Exceptionally Late & Multi-Axis CNC Machining Facility
Tuesday, November 16, 2021
10:30 AM EST
BY APPOINTMENT ONLY. Please email firstname.lastname@example.org to arrange a date and time.
All assets must be removed no later than Tuesday, December 7 BY APPOINTMENT ONLY. Please email email@example.com to arrange.
Corporate Assets Inc. is pleased to announce its recent acquisition of the assets of Engine-Tech—a high-end custom parts manufacturer making aftermarket turbos for performance racing jet skis. This shop is in absolute mint condition with very low usage and only worked with aluminum. Everything in the facility has been exceptionally maintained by the former owner. Mark your calendars and don’t miss out on this upcoming event!
FEATURING: GF MIKRON (2020) MILL E 500 U 5-axis CNC vertical machining center w/ 7-Pallet APC magazine, 20,000 RPM, etc. (ONLY 576 CUTTING HOURS - $450K USD NEW); MIKRON (2006) HSM 400 U 5-axis CNC vertical machining center w/ 18-Pallet APC magazine, 42,000 RPM etc. (ONLY 1831 CUTTING HOURS); MAZAK (SEPT 2017) INTEGREX i-100 ST 9-axis CNC multi-tasking center (LOADED WITH OPTIONS – ONLY 306 MAIN SPINDLE HOURS - $425K USD NEW); HAAS VFOE CNC 5-axis vertical machining center; HAAS MINIMILL CNC vertical machining center; EMCO EMCOTURN 332MC opposed spindle & twin turret CNC live milling and turning center; HAAS HL-2 CNC turning center; MITSUBISHI FX20I CNC wire type EDM; BROWN & SHARPE MICRO-HITE DCC coordinate measuring machine; REGO-FIX BMT200-2-S.50 P digital precision tool balancer; ATLAS COPCO (2012) GA 7VSD FF combination 10 HP rotary screw type air compressor / dryer; KAESER (2008) 5C SIGMA AIRTOWER 5 HP rotary screw type air compressor / refrigerated air dryer; HUSKY VT631402AJ 5HP tank mounted air compressor; DIGITAL PRO JPS-100A digital ultrasonic parts cleaner; ALSO FEATURING: (100+) HSK-A63 milling & turning tool holders, (75+) CAT 40 tool holders, CAPTO & VDI turning tool holders, (30+) SYSTEM 3R MACRO MAGNUM 6.14” diameter pallets, large selection of late model & high end perishable tooling, inspection equipment, SINO EXTRA 3D printer, LISTA type tool cabinets, production support related assets, factory support equipment & MORE!
EXCLUSIVE RIGGER FOR THIS SALE:
*For everyone’s safety removal at this site is conducted strictly by appointment only
Lots with a rigging fee listed in the description must contact DON@TEAMCIS.CA to set their pick-up appointments upon payment in full.
CANADIAN INDUSTRIAL SERVICES
Mobile: (905) 376-0233
Phone: (905) 372-8333
Lots without a rigging fee listed in the description must contact firstname.lastname@example.org to set their pick-up appointments upon payment in full.
5-AXIS HIGH SPEED CNC MACHINING CENTERS
- GF MIKRON (2020) MILL E 500 U 5-axis CNC vertical machining center with HEIDENHAIN TNC 640 CNC control, 19.68” diameter rotary table, travels: X - 19.68”, Y - 17.71”, Z - 15.74”, B – (-65/+120) degrees, C – (n x 360) degrees, spindle speeds to 20,000 rpm, 30/45 hp spindle drive, HSK-A63 spindle taper, 60-station ATC, 7-pallet APC magazine with 11” x 11” SYSTEM 3R pallets, RENISHAW OMI-2 optical machine interface, RENISHAW OMP40-2 touch probe, BLUM laser tool measuring system, 290 PSI high pressure coolant thru spindle with paper belt chip filtration, chip conveyor, refrigerated spindle chiller, 1060 hours power on time, 576 hours spindle time recorded on meter at time of listing, 400v/3ph/50-60hz, s/n 3048195
- MIKRON (2006) HSM 400 U 5-axis CNC vertical machining center with HEIDENHAIN iTNC 530 CNC control, tilting rotary table with built in 3R MACRO MAGNUM pallet chuck system, 3R MACRO MAGNUM 6.14” diameter pallets, travels: X - 15.74”, Y - 9.44”, Z - 13.77”, B- (-110/+110 deg), C – (n-360) degrees, spindle speeds to 42,000rpm, HSK-E40 spindle taper, 36 station ATC, M&H IRP32.00 touch probe, 18-pallet APC magazine with 3R MACRO MAGNUM pallets, coolant, chip conveyor, spindle chiller, 12835 hours power on time, 1831 hours spindle time recorded on meter at time of listing, 400v/3ph/50-60hz, s/n 107.87.00.142
CNC MULTI-TASKING TURNING AND MACHINING CENTER
