Surplus Assets of

Devtek Aerospace Inc.

CNC Boring, Profiling & Machining Equipment

 

Date

Thursday, September 17, 2020

Start Time

10:30 AM EDT

Inspection

BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange a date and time.

Removal

All assets must be removed no later than Thursday, October 1 by appointment only.

Industry

Machining
 


 

FEATURING: DMG MORI (2015) (INSTALLED NEW IN 2017) DMU65 MONOBLOCK, 5-Axis CNC vertical machining center w/ 3D HEIDENHAIN TNC640 CNC control (LOADED WITH OPTIONS & EXTREMELY LOW HOURS); KURAKI (1997) KBT-11W, 4.3” CNC table type horizontal boring mill w/ FANUC 16M CNC control; KURAKI (1995) KBT-11WDX, 4.3” CNC table type horizontal boring mill w/ FANUC 15M CNC control; O-M VT5-16N, CNC vertical boring mill w/ 72.75” maximum swing, 63” 4-jaw chuck etc.; SOLD! (2) SNK FSP-120, CNC aerospace profilers; BOEHRINGER VDF V800, CNC flat bed lathe w/ FANUC 18iT CNC control; OKK MCV-820, 4-Axis CNC vertical machining center & MORE!

5 AXIS CNC VERTICAL MACHINING CENTER

  • DMG MORI (2015) (INSTALLED NEW IN 2017) DMU 65 MONOBLOCK, 5 axis CNC vertical machining center with 3D HEIDENHAIN TNC640 control, 25.6” diameter rotary table, travels: X–28.9”, Y–25.6”, Z–22”, A—120 deg./+120 deg., C–360 deg., speeds to 18,000 RPM, HSK63 taper, 60 station ATC, 46 HP, BLUM laser tool measuring, RENISHAW infrared measuring probe, 3D quick set, automation package included (two port thru the table hydraulic lines, robot ready with auto side door, PROFIBUS interface – $27,000 option), high pressure coolant thru spindle, rotating clear window view, chip conveyor, 2344 cutting hours (recorded at time of listing), s/n: 12140013283

CNC VERTICAL BORING MILL

  • OM VT5-16N CNC vertical boring mill with FANUC 11-T CNC control, 72.74” swing, 63” 4-jaw chuck, 63.00” max turning height, travels X- 49.25”, Z-33.50”, power elevating cross-rail with max 47.25” travel in (6) steps, 8.25” square ram size, speeds to 246 RPM, 60 HP main drive motor, 12 station ATC, coolant, chip conveyor, s/n MN-884212 SOLD!

CNC TABLE TYPE HORIZONTAL BORING MILLS

  • KURAKI KBT-11W CNC table type horizontal boring mill with FANUC 16M CNC control, 4.33” spindle diameter, 55” x 63” table, travels X-78.74”, Y-59”, Z-57”, W-19”, ISO 50 taper, speeds to 3500 RPM, 14,300 LBS max table capacity, coolant, s/n 4209
  • KURAKI KBT-11WDX CNC table type horizontal boring mill with FANUC 16M CNC control, 4.33” spindle diameter, 55” x 63” table, travels X-78.74”, Y-59”, Z-57”, W-25”, ISO 50 taper, speeds to 2500 RPM, 14,300 LBS max table capacity, coolant, s/n 3225

CNC VERTICAL AEROSPACE PROFILERS

  • SNK FSP-120V PROFILER (3) spindle vertical CNC aerospace profiler with retrofit FANUC 18i-M CNC control, 144”x48” table, travels X-120”, Y-50”, Z-24”, speeds to 4,000 RPM, CAT 50 taper, 22,000 LBS max table capacity, coolant, chip conveyor, spindle chiller, s/n 450281
  • SNK FSP-120V PROFILER (3) spindle vertical CNC aerospace profiler with FANUC 11-M CNC control, 144”x48” table, travels X-120”, Y-50”, Z-24”, speeds to 4,000 RPM, CAT 50 taper, 22,000 LBS max table capacity, coolant, chip conveyor, spindle chiller, s/n 450832

CNC VERTICAL MACHINING CENTERS

  • OKK MCV 820 CNC vertical machining center with FANUC 11M CNC control, 32” x 78” t-slot table, travels X-63”, Y-32”, Z-28”, speeds to 3,500 RPM, CAT 50 taper, 30 station ATC, TSUDAKOMA 19” 4th axis rotary table (may be sold separately), coolant, chip conveyor, spindle chiller, s/n 167
  • OKK MCV 550 CNC vertical machining center with MELDAS CNC control, 22” x 51” t-slot table, travels X-43”, Y-22”, Z-22”, speeds to 4,000 RPM, CAT 50 taper, 30 station ATC, coolant, chip conveyor, spindle chiller, s/n n/a

CNC FLATBED LATHE

  • OERLIKON BOEHRINGER VDF V 800/11-1 CNC flatbed lathe with retrofit FANUC 18i-T CNC control, 39.37” swing over bed, 90.55” between centers, twin turret tool posts, tailstock, conventional chuck, coolant, safety enclosure, s/n 1049.9214-09

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com