Michael Tool & Mold (Windsor) Limited

Pristine Automotive Mold Manufacturing Facility

 

Date

Wednesday, May 31, 2023

Start Time

10:30 AM EDT

Inspection

Tuesday, May 30 from 9 AM to 5 PM or by appointment. Please email info@corpassets.com to arrange.

Removal

All assets must be removed no later than Friday, June 16 by appointment only. Rigging details below.

Industry

Machining
 

FEATURING: YAMA SEIKI (2021) VP-3012, CNC bridge type vertical machining center w/ 10,000 RPM, 50 Taper Spindle (ONLY 1000 HOURS – LIKE NEW); QUASER (2015) MV214P/12B, high speed CNC vertical machining center w/ 12,000 RPM (ONLY 1500 HOURS); ZAYER KF 4000, CNC bed type horizontal milling machine w/ 60” x 120” table (RETROFIT MTI CNC CONTROL); (4) FADAL CNC vertical machining centers (RETROFIT MTI CNC CONTROLS); FPT LEM 5 SL, CNC bed type horizontal machining center; WOTAN table type horizontal boring mill; MAYSON 4 post hydraulic spotting press w/ shuttle table; MAYSON hydraulic spotting press; ZAP EDM CNC ram type EDM (NEW CONTROL UNIT IN 2018); JS EDM ram type EDM; PRECISION DC 150, CNC ram type EDM; (4) BRIDGEPORT & FIRST vertical milling machines; TOS SN400N, gap bed engine lathe; TOS SN45B, gap bed engine lathe; (2) FLEX-ARM pneumatic tapping machines; GARDNER DENVER air compressor package; TORIT dust collector; KENWORTH (2005) tri-axle flatbed truck w/ roll up tarp system, 35’ bed etc.; FORD (2006) F-550 XL SUPER DUTY, single axle flatbed truck w/ roll up tarp system, 20’ bed etc.; YALE 7,400 lb indoor LPG forklift; DEMAG 15 ton twin hook double girder overhead bridge crane w/ (1) 15 ton and (1) 10 ton hoist; HUGE OFFERING OF high precision tooling, machine tool accessories, general machining support equipment, lifting equipment & accessories, factory support equipment, inspection and quality control equipment, office furniture & MUCH MORE!

Rigging and Removal Details

THE EXCLUSIVE RIGGER FOR THIS SALE IS:
National Rigging and Transportation
Darren Chapman
C: 905-704-9011
darren@nationalrigging.com


*All assets must be removed no later than Friday, June 16. For everyone’s safety removal at this site is conducted strictly by appointment only. All machinery buyers must contact Darren Chapman 905-704-9011 to set their pick-up appointments upon payment in full.

*Further information on removal details can be found in the Terms & Conditions tab or in the Lot Catalogue.


TRUCKING AND TRANSPORT SERVICES:

Trucking and transport services, including cross-border logistics, are available through Fuze Logistics Inc. Please contact Chris Tan for a firm quote or any questions regarding transportation.

Fuze Logistics Services Inc.
Chris Tan
514.799.4162
machinerylogistics@fuzelogistics.com

   

 

HIGH-SPEED CNC BRIDGE-TYPE VERTICAL MACHINING CENTER

  • YAMA SEIKI AWEA (2021) VP-3012 high-speed CNC bridge-type vertical machining center with FANUC SERIES OI-MF PLUS CNC control, 118.11" x 43.31" table, travels: X-118.1", Y-47.2", Z-29.9", 9,900 LB max. table load, CAT 50 spindle taper, 32-station ATC, speeds to 10,000 RPM, 1,173 spindle hours recorded on meter at time of listing, coolant, (2) chip augers, FONGEX chip conveyor, ALLCOOL SYSTEMS R1000 chiller, WEXTEN oil cooler, 220V/3PH/50-60HZ, s/n VB32004

CNC VERTICAL MACHINING CENTERS

  • QUASER (2015) MV214P/12B high-speed CNC vertical machining center with FANUC SERIES OI-MD CNC control, 66.9" x 27.5" table, travels: X-60", Y-27.5", Z-24", 29.9" max. distance spindle nose to table top, spindle speeds to 12,000 RPM, CAT 40 spindle taper, 48-station ATC, 5,748 spindle hours (recorded on meter at time of listing), 47 HP, coolant, (2) chip augers, FONGEX chip conveyor, 208V/3PH/60HZ, s/n 114K150439
  • FADAL (R&R 2001) VMC-6030 CNC vertical machining center with WINDOWS-PC based MTI CNC control, 62" x 30" table, travels: X-60", Y-30", Z-30", spindle (rebuilt 2012) speeds to 10,000 RPM, CAT 40 spindle taper, 21-station ATC, coolant, 230V/3PH/50-60HZ, s/n 032001092768
  • FADAL 904-1 high-speed CNC vertical machining center with WINDOWS-PC based MTI CNC control, 39.5" x 16" table, travels: X-22", Y-16", Z-20", spindle speeds to 15,000 RPM, CAT 40 spindle taper, 21-station ATC, coolant, 230-440V/3PH/60HZ, s/n 9605603
  • FADAL 906-1 CNC vertical machining center with WINDOWS-PC based MTI CNC control, 48" x 20" table, travels: X-40", Y-20", Z-27", spindle speeds to 10,000 RPM, CAT 40 spindle taper, 21-station ATC, coolant, 230-440V/3PH/60HZ, s/n 9502970
  • FADAL 904-1 high-speed CNC vertical machining center with WINDOWS-PC based MTI CNC control, 39.5" x 16" table, travels: X-30", Y-16", Z-20", spindle speeds to 15,000 RPM, CAT 40 spindle taper, 21-station ATC, coolant, 230V/3PH/50-60HZ, s/n 9702285

