Machining & Fabricating Event

Late Model Saws, Positioners, Tool Room Equipment & More!

 

Date

Wednesday, August 10, 2022

Start Time

10:30 AM EDT

Inspection

BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange a date and time.

Removal

All assets must be removed no later than Wednesday, August 24 by appointment only. Email pickup@corpassets.com to arrange a date and time.

Industry

Fabricating | Machining
 

 

 

FEATURING: MINELLI (2017) MC 620 F heavy duty hydraulic alligator shear; LJ WELDING AUTOMATION (2015) 2PT-300 tilt and rotate welding positioner; LJ WELDING AUTOMATION (2016) T50-200 3-jaw pipe gripper; IRCO HB12 tilt and rotate welding positioner; IRCO 3-jaw pipe gripper; (2) LJ WELDING AUTOMATION (2017) TRN2HS-300 rotary welding positioners; LJ WELDING AUTOMATION 8P-200 tilt and rotate bench type welding positioner; GULLCO (2011) KR-200-L-B bench type powered pipe turning roll set; N.KO BEVELER UZ 20 heavy duty floor type beveling, deburring & chamfering machine; BOMAR (2008) 610.440 GH automatic horizontal band saw; HYD-MECH (2007) S-23A automatic horizontal band saw; KASTO HBA 420 AU dual column automatic horizontal band saw; BAXTER VERTICUT 175B roll-in vertical band saw; T-JAW 450 vertical band saw; SCM SI15F sliding table conventional saw; HAAS HA5C P1 single axis 5C collet indexer; POWERTURN CL6233X1000 gap bed engine lathe with 13” swing, 40” between centers; HARDINGE HC tool room precision automatic chucking lathe; FIRST LC-1 1/2VS vertical milling machine; FIRST LC-185VS vertical milling machine; FORWARD 1050K vertical milling machine; ERLO TC-30 floor type gear head drill; CHEVALIER FSG-618M conventional surface grinder; MITUTOYO PH-A14 optical comparator with 14” screen, MITUTOYO QM-DATA 200 DRO; R&M MATERIAL HANDLING SPACEMASTER SX 7.5 ton capacity crane hoist; (4) AIRFLOAT SC-1-17 aluminum airlift skids; (2) AIRFLOAT H-0024 24” air bearing airlift steel skids; (4) SOLVING (2011) SE12-1.8-LP aluminum air bearing casters; (4) AIRFLOAT 20” air bearing airlift steel skids; HONDA (2018) EG5000CL 5,000 WATT gas powered generator; MIMAKI (2014) JV5-160S large format high-speed solvent inkjet printer; (2) BROTHER GT-381 digital inkjet garment printer; ALSO: Large quantity of precision perishable tooling, inspection equipment, factory support equipment & MORE!

RIGGING AND REMOVAL DETAILS

*For everyone’s safety removal at this site is conducted strictly by appointment only. All machinery buyers must contact PICKUP@CORPASSETS.COM to set their pick-up appointments upon payment in full.

HYDRAULIC ALLIGATOR SHEAR

  • MINELLI (2017) MC 620 F heavy duty hydraulic alligator shear with 21.65" (550 mm) blade, 11.81" (300 mm) max jaw opening, 262 ton (288 US TON) capacity, full adjustable automatic hydraulic hold down, foot pedal controls, rebar shear and processing configuration, full safety cage enclosure with interlocks over cutting head, removable optional guide and run-off table, 50 HP hydraulic power pack, bronze bushings, HARDOX wear plates, 600V/3PH/60Hz, 8,370 lbs total machine weight, Ontario electrical and PHSR safety certificates, s/n 2000 17001

WELDING POSITIONERS

  • LJ WELDING AUTOMATION (2015) 2PT-300 tilt and rotate welding positioner with 6,000 lbs. max capacity, 48” diameter T-slot table, 0-90 degree power tilt, 0.1-2.5 rpm digitally controlled variable speed rotation, 30”-50” adjustable center height in 5” increments with locking pins, foot pedal and panel controls, 600v/3ph/60hz, s/n 029
  • LJ WELDING AUTOMATION (2016) T50-200 3-jaw pipe gripper with 10,000 lbs. max capacity, 2”-50” workpiece diameter range, s/n 136
  • IRCO HB12 tilt and rotate welding positioner with 3,440 lbs. max capacity, 39.5” diameter T-slot table, 0-120 degree power tilt, 0.1-1 rpm digitally controlled variable speed rotation, hand pendant and panel controls, 600v/3ph/60hz, s/n 14250X
  • IRCO 3-jaw pipe gripper with 3,000 lbs. max capacity, 4”-25” workpiece diameter range, s/n 33443
  • LJ WELDING AUTOMATION (2017) TRN2HS-300 rotary welding positioner with 4,000 lbs. max capacity, 30” diameter T-slot table, 0.2-10 rpm digitally controlled variable speed rotation, foot pedal and panel pendant control, ground and inert gas connectors, 110v/1ph/60hz, s/n 001
  • LJ WELDING AUTOMATION TRN2HS-300 rotary welding positioner with 4,000 lbs. max capacity, 30” diameter T-slot table, 0.2-10 rpm digitally controlled variable speed rotation, foot pedal and panel pendant control, ground and inert gas connectors, 110v/1ph/60hz, s/n 186
  • LJ WELDING AUTOMATION 8P-200 tilt and rotate bench type welding positioner with 300 lbs. max capacity, -15/+105 degree manual adjustable tilt in 15 degree increments, 19.5” diameter custom drilled and tapped table, 0.7-7 rpm digitally controlled variable speed rotation, foot pedal and panel pendant control, ground and inert gas connectors, 110v/1ph/60hz, s/n n/a
  • GULLCO (2011) KR-200-L-B bench type powered pipe turning roll set with 1,500 lbs. max workpiece capacity, 2”-16” workpiece diameter range, 1-35 ipm digitally controlled infinitely variable speed with fwd/rev foot pedal controls, GULLCO KR-750 idler roll, 110v/1ph/60hz, s/n 29599-5

