CNC Machining Equipment

Live Webcast Auction!

Date

Thursday, November 17, 2016

Start Time

10:30 AM EST

Inspection

BY APPOINTMENT ONLY. Please call 416.962.9600 to arrange.

Removal

All Items are BY APPOINTMENT ONLY and must be removed by Thursday, December 1, 2016. Please 416.962.9600 to arrange.

Location

CNC Machining Equipment
6537 Taylor Avenue, Box 68, Comber, Ontario, Canada, N0P 1J0

Industry

Machining

 

FEATURING: (2) MATSUURA (2000) ES-450 H2 twin pallet CNC horizontal machining centers with FANUC 18i-M CNC control; MATSUURA (1997) RA-3F twin pallet CNC vertical machining center with YASNAC i80 CNC control; MATSUURA (1994) MC-1000 VF CNC vertical machining center with YASNAC i80M CNC control; FADAL (1995) VMC 4020 HT CNC vertical machining center with FADAL 88HS CNC control; COLCHESTER (2001) A90 STORM CNC turning center with FANUC 2Ti-T CNC control; (3) BENZINGER TNL gang type CNC precision turning centers; MAXIMART (1995) V45-75A sinker type EDM with MAXIMART control; ATLAS COPCO (2000) GA37 screw type air compressor with 50 HP; ALSO AVAILABLE: (20) 5’ x 5’ x 6” ACORN TABLES

CNC HORIZONTAL MACHINING CENTERS

  • (2) MATSUURA (2000) ES-450 H2 twin pallet CNC horizontal machining centers with FANUC 18i-M CNC control, turn table type twin pallet APC, 11.81" x 11.81" pallets, 440 LBS pallet capacity, travels X-17.71", Y-15.74", Z-15.74", 18.89" max distance from pallet top to spindle nose, speeds to 15,000 RPM, BT 40 taper spindle, 30 station ATC, coolant, chip conveyor, spindle chiller, VISIPORT spin window view port, s/n 000814218; 990913846

CNC VERTICAL MACHINING CENTERS

  • MATSUURA (1997) RA-3F twin pallet CNC vertical machining center with YASNAC i80 CNC control, shuttle type twin pallet APC, 31.50" x 16.50" pallets, 600 LBS pallet capacity, travels X-31.50", Y-17.32", Z-19.09", 25.00" max distance from pallet top to spindle nose, speeds to 15,000 RPM, BT 40 taper spindle, 30 station ATC, coolant, chip conveyor, spindle chiller, s/n 971012672
  • MATSUURA (1994) MC-1000 VF CNC vertical machining center with YASNAC i80M CNC control, 43.30" x 20.07" table, 1,300 LBS table capacity, travels X-40.15", Y-20.07", Z-20.07", 27.95" max distance from table top to spindle nose, speeds to 15,000 RPM, BT 40 taper spindle, 30 station ATC, coolant, chip conveyor, spindle chiller, s/n 930610589
  • FADAL (1995) VMC 4020 HT CNC vertical machining center with FADAL 88HS CNC control, 48"x20" table, travels X-40", Y-20", Z-20", speeds to 10,000 RPM, CAT 40 taper spindle, 21 station ATC, coolant, chip tray, s/n 9504662

CNC TURNING CENTERS

  • COLCHESTER (2001) A90 STORM CNC turning center with FANUC 2Ti-T CNC control, 16" swing, 6.6" maximum turning diameter, travels X-7.9", Z-17.7", 12 station turret, speeds to 6,000 RPM, 15 HP, 8" 3-jaw chuck, 2.4" spindle bore, coolant, hydraulic tailstock,  s/n T90259
  • BENZINGER (1998) TNL gang type CNC precision turning center with SIEMENS 810 SINUMERIK CNC control, 8.66” swing, 3.96” max turning length, travels X-5.11” Z-13.66”, 4” chuck, 1.37” spindle bore, speeds to 7000 rpm infinitely variable, 8.75 hp, 4 station gang type tool post, coolant, sliding inspection microscope, s/n 98-300-001
  • BENZINGER (1995) TNL gang type CNC precision turning center with SIEMENS 810 SINUMERIK CNC control, 8.66” swing, 3.96” max turning length, travels X-5.11” Z-13.66”, 4” chuck, 1.37” spindle bore, speeds to 7000 rpm infinitely variable, 8.75 hp, 4 station gang type tool post, coolant, sliding inspection microscope, s/n 95-300-001 
  • BENZINGER TNL gang type CNC precision turning center with SIEMENS SINUMERIK CNC control, 8.66” swing, 3.96” max turning length, travels X-5.11” Z-13.66”, 4” chuck, 1.37” spindle bore, speeds to 7000 rpm infinitely variable, 8.75 hp, 4 station gang type tool post, coolant, sliding inspection microscope, s/n n/a 

EDM

  • MAXIMART (1995) V45-75A sinker type EDM with MAXIMART control, 16" x 31.5" table, 24" x 46" x 15" tanks, 12" stroke, SYSTEM 3R head, FAGOR 3-axis DRO, s/n 5050302

COMPRESSOR

  • ATLAS COPCO (2000) GA37 screw type air compressor with 50 HP, 218 CFM @ 132 PSI, s/n A II 366302

ALSO AVAILABLE:

(20) 5’ x 5’ x 6” ACORN TABLES

MACHINES IN OPERATION

LIVE WEBCAST ONLY

Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS

MODALITÉS ET CONDITIONS DE VENTE

Payment

-WEBCAST (REMOTE) BIDDERS

Pre-Approval by Corporate Assets Inc. will be required. To participate in the auction you must register and be approved. All Webcast (Remote) Bidders require a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see below for applicable Buyer's Premium) and must be by Direct Bank Wire Transfer. To ensure approval as a Bidder please make deposit arrangements as far in advance of the sale as possible. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

-GENERAL

All buyers must complete the "Buyer Deposit Form" and provide Corporate Assets Inc. with a 25% deposit of their total intended purchase amount by way of wire transfer.* The deposit must be received by no later than 1 business day prior to the commencement of the sale.**

Payment in full must be made before or immediately after the conclusion of the auction.

* Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.

** In order to meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

For International (Non Canadian and Non U.S. Residents) Buyers, Webcast Remote Buyers & Online Buyers, all payments shall ONLY be by way of wire transfer.

For Canadian and U.S. On-site Buyers, all payments shall be by way of wire transfer, certified cheque, bank draft, Interac, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

Payment by way of Visa or Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.00.

Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.

Download Full Payment Information
Download Buyer Deposit Form
CAD Wire Transfer Details
USD Wire Transfer Details
GBP Wire Transfer Details
EUR Wire Transfer Details

Proxy Bidding

To place a proxy bid, please refer to the Corporate Asset Inc. PROXY BID FORM or email us at: info@corpassets.com for more information.

All Proxy Bids must be completed in writing, either typed or hand-written, indicate the name of the auction sale, and must be signed and dated. They must be faxed or mailed to our office and received by no later than 3:00 P.M. EST on the day before the auction.


Download Proxy Bid Form