- MAZAK (SEPT 2017) INTEGREX i-100 ST 9-axis CNC multi-tasking center with MAZATROL SMOOTHX touchscreen CNC control; 20.87” maximum swing over cross slide; 19.67” maximum upper turret machining diameter; 15.7” maximum lower turret machining diameter; 33.62” maximum machining length; travels: X1 – 17.72”, Y – 8.27”, Z1 – 35.59”, X2 – 8.66”, Z2 – 35.55”, W – 35.55”, B – (-30/+210) degrees, C1/C2 – main & sub spindle indexing in 0.0001 degree increments; 2.99” big bore main spindle (factory installed option) with speeds to 6000 rpm, KITAGAWA BB208 (factory installed option) 8.26” hydraulic chuck, 15hp main spindle drive, standard sub spindle with speeds to 6000 rpm, KITAGAWA B206 6.65” hydraulic chuck, 2.4” sub spindle bore, 15hp sub spindle drive; 12,000 rpm milling spindle with HSK-A63 taper, 36 station ATC, 9-position lower drum type turret with standard tooling, RENISHAW RMI-Q optical machine interface, RENISHAW RMP600 touch probe, full coolant package with 200 PSI high pressure thru milling spindle coolant (factory installed option), chip conveyor, automatic opening and closing front door (factory installed option); robot interface pre-wiring (factory installed option); 2950 hours power on time, 306 hours main spindle time, 25 hours sub spindle time, 493 hours milling spindle time, all recorded on meter at time of listing; 400-200v/3ph/50-60hz; s/n 283201
5-AXIS CNC VERTICAL MACHINING CENTER
- HAAS VFOE CNC 5-axis vertical machining center with HAAS CNC control, 14”x36” table, travels X – 30”, Y – 16”, Z – 20”, A – 360 degrees, B – 360 degrees, speeds to 7,500 rpm, 20hp spindle drive, CAT40 taper, 24-station ATC, HAAS trunnion type fourth and fifth axis rotary table (may be sold separately), programmable coolant nozzle, RENISHAW touch probe system, chip auger, 208-240v/3ph/50-60hz, S/N 20684
CNC VERTICAL MACHINING CENTER
- HAAS MINIMILL CNC vertical machining center with HAAS CNC control, 12”x36” table, travels X -16”, Y - 12” Z - 10”, speeds to 6,000 rpm, 7.5hp spindle drive, CAT40 taper, 10-station ATC, coolant, chip tray, 208-240v/3ph/50-60hz, s/n 29173
CNC TURNING & LIVE MILLING CENTER
- EMCO EMCOTURN 332MC opposed spindle & twin turret CNC live milling and turning center with SIEMENS SINUMERIK 840D CNC control, 5.51” max turning diameter, 8.66” max turning length, travels X1-6.3”, Z1 – 20.07”, X2-5.50”, Z2 – 20.07”, C – 360 degrees in 0.001 degree increments, speeds to 8000 rpm main spindle, 7000 rpm sub spindle, 12 station upper turret with VDI holders and live milling, milling spindle speeds to 6000 rpm, 12 station lower turret with VDI holders, coolant chip conveyor, 400v/3ph/50-60hz, s/n R2DV021EC R2D NO601
CNC TURNING CENTER
- HAAS HL-2 CNC turning center with HAAS CNC control, 20” swing, 10” max turning diameter, 20” max turning length, travels X – 8.6”, Z – 20”, speeds to 3750 rpm, 15 hp spindle drive, 8” hydraulic chuck, hydraulic tailstock, coolant, chip conveyor, 208-230v/3ph/60hz, s/n 61903
- MITSUBISHI FX20I CNC wire type EDM with MITSUBISHI CNC control, 43” x 34” x 22” tank, dielectric tank, filtration, 220v/3ph/50hz, s/n 206x07x
- BROWN & SHARPE MICRO-HITE DCC coordinate measuring machine with PC-DMIS PRO 3.7 WINDOWS PC based control and data acquisition software, 17”x19”x15” measuring envelope, TESA TESASTAR touch probe, pendant control, 120v/1ph/60hz, s/n 0605-1929
PRECISION TOOL BALANCER
- REGO-FIX BMT200-2-S.50 P digital precision tool balancer, s/n 3.80**2.1602
- ATLAS COPCO (2012) GA 7VSD FF combination 10 HP rotary screw type air compressor / dryer with 40,500 running hours recorded on meter at the time of listing, 230-460v/3ph/60hz, s/n 8153008142
- KAESER (2008) 5C SIGMA AIRTOWER 5 HP rotary screw type air compressor / refrigerated air dryer with 21 cfm @ 125 psi capacity, 7651 hours (recorded on meter at time of listing), 230v/3ph/60hz, S/N 1023
- HUSKY VT631402AJ 5HP tank mounted conventional air compressor with 10 scfm @ 90 psi capacity, 60-gal tank, 240v/1ph/60hz, s/n 92435
- DIGITAL PRO JPS-100A digital ultrasonic parts cleaner with 30-liter capacity tank, 600w ultrasonic power, 800w heating element, 120v/1ph/60hz, s/n n/a
- (100+) HSK-A63 milling and turning tool holders; (75+) CAT40 tool holders; CAPTO and VDI turning tool holders; (30+) SYSTEM 3R MACRO MAGNUM 6.14” diameter pallets; large selection of perishable tooling comprising carbide and conventional end mills, drills, taps, reamers, carbide insert boring bars and cutters; inspection equipment, micrometers, Vernier calipers and height gauges, SINO LANG laser parts engraver, SINO EXTRA 3D printer; hand tools, power tools, vises, fixtures, angle plates and machine tool accessories; workbenches, LISTA type tool cabinets, rolling tool boxes and MORE!