PLATE BEVELLER

  • N.KO BEVELER UZ 20 heavy duty floor type beveling, deburring & chamfering machine with 30-60 degree infinitely variable beveling angle, .60”-1.00” max bevel width, 15.75”-23.5” workpiece width, .10”-1.60” workpiece thickness, spindle speeds to max 5,500 rpm, power feed, ball assist table, 480v/3ph/60hz, s/n n/a

CNC PIPE CUTTER

  • WATTS W-122 CNC pipe cutting machine with WATTS PIPESERVER DESIGNER WINDOWS PC based CNC control with CAD compatibility and remote support connectivity, 24’ bed, 1.9” – 12.75” pipe diameter working range, 6,000 lbs. max workpiece weight, 90-30-37.5 degree indexable beveling capacity, THERMAL DYNAMICS CUTMASTER A80 plasma power supply with torch and control interface, s/n n/a

SAWS

  • BOMAR (2008) 610.440 GH automatic horizontal band saw with BOMAR programmable digital microprocessor control 25” x 17” max cutting capacity, hydraulic vise, 251" x 1.5" blade, variable speed blade, 0-60 degree max miter capability, coolant, infeed conveyor, 5hp/400v/3ph/50hz s/n: 055
  • HYD-MECH (2007) S-23A automatic horizontal band saw with HYD-MECH programmable digital microprocessor control, 16"x18" cutting capacity, hydraulic bundling vise, hydraulic bundling shuttle vise with 29" stroke, 180" x 1.25" blade, variable speed blade, 0-90 degree miter capability, coolant, 5hp/575v/3ph/60hz, s/n: XA0607476FD
  • KASTO HBA 420 AU dual column automatic horizontal band saw with KASTO control, 16.5"x16.5" cutting capacity, hydraulic vise, hydraulic bundling shuttle vise with 24" stroke, variable blade speed, coolant, chip conveyor, infeed roller conveyor, 13.5hp/440v/3ph/50hz s/n: 6019 108 003
  • BAXTER VERTICUT 175B roll-in vertical band saw with 10” max cutting capacity, 3/4hp/110v/1ph/60hz, s/n 3360
  • T-JAW 450 vertical band saw with 20”x22” tilting table, 18” throat, 12” max workpiece height, variable blade speed, 110v/1ph/60hz, s/n 2146741
  • SCM SI15F sliding table conventional saw with 60"x10" sliding table, 60" table stroke, 7.5 HP main blade with speeds to 3200-4500-6000 RPM, 14" diameter blade, 0-45 degree tilting arbor, s/n AB.10724

PUNCH PRESS

  • BLOW #4 40 TON 'C' frame mechanical punch press with 14" x 9" RAM, 15" x 30" bed, RAM adjustment, palm button control, WICHITA air clutch, PETERSON DDR 63HS 6" precision mechanical roll feeder, 575V/3PH/60HZ, s/n 4277A0

