PGM Rail Services Ltd.

Multi-Million Dollar & Late Model Railroad Construction Event!

 

Date

Tuesday, June 11, 2024

Start Time

10:30 AM EDT

Inspection

Monday, June 10 from 8 AM to 4 PM EDT.

Removal

All assets must be removed no later than Friday, July 5 by appointment only. Rigging details to follow.

Catalogue Coming Soon!

FEATURING: CATERPILLAR (2023) 914, compact wheel loader w/ attachments (ONLY 450 HOURS); CATERPILLAR (2015) M320F, hydraulic wheeled excavator w/ HI-RAIL kit, ROTO-TILT & attachments etc. (ONLY 1500 HOURS); CATERPILLAR (2011) M318D, hydraulic wheeled excavator w/ HI-RAIL kit (ONLY 4000 HOURS); CATERPILLAR (2016) 430F2IT backhoe loader w/ attachments (LOW HOURS); CATERPILLAR (2019) 279D, skid steer (ONLY 1300 HOURS); CATERPILLAR 318L, hydraulic tracked excavator w/ electromagnet;  CATERPILLAR D5C SERIES III, crawler tractor; KENWORTH (2019) T800, tri-axle tractor (ONLY 200,000 KM); KENWORTH (2018) T800, tri-drive tractor (ONLY 250,000 KMS); ASPEN (2020) 45’ 60-ton tri-axle lowboy trailer w/ rail kit & 4th axle attachment; LANDOLL (2017) 455A, 53’ 65-ton tri-axle tilt & load trailer with wireless remote control; MAC (2018) 48’ 57-ton quad-axle flatbed trailer; HAULTEC (2005) 48’ 30-ton quad-axle hydraulic dump trailer; HARSCO (2009) JHS, tamper (LOW HOURS); (3) BERT PYKE ballast regulators equipped w/ winter packages; (1) BERT PYKE ballast regulator equipped with summer package; BALLAST TOOLS EQUIPMENT (2022) BTE-305128-PG80 TIE TALON, heavy duty tie changing attachment; ROTOTILT (2022) MG60, hydraulic excavator grapple attachment; (2) FAE brush mulching attachments; ASSORTED hydraulic machine attachments such as magnets, brush cutting units, ripping and plate tamping units etc.; CATERPILLAR P6000, 5,500 lb. LPG forklift with enclosed cab; FORD L-8000, tandem axle dump truck w/ HI-RAIL kit; FORD F-550 SUPER DUTY, pick-up truck w/ HI-RAIL kit and service box; (4) FORD (2018 & 2016) E-450, cube vans; FORD (2017) F-250, pick-up truck; FORD (2021) F-150 XLT, pick-up truck; FORD (2019) F-150 XL, pick-up truck; FORD (2019) RANGER LARIAT, pick-up truck; (10+) 20’ & 40’ sea containers w/ tooling & support equipment; WACKER NEUSON GE 120, 96KW generator; DEVAIR air compressor; HUGE OFFERING OF: Track & Rail inventory, machine attachments, spare parts, pneumatic & hydraulic fittings and accessories, maintenance equipment, fabricating equipment, power & hand tools, rail specific tooling, factory support equipment & MUCH MORE!

TAMPER

  • HARSCO/QUALITY TRACK EQUIPMENT JHS tamper with diesel engine, JUPITER I controls, fully enclosed cab, 2,993.7 hours (recorded on meter at time of listing), s/n: RM6805039

BALLAST REGULATORS

  • BERT PYKE ballast regulator with diesel engine, winter kit including plow & snow blower, 3,926 hours (recorded on meter at time of listing), s/n: 7910
  • BERT PYKE ballast regulator with DETROIT DIESEL diesel engine, winter kit including plow & snow blower, 4,255 hours (recorded on meter at time of listing), s/n: 8125
  • BERT PYKE MODEL KL ballast regulator with diesel engine, enclosed cab, summer kit, 9,151 hours (recorded on meter at time of listing), s/n: 8501
  • BERT PYKE MODEL 5063500 ballast regulator with diesel engine, winter kit including plow & snow blower, s/n: 7925

HYDRAULIC WHEELED EXCAVATORS

  • CATERPILLAR (2015) M320F hydraulic wheeled excavator with CATERPILLAR C7.1 diesel engine, ROTOTILT (2002) R6 hydraulic rotator attachment, HI-RAIL kit, 1,536 hours (recorded on meter at time of listing), s/n: CATM320FPF2W00327
  • CATERPILLAR (2011) M318D hydraulic wheeled excavator with CATERPILLAR diesel engine, 56” digger bucket, HI-RAIL kit, BATEMAN diesel genset electromagnet generator,4,294 hours (recorded on meter at time of listing), s/n: CATM318DCD8W00257

