.5 7-48 83571 uncoiler/feeder/straightener with 30,000 lb. capacity, 20”-24” coil ID, 72” max. coil OD, 0.125” x 48” /0.188” x 24”, (5) roll straightener, s/n: 18235 (Located in Portland, TN)
  • COE CPR.PO.15024 approx. 15,000 lb. capacity motorized uncoiler with 20”-24” reel ID, 72” reel OD, 25” max. reel width, s/n: 26652 (Located in Bryan, OH)
  • DALLAS DDCR-6000# x 18RH 6,000 lb. capacity tandem uncoiler with 18”W x 72” OD, 16”-21” coil ID, s/n: 20844 (Located in Muncie, IN)
  • DALLAS INDUSTRIES DRFXS-618/PTS-3.5-9-18 combination servo feeder/straightener with 0.156” x 18”W capacity, (9) roll straightener, MICROLOGIX 1100 control, s/n: 22900 (Located in Bryan, OH)
  • DALLAS DRF-418-RH/DPS-3-9-18-RH combination servo feeder/straightener with 0.125” x 18”W capacity, (5) roll straightener, s/n: 20847 (Located in Muncie,  IN)

ROLLING STOCK

  • BOBCAT 773 skid steer loader with KUBOTA V2203 diesel engine, approx. 3,900 lb. capacity, 73” bucket attachment, 6310 hrs (recorded on meter at time of listing), s/n: 517618222 (Located in Ridgeville Corners, OH)
  • (3) WABASH 53’ enclosed tandem axle dry van storage trailers with 68,000 lb. max. load capacity, VIN: 1JJV532D3CL570044, 1JJV532W51L733307, 1JJV532D0CL550673 (Located in Ridgeville Corners, OH)
  • GREAT DANE 53’ enclosed tandem axle dry van storage trailer with 68,000 lb. max. load capacity, VIN: 1GRAA06204T503970 (Located in Ridgeville Corners, OH)
  • GREAT DANE 53’ enclosed tandem axle dry van storage trailer with 66,000 lb. max. load capacity, VIN: 1GRAA06236T527778 (Located in Ridgeville Corners, OH)

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com