Diamond F.C. Inc.

Complete Machining & Fabricating Facility Closure

 

Date

Thursday, November 4, 2021

Start Time

10:30 AM EDT

Inspection

BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange a date and time.

Removal

All assets must be removed no later than Thursday, November 25 BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange.

Industry

Fabricating | Machining
 

MACHINING
 

FEATURING: TOS W100A, table type horizontal boring mill w/ HEIDENHAIN DROs; MAZAK (2009) NEXUS VCN 510C-II, high speed CNC twin pallet vertical machining center with 4th axis; QUASER (2011) MV154, high speed CNC vertical machining center; OMAX 80160, 90” x 174” bridge type CNC waterjet; COAST ONE (2008) CONE 900, electric servo 25 ton press brake w/ assorted brake dies; PROTH (2014) PSGS-4080, 16” x 32” hydraulic surface grinder; YSD (2007) FABMASTER PPT 150-12, 135 ton x 12’ CNC press brake w/ assorted brake dies; LINCOLN PRECISION TIG 275, digital TIG welder; MAGNUM CUT (2016) 4V, vertical milling machine w/ power feed, DRO & drawbar; MAGNUM CUT (2014) 4V, vertical milling machine w/ power feed & DRO; MAGNUM CUT (2013) 4V, vertical milling machine w/ power feed, DRO & drawbar; PHOEBUS (2012) PBM-GEVS500A, vertical milling machine w/ power feed, DRO & drawbar; MAGNUM CUT (2008) 3VS, vertical milling machine w/ power feed, DRO & drawbar; SIRCO PA20-4, 20” x 126” capacity engine lathe; TTMC (2008) CM6241 x 1000, engine lathe; MORI SEIKI SL-2H, CNC turning center; HOWA SANGYO 1000, engine lathe; BAXTER (2008) 360SA, horizontal band saw; (2) O’BRIEN 1000lb capacity jib cranes; COMPAIR L18, 25HP air compressor; PARKER refrigerated air dryer; BURR BENCH vibratory metal finisher; CLARK 30CL, 5000lb LPG forklift; ANVER 1500lb vacuum sheet lifter; WELDMATE BP-2, welding positioner; LARGE ASSORTMENT OF: high speed tooling and perishables, press brake dies, KURT vices, useable raw material inventory, FORD F-150 pick up truck, machining & fabricating support equipment, factory support equipment & MORE!

THE EXCLUSIVE RIGGER FOR THIS SALE IS:

EX TRANS CARGO INC.
1.800.340.5644 | 514.895.5644
Service Area: Canada, U.S.A. & International
please contact: Kerry-Ann Labranche
klabranche@extranscargo.com
www.extranscargo.com

*For everyone’s safety removal at this site is conducted strictly by appointment only. Buyers can contact the mover directly at 1-800-340-5644 or klabranche@extranscargo.com to set their pick-up appointments upon payment in full.

HIGH SPEED CNC VERTICAL MACHINING CENTERS

  • MAZAK (2009) NEXUS VCN 510C-II high speed CNC twin pallet vertical machining center with MAZAK MAZITROL MATRIX NEXUS CNC control, (2) 51”x21.5” tables, travels: X – 41.34”, Y – 20.08”, Z – 20.08”, 25” max. distance spindle nose to table top, speeds to 12,000 RPM, CAT 40 taper, 48 station ATC, coolant, chip conveyor, pallet changer, RENISHAW OMI-2T optical machine interface, MAZAK 4th axis turntable (may be sold separately), s/n: 217557
  • QUASER (2011) MV154C high speed CNC vertical machining center with FANUC SERIES Oi-MD CNC control, 35.5”x22.5” table, travels: X – 30”, Y – 20.8”, Z – 22”, speeds to 10,000 RPM, CAT 40 taper, 30 station ATC, coolant, chip auger, RENISHAW TS2-7R tool setting probe, 1,357.5 hrs (recorded on meter at time of listing), s/n: 120I111240

CNC ABRASIVE WATERJET CUTTING MACHINE

  • OMAX MODEL 80160 bridge-type CNC abrasive waterjet cutting machine with OMAX CNC control, 174”x90” cutting table, travels: X - 168”, Y – 80”, 180 IPH cutting speed, s/n: E511671

CNC TURNING CENTER

  • MORI-SEIKI SL-2H CNC turning center with FANUC SYSTEM 11T CNC control, 10” 3 jaw chuck, 22” swing over bed, 16” max. turning length, 2.5” spindle bore, 12 station turret, speeds to 4000 RPM, coolant, chip conveyor, s/n: 2076

HORIZONTAL BORING MILL

  • TOS W100A table-type horizontal boring mill with 4” spindle, 48”x48” power rotary table, 44” vertical travel, 68.89” cross travel, 35.43” spindle travel, 50 taper spindle, speeds to 900 RPM, (2) HEIDENHAIN 2 axis DROs, s/n: 5103

CNC HYDRAULIC PRESS BRAKE

  • YSD (2007) FABMASTER PPT150-12 CNC hydraulic press brake with DELEM DA-41 CNC control, 135 ton capacity, 157” max. bending length, 124” between housings, 5.11” stroke, 12.2” daylight, power back gauge, s/n: 7417