HYDRAULIC TRACKED EXCAVATOR

  • CATERPILLAR (2003) 318CL hydraulic tracked excavator with CATERPILLAR diesel engine, ADVANCED MAGNET MW5-48L-LM electromagnet attachment, BATEMAN diesel genset electromagnet generator, 14,997 hours (recorded on meter at time of listing), s/n: CAT0318CKMDY00193

EXCAVATOR ATTACHMENTS

  • BALLAST TOOLS EQUIPMENT (2022) BTE-305128-PG80 TIE TALON heavy duty tie changing attachment, s/n: 159800
  • ROTOTILT (2022) MG60 hydraulic excavator grapple attachment with 8,400 kg lifting capacity, s/n: 554571
  • SERCO 680A899 hydraulic excavator grapple attachment with 3,200 lb. capacity, s/n: G-7981
  • H&H (2002) CATM318-48-HD 1.5 yd3 excavator digger bucket attachment, s/n: 28654
  • FAE (2012) UMI/HY150 64” hydraulic excavator mulcher attachment, s/n: 12-749
  • FAE 64” hydraulic excavator mulcher attachment, s/n: n/a
  • OHIO 46” dia. excavator electromagnet attachment, s/n: n/a
  • MFG. UNKNOWN approx. 46” dia. excavator electromagnet attachment, s/n: n/a
  • CUTTLER HAMMER excavator electromagnet attachment, s/n: n/a

COMPACT WHEEL LOADER

  • CATERPILLAR (2023) 914 compact wheel loader with CATERPILLAR C3.6 diesel engine, 2.0 yrd3 bucket, 453.8 hours (recorded on meter at time of listing), s/n: CAT00914CJC301031

BACKHOE

  • CATERPILLAR (2016) 430F2IT backhoe loader with CATERPILLAR C4.4B diesel engine, 92” loader bucket, 28” digger bucket, 4,798.4 hours (recorded on meter at time of listing), s/n: CAT0430FLHWG00353

BACKHOE ATTACHMENTS

  • CATERPILLAR (2018) CAT430F-8-CR backhoe bucket attachment, s/n: 114243
  • CATERPILLAR (2015) CAT420F-FR backhoe trenching bucket attachment, s/n: R2863
  • CATERPILLAR (2014) CAT420E-36-DC backhoe bucket attachment, s/n: L075R0013
  • CATERPILLAR 0.48 yrd3 backhoe digger bucket attachment, s/n: 7L200156
  • (2) CATERPILLAR backhoe fork attachments

CRAWLER TRACTOR

  • CATERPILLAR D5C SERIES III crawler tractor with CATERPILLAR 3046 diesel engine, 98” blade, 5,518 hours (recorded on meter at time of listing), s/n: 9DL02379

SKID STEER

  • CATERPILLAR (2019) 279D skid steer loader with CATERPILLAR C3.3B diesel engine, forklift attachment, 1,396.3 hours (recorded on meter at time of listing), s/n: CAT0279DJGTL06408

SEMI-TRACTOR TRUCKS

  • KENWORTH (2019) T800 tri-axle semi-tractor truck with CUMMINS ISX diesel engine, EATON FULLER 18-speed transmission, touch screen display, 205,739 km (recorded on odometer at time of listing), VIN: 1XKDP4TXXKJ945326
  • KENWORTH (2018) T800 tri-drive semi-tractor truck with day cab, CUMMINS ISX-565 diesel engine,  EATON FULLER 18-speed transmission, 252,650 km (recorded on odometer at time of listing), VIN: 1XKDP4TX4JJ994052

SEMI-TRAILERS

  • LANDOLL (2017) 455A 53’ 65-ton tri-axle tilt & load trailer with hoist, wireless remote control, VIN: 1LH455WJ7H1A24030
  • ASPEN (2020) TRA/REM 45’ 60-ton tri-axle lowboy gooseneck trailer with rail kit, 4th axle attachment, VIN: 2A9LB4531LN125208
  • LOAD KING MB-251 45’ 12-ton tri-axle lowboy gooseneck trailer with rail kit, VIN: 5LKB12112X1022550
  • MAC (2018) TRA/REM 48’ 57-ton quad-axle flatdeck trailer, VIN: 5MAPA4841JA042174
  • HAULTEC (2005) TRA/REM 48’ 30-ton quad-axle dump trailer, VIN: 2C9B2R3F151012770

DUMP TRUCK

  • FORD L8000 tandem axle diesel dump truck with regular cab, FORD diesel engine, EATON FULLER manual transmission, HI-RAIL kit, CHELSEA power take-off,  RWD, hydraulic dump box, VIN: 1FDYK82A2KVA13934