CNC UNIVERSAL BED-TYPE BORING & MILLING MACHINES

  • ZAYER KF 4000 CNC universal bed-type boring & milling machine with MTI (retrofit 2017) WINDOWS-PC based CNC control, 7" spindle (rebuilt 2019), 157.48" x 51.25" t-slot table, travels: X-145.67" (longitudinal), Y-49.21" (cross), Z-77.17" (vertical), ISO 50 taper spindle, speeds to 3,000 RPM, 2-axis conventional universal milling head (may be sold separately), s/n 40202
  • FPT LEM5/SL CNC universal bed-type boring & milling machine with HEIDENHAIN CNC control, 5" spindle (rebuilt 2019), 118.5" x 35.75" t-slot table, travels: X-98.43" (longitudinal), Y-35.43" (cross), Z-39.37" (vertical), ISO 50 taper spindle, speeds to 2,000 RPM, 2-axis conventional universal milling head (may be sold separately), s/n 58943

TABLE-TYPE HORIZONTAL BORING MILL

  • WOTAN B 100S table-type horizontal boring mill with 6" spindle, 54.75" x 43.25" rotary t-slot table, ISO 50 taper spindle, speeds to 1,600 RPM, ACU-RITE DRO200E 3-axis DRO, s/n 52321

DIE SPOTTING PRESSES

  • MAYSON 7757 200 TON 4-post hydraulic die spotting press with conventional control, 44" x 68" box table, 86.5" open height, 62" x 100" shuttle-type bottom platen, 85" x 106" top platen, 600V/3PH/60HZ, s/n 5778-96A
  • WHITE EAGLE 200 TON 4-post hydraulic die spotting press with conventional control, 38" x 56" box table, 74" open height, 88" x 52" top & bottom platen, 600V/3PH/60HZ, s/n N/A

SINKER-TYPE EDMS

  • JSEDM NC 909N 120A 4-axis CNC sinker type EDM with EDM ZAP ADVANTAGE CNC control, 31.5" x 66.75" table, travels: X-70", Y-27", Z-18", S/N BC954-4NC
  • SERVOTECH 3X4EDM sinker type EDM with PRECISION EDM PRODUCTS D-150 control, travels: X-37.92", Y-30.31", Z-19", W-9.8”-47.8", ACU-RITE 3-axis DRO, 575V/3PH/60HZ, s/n R1370400
  • XERMAC SERVOTECH POWEREDM sinker type EDM with PRECISION EDM PRODUCTS D-150 control, 24" x 36" table, ACU-RITE 3-axis DRO, 460V/3PH/60HZ, s/n R160

OVERHEAD BRIDGE CRANE

  • DEMAG double girder top running overhead bridge crane with wired pendant control, DEMAG 15 TON main hoist, DEMAG 10 TON auxiliary hoist, approx. 43' span, 16' height under the hook, s/n 84707

ROLLING STOCK

  • KENWORTH (2006) T800 tri-axle flat deck truck with quick draw roll back tarp system, 28' x 8' metal deck, 512,472 KM (recorded on meter at time of listing), CUMMINS ISM 370 diesel engine, EATON FULLER 10-speed manual transmission, 74,500 LB GVWR, 13,000 LB front, 20,000 LB rears, 21,500 LB drop axle, vin 1NKDXOEX26J986653
  • FORD (2004) F-550 XL super duty flat deck truck with quick draw roll back tarp system, 16' x 8' aluminum deck, 212,732 KM (recorded on meter at time of listing), POWERSTROKE V8 turbo diesel engine, automatic transmission, 18,950 LB GVWR, vin 1FDAF56P24ED97817
  • YALE GLC080LGNGAE085 7,400 LB capacity LPG forklift with 60" forks, 185" max. vertical reach, tilt, side-shift, cushion tires, 6,712 hours (recorded on meter at time of listing), s/n B818N01927X

WELDING & FABRICATION

  • MILLER SYNCROWAVE 250 DX digital TIG welder with MILLER COOLMATE V3 chiller, cables & gun, s/n LB214163
  • MILLER DIALARC HF TIG welder with MILLER COOLMATE 3 chiller, cables & gun, s/n JC616645
  • DYTRON CORP MICROTRON VRTPM-200 TIG welder with cables, gun & handcart, s/n N/A
  • PLYMOVENT fume extractor, s/n N/A
  • COOLIT I chiller, s/n N/A
  • LASTEK oxy-acetylene torch, s/n N/A

