Large Papermill Liquidation

Paper Machine & Major Components Unique Opportunity!

 

Date

Ongoing

Start Time

N/A

Inspection

To set up an inspection or request further information, please contact us at 416-962-9600.

Removal

N/A
 

Location

Quebec, Canada

Industry

Pulp & Paper
 


 

Corporate Assets Inc. is excited to present a new and unique pulp & paper opportunity. Several major assets of a substantial 450 TPD capacity groundwood specialty and newsprint papermill, located along a major corridor in the province of Quebec, are being offered for sale by private negotiation. Please contact us for further information on this great opportunity!
 

Featured Assets Include: DOMINION ENGINEERING 41C-00 HARRICANA left hand drive, high speed, groundwood specialty paper and newsprint machine with up to 3500 FPM normal operating speed, 4000 FPM max balance speed, 464 TPD @ 3250 FPM rated normal operating capacity, 637 TPD @ 3850 FPM max theoretical capacity, 48.8 GSM basis weight, 326” wire width, 304” reel trim, 300” winder trim; (9) HYMAC-JYLHA HSD 6056/54 TMP plate type thermo-mechanical pulping refiners; (9) NASH CL9002G liquid ring single stage vacuum pumps; (3) NASH CL6001G liquid ring single stage vacuum pumps; COMPLETE LAMB 21E8E-5 paper roll handling and packaging system!

300” HIGH SPEED PAPER MACHINE

DOMINION ENGINEERING 41C-00 HARRICANA left hand drive, high speed, groundwood specialty paper and newsprint machine with up to 3500 FPM normal operating speed, 4000 FPM max balance speed, 464 TPD @ 3250 FPM rated normal operating capacity, 637 TPD @ 3850 FPM max theoretical capacity, 48.8 GSM basis weight, 326” wire width, 304” reel trim, 300” winder trim, s/n 00002-278 41C-00 consisting of:

  • DOMINION ENGINEERING DYNAFLO hydraulic headbox with 318” slice width, 4000 FPM design speed, rectangular retractable header with 28” diameter inlet and 10” diameter outlet, slice, showers and instrumentation, s/n 41C-01
  • DOMINION ENGINEERING PAPRIFORMER TWIN WIRE FORMER with 326” wire width, 68’ wire length, 4000 FPM design speed, 36.75” diameter x 330” face breast roll, 48” diameter forming roll, (9) 330” face wire rolls, automatic wire guide, oscillating showers, power actuated reversible tail cutter, stainless steel save-alls, s/n 41C-02
  • DOMINION ENGINEERING 48” diameter x 322” face couch roll with two compartment stainless steel suction box, s/n 41C-03
  • DOMINION ENGINEERING TRIPLE NIP press with 450 PLI tension double felted 1st section, 500 PLI tension single felted suction press 2nd section, 600 PLI tension high load grooved press 3rd section, no-draw arrangement design, 32” diameter x 328” face suction roll, 52” diameter x 329” face granite roll, 44” diameter x 332” face grooved roll, 53” diameter x 322” face 1st&2nd press suction roll with 3-compartment suction box, (18) wet felt rolls, (1) wormed felt roll, (1) stretcher felt roll, (1) felt tension roll, (6) felt conditioners, (12) showers, (5) roll doctors, (6) felt guides, s/n 41E-01
  • DOMINION ENGINEERING 1ST DRYER section with (1) 42” diameter x 321” face BABY steam dryer with 75 PSIG design pressure, 11”x15” front head mounted manhole cover, rear steam supply, front condensate removal; (8) 72” diameter x 321” face steam dryers with 75 PSIG design pressure, 11”x15” front head mounted manhole cover, rear steam supply, front condensate removal; (7) 24” felt rolls; (1) felt stretcher; short draw design; ROSS steam hood;  s/n 41G-08
  • DOMINION ENGINEERING 2ND DRYER section with (8) 72” diameter x 321” face steam dryers with 75 PSIG design pressure, 11”x15” front head mounted manhole cover, rear steam supply, front condensate removal; (7) 24” felt rolls; (1) felt stretcher; ROSS steam hood; s/n 41G-03
  • DOMINION ENGINEERING 3RD DRYER section with (12) 72” diameter x 321” face steam dryers with 75 PSIG design pressure, 11”x15” front head mounted manhole cover, rear steam supply, front condensate removal; (26) 24” felt rolls; (2) felt stretchers; ROSS steam hood; s/n 41G-04
  • DOMINION ENGINEERING 4th DRYER section with (12) 72” diameter x 321” face steam dryers with 75 PSIG design pressure, 11”x15” front head mounted manhole cover, rear steam supply, front condensate removal; (26) 24” felt rolls; (2) felt stretchers; ROSS steam hood; s/n 41G-05
  • DOMINION ENGINEERING 2-ROLL BREAKER STACK with 28” diameter x 316” face chilled water top roll; 34” diameter x 316” face chilled water bottom roll; 20” diameter x 321” paper guide roll; ROSS steam hood; s/n 41H-01
  • DOMINION ENGINEERING 5th DRYER section with (5) 72” diameter x 321” face steam dryers with 75 PSIG design pressure, 11”x15” front head mounted manhole cover, rear steam supply, front condensate removal; (1) 72” diameter x 321” face sweat dryer roll with oscillating doctor; (17) 24” felt rolls; (2) felt stretchers; motorized tail cutter, ROSS steam hood; s/n 41G-06
  • DOMINION ENGINEERING 6-ROLL CALENDER STACK with open sided design, 4000 FPM design speed, (1) 34” diameter x 316” face chilled bottom roll; (2) 28” diameter x 316” face intermediate heat transfer rolls; (2) 28” diameter x 316” face upper load/relief rolls; (1) 28” diameter x 316” face queen heat transfer roll; hot/cold water system; s/n 41J-00
  • DOMINION ENGINEERING CONSTANT TENSION TYPE REEL with 4000 FPM design speed, 110” max paper roll diameter, 48” diameter x 312” face water cooled reel drum, 21.25” x 312” spreader roll, reel bars, transfer arms, parent roll storage and transfer system, s/n 41K-01
  • DOMINION ENGINEERING SHAFTLESS TYPE SLITTER WINDER with 8500 FPM design speed; 60” max shipping roll diameter @ 300” trim width; 28” diameter x 304” face rear drum; 28” diameter x 304” face grooved front drum; 22” diameter x 306” face lead roll, 12.5” diameter rider roll; 9” diameter top and 10” diameter bottom fixed angle shear cut slitters with 11.25” min slit width, 8.5” min face-to-face slit width; core holder; roll ejector system; regenerative braking system; s/n 41L-00
  • GENERAL ELECTRIC CONTROL CONSOLES with machine interface modules, touch screen PLC controls, stainless steel cabinets, s/n n/a
  • ABB (RETROFIT 2020) ACCURAY 1190 SMART PLATFORM scanner with WINDOWS PC based control and data acquisition system, retrofit with smart basis weight, caliper and moisture sensor modules, s/n 503154 (radiation source already removed – not included)
  • COGNEX (2011) MCSU digital dynamic optical web inspection system with MCSU SMART VIEW WINDOWS PC based control and data acquisition system with dynamic real time defect locating, classification and reporting capability, currently in (8) CCD LINESCAN high speed digital camera scanning beam array configuration, LED light source; tachometer; encoders; server cabinet; all high speed fiberoptic infrastructure; machine control integration; s/n n/a