CONVENTIONAL MACHINE TOOLS

  • HAAS HA5C P1 single axis 5C collet indexer with HAAS brushless programmable control, 360 degree indexing in 0.001-degree increments, 4” center height, s/n 511366
  • POWERTURN CL6233X1000 gap bed engine lathe with 13” swing, 40” between centers, 1.5” spindle bore, 6” 3-jaw chuck, 8” 4-jaw chuck, speeds to 1800 rpm, in/mm threading, quick change tool post, steady rest, follow rest, coolant, 600v/3ph/60hz, s/n 641502
  • HARDINGE HC tool room precision automatic chucking lathe with 13” swing over bed, 13” max distance spindle to turret face, speeds to 3000 rpm in (3) ranges, 5C collet chuck with lever closer, HARDINGE CT-A automatic threading attachment, variable speed carriage, coolant, 200v/3ph/60hz, s/n HC-5128-T
  • FIRST LC-1 1/2VS vertical milling machine with 9"x42" table, speeds to 4500 RPM infinitely variable, 2 HP, R8 spindle taper, HEIDENHAIN 2-axis DRO, 575v/3ph/60hz, s/n: 70124618
  • FIRST LC-185VS vertical milling machine with 9"x42" table, speeds to 4500 RPM infinitely variable, 2 HP, R8 spindle taper, 575v/3ph/60hz, s/n: 82080175
  • FORWARD 1050K vertical milling machine with 10"x50" table, speeds to 2720 RPM, 2 HP, R8 spindle taper, 575v/3ph/60hz, s/n: 1938
  • ERLO TC-30 floor type gear head drill with speeds to 1704 rpm, 7” stroke, MT#3 spindle taper, 10” throat, manual table elevation, 2hp/575v/3ph/60hz, s/n 958
  • CHEVALIER FSG-618M conventional surface grinder with 6"x18" table, speeds to 2800 RPM, s/n: A3828072
  • HARIG 612 conventional surface grinder with 6"x12" table, speeds to 3400 RPM, s/n: 10280
  • JET 8” double end pedestal grinder, 110v/1ph/60hz, s/n n/a
  • KALAMAZOO combination 6” belt 12” disk sander, 575v/3ph/60hz, s/n n/a
  • POWERFIST portable sandblast cabinet with top loading door and rolling stand, s/n n/a
  • RUSH MACHINERY (2012) rejuvenator drill sharpener with 6” 6-jaw chick, S/N R1107

OPTICAL COMPARATOR

  • MITUTOYO PH-A14 optical comparator with 14” screen, MITUTOYO QM-DATA 200 DRO, s/n 601024

FACTORY SUPPORT EQUIPMENT

  • R&M MATERIAL HANDLING SPACEMASTER SX 7.5 ton capacity crane hoist with 29.5’ max height under the hook, 3.3 ft/min hoisting speed, powered monorail trolley with 65 ft/min travel speed, hand pendant control, 575v/3ph/60hz, s/n HHW18362
  • MOBILE INDUSTRIES B60CSA electric die lift cart with 1,500 lbs. capacity, POWERFIST battery charger, s/n 16818
  • (4) AIRFLOAT SC-1-17 aluminum airlift skids with 17” diameter, s/n n/a
  • (2) AIRFLOAT H-0024 24” air bearing airlift steel skids with 12,500 lbs. capacity, s/n n/a
  • (4) SOLVING (2011) SE12-1.8-LP aluminum air bearing casters with 3,850 lbs. capacity, s/n n/a
  • (4) AIRFLOAT 20” air bearing airlift steel skids with 8,250 lbs. capacity, s/n n/a
  • SOLVING (2011) MLS412 X portable air caster control manifold with valves, s/n 412-0021
  • HONDA (2018) EG5000CL 5,000 WATT gas powered generator with 120/240V output, 4.5 KVA, 3600 RPM, digital auto voltage regulator, s/n: n/a
  • CRAFTSMAN LT 12 novelty ride-on lawn tractor with 12 hp BRIGGS & STRATTON gas engine, 5 forward speeds, 1 reverse, mower deck, s/n n/a
  • GE PROFILE MAX PDW8281J10SS stainless steel under counter dish washer, 120v/1ph/60hz, s/n SL773378B
  • WHIRLPOOL WHES40 LL40 digital water softener with max 8.5 GPM flow rate, max 125 PSIG rated, 120v/1ph/60hz, s/n 17205-1070

LARGE FORMAT & GARMENT PRINTING

  • MIMAKI (2014) JV5-160S large format high-speed solvent inkjet printer with 63" max. printing width, 1440 max. dpi, digital control, s/n: F148B360
  • BROTHER GT-381 digital inkjet garment printer with 14"x16" max. printing area, (2) print heads, one-pass printing, s/n: n/a
  • BROTHER GT-381 digital inkjet garment printer with 14"x16" max. printing area, (2) print heads, one-pass printing, s/n: n/a
  • IDT SYSTEMS LTD. D10.3 3D sublimation heat press with 19"x20"x27"D interior dimensions, (2) digital temperature gauges, s/n: n/a
  • IDT SYSTEMS LTD. D10.3 3D sublimation heat press with 19"x20"x27"D interior dimensions, (2) digital temperature gauges, s/n: n/a
  • IDT SYSTEMS LTD. D10.3 3D sublimation heat press with 19"x20"x27"D interior dimensions, (2) digital temperature gauges, s/n: n/a

SPECIALTY GRINDER

  • GRINDRITE ST-1800XL ski and snowboard tuning machine with 5.5 HP, 90 lb. capacity, 13” sanding and grinding drums, variable speeds, power feed, coolant, diamond dresser with advance adjustment to 0.001”, 240V/1PH/60HZ, s/n: J01840

ALSO:

  • MACHINE TOOL ACCESSORIES including HAIMER CAT-40 heat shrink tool holders, lathe chucks, R-8 collets and drill chucks, machine vises, angle plates and collet indexers with plates; selection of perishable tooling comprising precision drills, end mills, carbide insert cutters and large quantity of carbide inserts; inspection and QC equipment consisting of SUNNEN gauge setting fixtures, precision gauges, GO/NO-GO gauges, plug gauges, ring gauges and pin gauge sets; tools, factory equipment, dumping hoppers and MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN CAD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com