CONVENTIONAL MACHINE TOOLS

  • TOS TRENS TRENCIN SN 400N gap bed engine lathe with 16.14" swing over bed, 78.74" between centers, 3" spindle bore, speeds to 2,000 RPM, IN/MM threading, 12" 3-jaw chuck, s/n 68004020010198
  • TOS SN 45B gap bed engine lathe with 17.72" swing over bed, 79.37" between centers, 2" spindle bore, speeds to 2,000 RPM, IN/MM threading, 12" 3-jaw chuck, s/n 045200760627
  • BRIDGEPORT vertical milling machine with 42" x 9" table, speeds to 2,720 RPM, power table feed, ACU-RITE QWIKCOUNT II 2-axis DRO, s/n J74971
  • BRIDGEPORT 70745 vertical milling machine with 42" x 9" table, speeds to 4,200 RPM, ACU-RITE QWIKCOUNT II 2-axis DRO, s/n 146
  • (2) FIRST LC1-1/2VS vertical milling machines with 42" x 9" tables, speeds to 4,500 RPM, ACU-RITE QWIKCOUNT II 2-axis DROS, s/n 74045867; 74045868
  • CHEVALIER FSG-3A1224H hydraulic surface grinder with KINJUNG KET-3060K 12" X 24" electro-magnetic chuck, coolant with paper filtration, s/n N/A
  • (2) CHEVALIER FSG-618 surface grinders with WALKER-HAGOU BV MODEL 20 6" X 18" magnetic chucks, s/n 02B-4018; 02B-4021
  • TOS HOSTIVAR 2UD 750 cylindrical grinder with 11.41” swing, 29.52” between centers, 14” dia. wheel, coolant, s/n 25602
  • STANKO 8A531 vertical bandsaw with 22" x 22" tilting table, blade welder/grinder, s/n 1078
  • JAESPA W 260 horizontal bandsaw with manual vise, coolant, s/n 13995 86
  • W.F. WELLS & SONS INC. horizontal bandsaw with manual clamping, coolant, in-feed conveyor, s/n N/A
  • ALEXANDER 2CGD tool & cutter grinder, s/n 154
  • FORWARD U2 tool & cutter grinder, s/n N/A
  • MICHAEL DECKEL S0 tool & cutter grinder, s/n 87-23492
  • FORD-SMITH 41-P 2 HP double end pedestal grinder, 550V/3PH/60HZ, s/n M064-2
  • BLACK & DECKER PROFESSIONAL abrasive cut off saw, s/n N/A
  • MFG UNKNOWN 12" disc sander, s/n N/A
  • FLEXARM hydraulic tapping arm with collets, s/n 023326
  • FLEXARM pneumatic tapping arm with collets, s/n 022646

FACTORY SUPPORT EQUIPMENT

  • DONALDSON VS 1 HP portable dust collector, s/n IG080089
  • MIKRO PULSAIRE 25S-6-30 mist & dust collector with bag-type filtration & ductwork, s/n CP73-3-1032
  • UAS (2000) SH-20-PE-H smog-hog mist collector with 9-7-M blower, 575V/3PH/60HZ, s/n 60045030
  • CHECKER INDUSTRIAL (2013) portable hydraulic power pack with 15 HP motor, s/n 1276
  • PARKER KARRYKRIMP bench-mounted hydraulic hose crimper with foot pedal control, s/n 82C-1211-1-090
  • FEIN KBM50QX magnetic based drill, s/n 2011-03.000572
  • MFG UNKNOWN 1,000 LB capacity portable rolling gantry system with KITO 1/4 TON electric hoist, approx. 8' span, s/n 523939
  • (2) DILLON ED JUNIOR 25,000 LBF capacity crane scales
  • BISON SLINGMASTER 8,000 LB capacity tong set, s/n 137432
  • THE CALDWELL GROUP DLT LUCKER 3,000 LB capacity tong set, s/n 68785
  • (2) MOBILE MATERIALS HANDLING EQUIPMENT B60SA 1,500 LB capacity hydraulic die lifting carts

ALSO:

  • LARGE SELECTION OF: welding benches, supplies & consumables; machine tools including mill tooling, drill chucks, collets, reamers, end mills, taps, drills, grinding wheels & live centers; machine vises, machine vises; (7+) magnetic chucks, 40 & 50 taper tool holders; transformers; inspection equipment; (5) HUSKY 4-drawer rolling tool cabinets; (5) HUSKY 5-drawer rolling tool cabinets; (6) HUSKY 6-drawer rolling tool cabinets; (14) steel saw horses; (3) lifting magnets; lifting chains & rigging supplies; (2) rolling dumping hoppers; angle plates; sine plates; set up blocks; power tools; bessey clamps; hand tools & MUCH MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN CAD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com