THERMO-MECHANICAL PULPING TMP REFINERS

  • HYMAC-JYLHA (REBUILT – ANDRITZ 2015) HSD 6056/54 TMP plate type thermo-mechanical pulping refiner with 53.93” disc diameter, speeds to 1800 RPM, 8,500 HP rating, pressurized steam separator, ribbon screw feeder, electro-mechanical plate positioning, instrumentation, vibration monitor, plate protection system, s/n 5354 (26B-38)
  • HYMAC-JYLHA (REBUILT – ANDRITZ 2014) HSD 6056 TMP plate type thermo-mechanical pulping refiner with 53.93” disc diameter, speeds to 1800 RPM, 8,500 HP rating, pressurized steam separator, ribbon screw feeder, electro-mechanical plate positioning, instrumentation, vibration monitor, plate protection system, s/n 5351 (26E-03)
  • HYMAC-JYLHA (REBUILT – VALMET 2017) HSD 6056 TMP plate type thermo-mechanical pulping refiner with 53.93” disc diameter, speeds to 1800 RPM, 8,500 HP rating, pressurized steam separator, ribbon screw feeder, electro-mechanical plate positioning, instrumentation, vibration monitor, plate protection system, s/n 5353
  • HYMAC-JYLHA (REBUILT – KVAERNER) HSD 6056 TMP plate type thermo-mechanical pulping refiner with 53.93” disc diameter, speeds to 1800 RPM, 8,500 HP rating, pressurized steam separator, ribbon screw feeder, electro-mechanical plate positioning, instrumentation, vibration monitor, plate protection system, s/n 5356
  • HYMAC-JYLHA (REBUILT – KVAERNER) HSD 6056 TMP plate type thermo-mechanical pulping refiner with 53.93” disc diameter, speeds to 1800 RPM, 8,500 HP rating, pressurized steam separator, ribbon screw feeder, electro-mechanical plate positioning, instrumentation, vibration monitor, plate protection system, s/n 5349
  • HYMAC-JYLHA HSD 6056 TMP plate type thermo-mechanical pulping refiner with 53.93” disc diameter, speeds to 1800 RPM, 8,500 HP rating, pressurized steam separator, ribbon screw feeder, electro-mechanical plate positioning, instrumentation, vibration monitor, plate protection system, s/n n/a (26E-27)
  • HYMAC-JYLHA HSD 58A TMP plate type thermo-mechanical pulping refiner with 53.93” disc diameter, speeds to 1800 RPM, 8,500 HP rating, pressurized steam separator, ribbon screw feeder, electro-mechanical plate positioning, instrumentation, vibration monitor, plate protection system, s/n 5915
  • HYMAC-JYLHA HSD 6056 TMP plate type thermo-mechanical pulping refiner with 53.93” disc diameter, speeds to 1800 RPM, 8,500 HP rating, pressurized steam separator, ribbon screw feeder, electro-mechanical plate positioning, instrumentation, vibration monitor, plate protection system, s/n 5348
  • HYMAC-JYLHA (REBUILT – ANDRITZ 2014) HSD 6056 TMP plate type thermo-mechanical pulping refiner with 53.93” disc diameter, speeds to 1800 RPM, 8,500 HP rating, pressurized steam separator, ribbon screw feeder, electro-mechanical plate positioning, instrumentation, vibration monitor, plate protection system, s/n 5352

