Machining and Fabricating Facility

Short Notice Sale - Surplus Assets of a Family Operated Machining and Fabricating Facility!

 

Date

Wednesday, August 10, 2022

Start Time

12:30 PM EDT

Inspection

Tuesday, August 9 from 9:00 A.M. to 5:00 P.M. BY APPOINTMENT ONLY. Please call 416.962.9600 for details.

Removal

All assets must be removed no later than Wednesday, August 17 by appointment only. Email pickup@corpassets.com to arrange a date and time.

Industry

Fabricating | Machining
 

 

 

FEATURING: AMADA VIPROS255 CNC turret punch; HACO ERMS 36-150 12’ x 150 ton CNC hydraulic press brake; PLASMACAM 60” x 60” CNC plasma cutting table; AMF 3013 10’ x ½” hydraulic shear; HAAS SL20 CNC turning and live milling center; MEGAMILL VMC3060 vertical machining center; KBC TCM-1000 CNC vertical milling machine; MAXIMART R-0545H ALROLL 5’ X 3/16” power bending rolls; KINGSLAND J21 66-ton iron worker; RICHMOND HERALD 600 4’ radial arm drill; EX-CELL-O 602 vertical milling machine; TARNOW TUJ50 X 3000 gap bed engine lathe; GISHOLT NO.3 mechanical turret lathe; HYD-MECH S-20A horizontal bandsaw; DEWALT 535 radial arm saw; BROWN BOGGS 36 eccentric c-frame punch press; WEBER hydraulic h-frame shop press; HAVLIK OBI mechanical punch press; COLLOCRIMP T-400 hydraulic hose crimper; ENERPAC hydraulic hose crimper; ESAB HELIARC 252 AC/DC TIG welder; ESAB HELIARC 352 AC/DC TIG welder; HOBART MEGA-MIG 450-RVS MIG welder; LINCOLN ELECTRIC 350MP POWERMIG MIG welder, (2) MILLER CP-200 MIG welders; HYPERTHERM POWERMAX 1000 G3 SERIES plasma cutter; NEDERMAN 1 HP portable fume extractor; CUSTOM hydraulic pipe & conduit bender; RIDGID 300 pipe threader; TOYOTA FBCA30 5,500 LBS electric forklift; YALE GLP 060TFNUAV081SR 6,000 LBS LPG forklift; CLARK C500-45 5,000 LBS LPG forklift; ECOMOMY 2046 24v electric scissor lift; GARAGA SOLFAVIDOOR (BRAND NEW) 16’ X 14’ complete overhead garage door kit; LARGE SELECTION OF AMADA turret punch tooling including auto-indexing tooling, conventional punches and dies; selection of press brake dies; live milling holders; turning tool holders; (40+) CAT 40 tool holders; (5+) KURT 6” machine vises; VOLKSWAGEN JETTA TDI sedan manual; factory equipment including MILWAUKEE mag base drill, electric power tools, custom pipe and conduit benders, 2-stage piston type compressor with refrigerated air dryer and receiver tank; shop tables, work benches, sheet metal racking, cantilever racking, lockers, file cabinets and MORE!

THE EXCLUSIVE RIGGER FOR THIS SALE IS:

National Rigging and Transportation
Darren Chapman
O: 905-788-1110 • C: 905-704-9011
darren@nationalrigging.com


*For everyone’s safety removal at this site is conducted strictly by appointment only. All machinery buyers must contact darren@nationalrigging.com to set their pick-up appointments upon payment in full.

CNC TURRET PUNCH

  • AMADA VIPROS255 20 ton capacity CNC turret punch with FANUC SERIES 18-P CNC control, 50” x 100” max sheet size, ¼” max sheet thickness, 230 lbs. max sheet weight, travels: x-50”, y-50”, max 410 strokes per minute, 1.57” max stroke, 31 station turret with (3) auto-indexing stations, turret speeds to 35 rpm, ball-assist table, KOOLANT chiller, 230v/3ph/60hz, s/n 25510342

CNC PRESS BRAKE

  • HACO (2005) ERMS 36-150 12’ x 150 ton CNC hydraulic brake press with HACO ATS 2-axis CNC back gauge, 150 ton capacity, 144’ bed, 124” between housings, safety light curtains, 575v/3ph/60hz, s/n 82346

CNC PLASMA CUTTING TABLE

  • PLASMACAM 60” x 60” CNC plasma cutting table with PLASMACAM WINDOWS PC-BASED CNC control, 60” x 60” slat table, HYPERTHERM POWERMAX 1100 plasma power source with cables & torch, 440v/3ph/60hz, s/n 1100-012263

HYDRAULIC SHEAR

  • AMF 3013 10’ x ½” hydraulic shear with front operated power back gauge, hydraulic clamping, squaring arm, upgraded LED light, 600v/3ph/60hz, s/n G6020-99

CNC TURNING AND LIVE MILLING CENTER

  • HAAS SL20 CNC turning and live milling center with HAAS CNC control, 23” swing, 10” max turning diameter, 24” max turning length, 10 station turret, hydraulic collet chuck, 8” hydraulic 3-jaw chuck, speeds to 5,000 rpm, milling spindle speeds to 3,000 rpm, 2” bar capacity, parts catcher, coolant, chip conveyor, 208-230v/3ph/60hz, s/n 63848

CNC VERTICAL MACHINING CENTER

  • MEGAMILL VMC3060 vertical machining center with MITSUBISHI MELDAS CNC control, 67” x 23.5” t-slot table, travels: x-60”, y-60”, z-60”, speeds to 12,000 rpm, 24 station ATC, high-pressure through spindle coolant with paper filtration, 220v/3ph/60hz, s/n 200512110