SERVO-ELECTRIC PRESS BRAKE

  • COASTONE OY (2008) CONE 900 servo-electric press brake with 25 ton capacity, 31.5” max. bending length, PLC touch screen control, FIESSLER safety light curtains, s/n: 2008118

CONVENTIONAL MACHINE TOOLS

  • PROTH (2014) PSGS-4080AHR surface grinder with 32”x16” magnetic chuck, incremental downfeed, 12” wheel, coolant, paper band coolant filtration system, s/n: EB4106
  • BAXTER (2008) 360-SA semi-automatic horizontal band saw with 14”x19” cutting capacity, 2 HP, 13.5’x1” blade size, s/n: 5925
  • MAGNUM CUT (2016) MODEL 4V vertical milling machine with 54”x10” table, speeds to 3600 RPM, NT40 taper, power feed, TORQUE-RITE power draw bar, 5 HP, FAGOR 2 axis DRO, s/n: 160428
  • MAGNUM CUT (2014) MODEL 4V vertical milling machine with 54”x10” table, speeds to 3600 RPM, NT40 taper, power feed, 5 HP, FAGOR 2 axis DRO, s/n: 141372
  • MAGNUM CUT (2013) MODEL 4V vertical milling machine with 54”x10” table, speeds to 3600 RPM, NT40 taper, power feed, TORQUE-RITE power draw bar, 5 HP, FAGOR 2 axis DRO, s/n: 130546
  • MAGNUM CUT (2008) MODEL 3VS vertical milling machine with 54”x10” table, speeds to 4200 RPM, R8 taper, power feed, TORQUE-RITE power draw bar, 5 HP, FAGOR 2 axis DRO, s/n: 083499
  • PHOEBUS (2012) PBM-GEVS5004 vertical milling machine with 58”x14.5” table, speeds to 3600 RPM, TORQUE-RITE power draw bar, FAGOR 3 axis DRO, s/n: 905
  • SIRCO PA20-4 gap bed engine lathe with 20” swing over bed, 126” between centers, 4” spindle bore, speeds to 1500 RPM, inch/metric threading, steady rest, 12” 3 jaw chuck, quick change tool post, s/n: 03476430
  • HOWA SANGYO MODEL 1000 engine lathe with 20” swing over bed, 40” between centers, 2” spindle bore, speeds to 1500 RPM, inch/metric threading, 12” 3 jaw chuck, FAGOR 2 axis DRO, s/n: 10158
  • TTMC CM6241X1000 gap bed engine lathe with 16” swing over bed, 40” between centers, 2” spindle bore, speeds to 1800 RPM, inch/metric threading, steady rests, 10” 3 jaw chuck, SINO 2 axis DRO, s/n: n/a
  • DUTCH CPO-350SA/LT 14” cold cut saw, s/n: n/a
  • MAKINA 48” bending tri-rolls with 4” diameter, s/n: 5103
  • 50 ton H-frame hydraulic shop press

WELDING EQUIPMENT

  • COMPAIR L18 25 HP rotary screw air compressor, s/n: n/a
  • PARKER MODEL 40211 refrigerated air dryer, s/n: n/a
  • BURR BENCH MODEL 2016 vibratory finishing machine, s/n: n/a
  • CRAFTEX 1 HP portable bag-type dust collector

MATERIAL HANDLING EQUIPMENT

  • CLARK 30CL LPG forklift with 5600 lb. capacity, 189” max. lift height, 3 stage mast, side shift, multi-surface tires, 9216.5 hrs (recorded on meter at time of listing), s/n: C232L-0292-9582
  • MFG. UNKNOWN 159”x312”x129”H free standing bolt-together gantry system with 2200 lb. capacity, 312” run, 159” span, DEMAG 2000 lb. capacity electric hoist
  • O’BRIEN free standing jib arm with 1000 lb. capacity, 130” span, 120” height under beam, SWL ½ ton capacity electric hoist, s/n: 2829
  • O’BRIEN free standing jib arm with ½ ton capacity, 180” span, 144” height under beam, YALE ½ ton capacity electric hoist
  • DRESSOR free standing beam hoist with 1 ton capacity, approx. 300” span, approx. 192” height under beam, 1 ton capacity electric hoist
  • ANVER VPF-57-AC VACPACK 6 pad vacuum sheet lifter with 1500 lb. capacity

FACTORY SUPPORT EQUIPMENT

  • COMPAIR L18 25 HP rotary screw air compressor, s/n: n/a
  • PARKER MODEL 40211 refrigerated air dryer, s/n: n/a
  • BURR BENCH MODEL 2016 vibratory finishing machine, s/n: n/a
  • CRAFTEX 1 HP portable bag-type dust collector

ALSO:

  • (90+) CAT 40 tool holders; LARGE SELECTION of MACHINE ACCESSORIES including KURT machine vises, rotary tables, angle plates, tie-down clamping; press brake dies; (2) sand blast cabinets; pallet jack; die lift cart; inspection equipment; LIFTING ACCESSORIES – lifting magnets, lifting chains; cordless tools; electric tools; hand tools; (5) sections of cantilever racking; (8) sections of medium duty pallet racking; high speed perishable tooling; FORD F-150 pickup truck and MUCH MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com