CENTRIFUGAL VACUUM PUMPS

  • NASH CL9002G liquid ring single stage vacuum pump with 11,250 CFM @ 277 rpm rated capacity, NASH integrated gear drive with 450 hp @ 1800 rpm rated input, s/n MCO01937 (41-Q04)
  • NASH CL9002G liquid ring single stage vacuum pump with 11,250 CFM @ 277 rpm rated capacity, NASH integrated gear drive with 450 hp @ 1800 rpm rated input, s/n MCO0601 (41-Q05)
  • NASH CL9002G liquid ring single stage vacuum pump with 11,250 CFM @ 277 rpm rated capacity, NASH integrated gear drive with 450 hp @ 1800 rpm rated input, s/n 81C0057 (41-Q06)
  • NASH CL9002G liquid ring single stage vacuum pump with 11,250 CFM @ 277 rpm rated capacity, NASH integrated gear drive with 450 hp @ 1800 rpm rated input, s/n 97BH1586 (41-Q07)
  • NASH CL9002G liquid ring single stage vacuum pump with 11,250 CFM @ 277 rpm rated capacity, NASH integrated gear drive with 450 hp @ 1800 rpm rated input, s/n 81C0055 (41-Q08)
  • NASH CL9002G liquid ring single stage vacuum pump with 11,250 CFM @ 277 rpm rated capacity, NASH integrated gear drive with 450 hp @ 1800 rpm rated input, s/n 81C0056 (41-Q09)
  • NASH CL9002G liquid ring single stage vacuum pump with 11,250 CFM @ 277 rpm rated capacity, NASH integrated gear drive with 450 hp @ 1800 rpm rated input, s/n 01M45409 (41-Q11)
  • NASH CL6001G liquid ring single stage vacuum pump with 7,200 CFM @ 327 rpm rated capacity, NASH integrated gear drive with 300 hp @ 1770 rpm rated input, s/n 81C0057 (41-Q10)
  • NASH CL6001G liquid ring single stage vacuum pump with 7,200 CFM @ 327 rpm rated capacity, NASH integrated gear drive with 300 hp @ 1770 rpm rated input, s/n 81C0058 (41-Q12)
  • NASH CL6001G liquid ring single stage vacuum pump with 6,600 CFM @ 300 rpm rated capacity, NASH integrated gear drive with 300 hp @ 1770 rpm rated input, s/n MC01855 (41-Q13)
  • NASH CL6001G liquid ring single stage vacuum pump with 6,600 CFM @ 300 rpm rated capacity, NASH integrated gear drive with 300 hp @ 1770 rpm rated input, s/n 97BH1658 (41-Q14)

FINISHING & PACKAGING SYSTEM

  • LAMB 21E8E-5 paper roll handling and packaging system with 28”-50” roll diameter handling capacity, 28”-96” roll length handling capacity, max 105 rolls/hour design capacity, consisting of: roll transfer system with conveyor and lowering unit; pallet loading and handling system; arm lifter and roll placing system; weigh station; wrapping station; strapping station; labeling system; out-feed and exit conveyor; control consoles and machine integration; s/n n/a

ONGOING LIQUIDATION

Papermill 2025 Liquidation

Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.
DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS
MODALITÉS ET CONDITIONS DE VENTE

Payment

 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.
Download Full Payment Information
Download Buyer Deposit Form
CAD Wire Transfer Details
USD Wire Transfer Details
Interac E-Transfer Payment Instructions

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.
 
Please read our Full Terms & Conditions for Removal Requirements

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

Rigger Release Authorization Form

 

Sample of 'Certificate of Insurance' or 'CI'

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact [email protected] to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
[email protected]
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
[email protected]
www.montyinternational.com		 Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
[email protected] or [email protected]
www.omegacb.com