CNC VERTICAL MILLING MACHINE

  • KBC TCM-1000 CNC vertical milling machine with CENTROID M-15 CNC control, 54” x 12” table, speeds to 3525b rpm, 40 taper spindle, 5 hp spindle drive, coolant, 230-460v/3ph/60hz, s/n 331112

CONVENTIONAL MACHINE TOOLS

  • MAXIMART (2005) R-0545H ALROLL 5’ X 3/16” capacity power bending rolls with 6” diameter rolls, hydraulic guides, foot pedal & t-stand controls, 600v/3ph/60hz, s/n 4704
  • KINGSLAND J21 66-ton mechanical iron worker, 575v/3ph/60hz, s/n 160376
  • RICHMOND HERALD 600 4’ radial arm drill with speeds to 2,000 rpm, 9” column, 21” x 16” x 10” t-slot box table (may be sold separately), s/n 101/C020/0031
  • EX-CELL-O 602 vertical milling machine with 3 hp spindle motor with retrofit TECO SM50 variable frequency drive, 36” x 9” t-slot table, 230v/1ph/60hz, s/n 6023490
  • TARNOW TUJ50 X 3000 gap bed engine lathe with 23” swing over bed, 31” swing in the gap, 120” between centers, 16” 4-jaw chuck, 2” spindle bore, speeds to 1,800 rpm, in/mm threading, steady rest, tailstock, 575v/3ph/60hz, s/n 2351
  • GISHOLT NO.3 mechanical turret lathe with 20” swing over bed, 6 station turret, 2” spindle bore, in/mm threading, 8” 3-jaw chuck, s/n 717-59
  • HYD-MECH S-20A horizontal bandsaw with hydraulic shuttle bundling vise, hydraulic clamping, miter capabilities, out-feed conveyor, 575v/3ph/60hz, s/n 10685093
  • DEWALT 535 radial arm saw with 28” throat, 12” blade, s/n 343668
  • BROWN BOGGS 36 eccentric c-frame punch press with retrofit ALLEN-BRADLEY MICRO810 digital microprocessor control, 27” x 14” bed size, 120v/1ph/60hz, s/n R048
  • WEBER hydraulic h-frame shop press, s/n n/a
  • HAVLIK OBI mechanical punch press with 24” x 35.5” bed size, 18” x 11” ram size, 575v/3ph/60hz, s/n n/a
  • COLLOCRIMP T-400 hydraulic hose crimper with dies, stand and fittings, 120/1ph/60hz, s/n n/a
  • ENERPAC hydraulic hose crimper with air/hydraulic power pack, s/n n/a
  • ESAB HELIARC 252 AC/DC TIG welder with MILLER COOLMATE 1 chiller, cables and gun, s/n TL-J103015
  • ESAB HELIARC 352 AC/DC TIG welder with LINCOLN ELECTRIC COOL-ARC 40 chiller, cables and gun, s/n TD-1731016
  • HOBART MEGA-MIG 450-RVS MIG welder with HOBART 2410 wirefeed, cables and gun, s/n 91NS01093
  • LINCOLN ELECTRIC 350MP POWERMIG MIG welder with cables and gun, s/n U1110600663
  • MILLER CP-200 MIG welder with MILLER MILLERMATIC S-54E wirefeed, cables and gun, s/n CT121879
  • MILLER CP-200 MIG welder with MILLER wirefeed and cables, s/n JE833561
  • HYPERTHERM POWERMAX 1000 G3 SERIES plasma cutter, s/n 1000-036506
  • NEDERMAN 1 HP portable fume extractor, 120v/1ph/60hz, s/n n/a
  • CUSTOM hydraulic pipe & conduit bender, s/n n/a
  • RIDGID 300 pipe threader with cutter and reamer, s/n n/a

ROLLING STOCK

  • TOYOTA FBCA30 5,500 LBS capacity electric forklift with 158” max vertical reach, 3-stage mast, cushion tires, third valve, approx. 2947 hours recorded on meter at the time of listing, 36-volt battery, s/n 10347
  • YALE GLP 060TFNUAV081SR LPG counterbalance forklift with 6,000 lbs capacity, 2-stage mast, 114” max vertical reach, side-shift, cushion tires, heated cab, 14,225 hours (recorded on meter at time of listing), s/n E177B10589T
  • CLARK C500-45 LPG counterbalance forklift with 5,000 lbs capacity, 3-stage mast, 189” max vertical reach, cushion tires, 3,725 hours (recorded on meter at time of listing), s/n 355-206-1208
  • ECOMOMY 2046 24v electric scissor lift with 1,500 LBS capacity, 20’ maximum vertical lift, s/n 82433
  • GARAGA SOLFAVIDOOR 16’ X 14’ complete overhead garage door kit, s/n n/a

ALSO:

  • LARGE SELECTION OF AMADA turret punch tooling including auto-indexing tooling, conventional punches and dies; selection of press brake dies; live milling holders; turning tool holders; (40+) CAT 40 tool holders; (5+) KURT 6” machine vises; VOLKSWAGEN JETTS TDI sedan manual; factory equipment including MILWAUKEE mag base drill, electric power tools, custom pipe and conduit benders, 2-stage piston type compressor with refrigerated air dryer and receiver tank; shop tables, work benches, sheet metal racking, cantilever racking, lockers, file cabinets and MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN CAD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 
*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. Contact info@corpassets.com for details. The Buyer's Premium does not apply to posted rigging fees.