PICKUP TRUCKS

  • FORD (2021) F150 XLT crew cab pickup truck with 3.5L 6 cyl. gas engine, auto. transmission, 4x4, tonneau cover, 155,774 km (recorded on odometer at time of listing), VIN: 1FTFW1E84MKD39349
  • FORD (2019) F150 XL pickup truck with 5.0L 8 cyl. gas engine, auto. transmission, RWD, bed cap, 54,342 km (recorded on odometer at time of listing), VIN: 1FTMF1C5XKKD40177
  • FORD (2019) RANGER LARIAT crew cab pickup truck with 2.3L 4 cyl. gas engine, auto. transmission, 4x4, tonneau cover, 122,700 km (recorded on odometer at time of listing), VIN: 1FTER4FH0KLA43268
  • FORD (2017) F250 XLT SUPER DUTY crew cab pickup truck with 6.2L 8 cyl. gas engine, auto. transmission, 4x4, fuel tank, toolbox, VIN: 1FT7W2B60HEF03245
  • FORD (2012) F550 XLT SUPER DUTY hi-rail field service truck with 6.8L 10 cyl. gas engine, auto. transmission, 4x4, multi compartment service box, VIN: 1FD0W5HY2CEA18685

CUBE VANS

  • FORD (2018) E450 SUPER DUTY cube van with 6.8L 10 cyl. gas engine, auto. transmission, 89,235 km (recorded on odometer at time of listing), VIN: 1FDXE4FS0JDC25962
  • FORD (2018) E450 SUPER DUTY cube van with 6.8L 10 cyl. gas engine, auto. transmission, 131,816 km (recorded on odometer at time of listing), VIN: 1FDXE4FS7JDC25960
  • FORD (2016) E450 SUPER DUTY cube van with 5.4L 8 cyl. gas engine, auto. transmission, 42,459 km (recorded on odometer at time of listing), VIN: 1FDWE4FL5GDC28921
  • FORD (2016) E450 SUPER DUTY cube van with 5.4L 8 cyl. gas engine, auto. transmission, 56,146 km (recorded on odometer at time of listing), VIN: 1FDWE4FL2GDC28875
  • GMC (2015) SAVANA cube van with 6L 8 cyl. gas engine, auto. transmission, RWD, 52,594 km (recorded on odometer at time of listing), VIN: 1GD374CG0F1161133
  • CHEVROLET (2007) EXPRESS cube van with 6L 8 cyl. gas engine, auto. transmission, RWD, 100,759 km (recorded on odometer at time of listing), VIN: 1GBJG31U571208709

FORKLIFT

  • CATERPILLAR P6000 5,500 lb. capacity LPG forklift with 186” max. lift height, 3-stage mast, side shift, multi-surface tires, enclosed cab, 6,007 hours (recorded on meter at time of listing), s/n: AT13F02427

RAIL SUPPORT EQUIPMENT

  • GEISMAR STUMEC (2015) hydraulic spike driver with GEISMAR STUMEC DC-8 hydraulic power pack, s/n: n/a
  • MFG. UNKNOWN gas-powered hydraulic spike driver with LIFTON LP11 hydraulic power pack, s/n: n/a
  • (4) GEISMAR STUMEC MP.12 6” gas-powered rail grinders with speeds to 3800 RPM, s/n: 17850, 05-29813, 05-29815, n/a
  • GEISMAR STUMEC (2014) MC.3 gas-powered frog and point rail grinder, s/n: 1269416
  • GEISMAR STUMEC MC.2 gas-powered frog and point rail grinder, s/n: 4047
  • GEISMAR STUMEC (2014) JB60 hydraulic rail bender with 60 ton capacity, s/n: 855
  • (3) GEISMAR STUMEC PR3 gas-powered rail drills, s/n: n/a, n/a, 7942
  • MFG. UNKNOWN 2.1 HP gas-powered handheld rail drill, s/n: n/a
  • (6+) HUSQVARNA gas-powered handheld rail saws

SUPPORT EQUIPMENT

  • WHACKER G120 96kw skid-mounted mobile generator with JOHN DEERE 4.5L diesel engine, 208-480V 3 phase output, 120-277V single phase output, (2) 20A GFI receptacles, (3) 50A twist lock receptacles, s/n: n/a
  • WATER WACKER WSH3030E-P LPG heated pressure washer with 200 deg. F. max. temperature, 5 HP, 3000 PSI, s/n: P08-3038109A
  • LINCOLN ELECTRIC 256 POWER MIG digital MIG welder with cables & guns, s/n: n/a
  • KBC 250FT floor-type drill press with 16”x19” table, 11” throat, speeds to 2940 RPM, s/n: n/a
  • DEVAIR 10 HP conventional air compressor, s/n: n/a
  • CASE MODEL AV600 vibrating plate tamper, s/n: 840310215

ALSO:

  • LARGE QUANTITY of steel rail, rail anchors, tie plates & track fasteners; machine attachments; (10+) 20’ & 40’ sea containers with tooling & support equipment; pneumatic tools; survey equipment; spare parts – filters, belts, pneumatic & hydraulic fittings and accessories; lifting accessories – shackles, straps, chains; hardware; portable sprayers; jacks; shop supplies; field supplies; rail specific tooling and MUCH MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 19% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com