GS Global Manufacturing

Late Model CNC Machining & Fabricating Equipment



Tuesday, March 7, 2023

Start Time

10:30 AM EST


Monday, March 6 from 9 AM to 5 PM or by appointment. Please email to arrange.


All assets must be removed no later than Tuesday, March 28 by appointment only. Rigging details below.



FEATURING: HAAS (2012) VF4, CNC vertical machining center w/ RENISHAW probe system; HAAS (2005) EC 300, high-speed CNC twin pallet horizontal machining center w/ 12,000 RPM, through spindle coolant, inline direct-drive spindle, etc.; HYD-MECH S-10A, horizontal saw; MITSUBISHI FUSO, dually box truck w/roll-up side curtain; HYSTER 5,000 lb capacity indoor LPG forklift; RAYMOND 4,500 lb capacity indoor electric forklift; SKYJACK SJIII 4830, electric scissor lift; LINCOLN ELECTRIC high volume fume extraction system; (2) NEDERMAN portable fume extraction units; LARGE ASSORTMENT OF perishable tooling, machine tool accessories, precision inspection equipment, late model LINCOLN welders, general machining equipment, RAW MATERIAL & SHEET STOCK INVENTORY, factory support equipment & MORE!

Rigging and Removal Details

Montreal Rigging
Rob Marleau
C: 514 781 0404

Don Marleau
514 949 7138

*All assets must be removed no later than Tuesday, March 28. For everyone’s safety removal at this site is conducted strictly by appointment only. All machinery buyers must contact Don Marleau 514-949-7138 to set their pick-up appointments upon payment in full.

*Further information on removal details can be found in the Terms & Conditions tab or in the Lot Catalogue.


Trucking and transport services, including cross-border logistics, are available through Fuze Logistics Inc. Please contact Chris Tan for a firm quote or any questions regarding transportation.

Fuze Logistics Services Inc.
Chris Tan




  • HAAS (2012) VF-4 CNC vertical machining center with HAAS CNC control, 18" x 52" table, travels: X-50", Y-20", Z-25", CAT 40 taper, 24-station ATC, RENISHAW OTS tool breakage detection system, coolant, chip auger, 195-260v/3ph/50-60hz, s/n 1092586


  • HAAS (10/2005) EC-300 CNC horizontal machining center with HAAS CNC control, (2) 12" X 12" pallets, travels: X-20", Y-18", Z-14", full 4th A-axis (4AXRP-E3 option), speeds to 12,000 RPM, CAT 40 spindle taper, optional 40-station ATC, high pressure through-spindle coolant, chip auger, 208-230V/3PH/50-60HZ, S/N 58564 (CI) (TOMBSTONES SOLD SEPARATELY)


  • LINCOLN ELECTRIC POWER MIG 256 digital MIG welder with cables and gun, s/n M3190803465
  • LINCOLN ELECTRIC POWERMIG 260 digital MIG welder with cables and gun, s/n M3181012229
  • MILLER SYNCWAVE 250 TIG welder with MILLER COOLMATE 4 chiller, cables and gun, s/n La057817
  • NELSON FASTENER SYSTEMS PRO*WELD CD-212 stud welder with cables and gun, 110v/1ph/60hz, s/n 212-107-1018G
  • PRO.POINT 220v spot welder, s/n N/A
  • (2) NEDERMAN 1.5 HP portable fume snorkels, 115v/1ph/60hz, s/n 07495-00; 06170-00
  • LINCOLN ELECTRIC (2008) STATIFLEX 6000MS 5 HP smoke extractor, s/n: s0170850002


  • MITSUBISHI (2009) dually box truck with roll-up side curtains, 175,830 km (recorded on meter at time of listing), vin JL6CCG1S6AK009487
  • HYSTER S50XM LPG forklift with 4,800 lb max. capacity, 189" max. vertical reach, 3-stage mast, side-shift, cushion tires, 11,029.7 hours (recorded on meter at time of listing), s/n D187V27697A
  • RAYMOND 4700C50HM 36V electric forklift with 3,650 lb max. capacity, 189" max. vertical reach, 3-stage mast, side-shift, cushion tires, 18,061.1 hours (recorded on meter at time of listing), s/n 470-12-HM30544
  • SKYJACK SJIII4830 electric scissor lift with 700 LB max. capacity, elevated working height 38', extendable platform, solid tires, s/n: 86699


  • HYD-MECH S-10A horizontal bandsaw with hydraulic bundling, manual shuttle, 600v/3ph/60hz, s/n WA0398001
  • KING INDUSTRIAL (2019) KC-129DS 5" x 6" dual swivel horizontal bandsaw with 5" DIA cutting capacity, 115v/1ph/60hz, s/n 91FQ0747
  • GROB NS18 vertical bandsaw with 24" x 24" table and blade welder, s/n 9393
  • MIDWEST SANDRIGHT PFA-160 2-head belt sander with MARCUS 30 KVA transformer, 230v/3ph/60hz, s/n 3126-0812
  • MANFORD (2000) SP-460FVS vertical turret milling machine with 11" x 52" table, speeds to 3,600 RPM, NEWALL DP8 3-axis DRO, s/n 000127
  • CLAUSING drilling station with (3) CLAUSING 15 drill presses, 60" x 20" table, s/n N/A
  • CLAUSING 1767 15" drill press, s/n 15535905
  • KING CANADA KC-110C 10" drill press, s/n 14889/0052
  • BROWN BOGGS 31" conventional rolls, s/n N/A
  • PEXTO 31" conventional rolls, s/n N/A
  • TENNSMITH T52 52" foot shear with 16 GA mild steel capacity, s/n 15972
  • MFG UNKNOWN 121 de-burring machine, s/n N/A
  • PEXTO 31" conventional rolls, s/n N/A
  • CORISMA MACHINE TOOL OMEGA CM45 sinker type EDM machine with 15.75" x 27.5" table, HEIDENHAIN 3-axis DRO, s/n 9070385
  • HOTPACK 1420-3 electric batch oven, 208v/3ph/60hz, s/n 44504


  • MFG UNKNOWN jib crane with KITO 3 TON electric hoist, DEMAG pendant control, s/n n/a
  • SMAK MANUTENTION suction cup vacuum lifter with (8) suction cups, 1,500 lb capacity, s/n N/A
  • ORION PACKAGING l66/5 automatic pallet wrapper, 115v/1ph/60hz, s/n 9071073
  • LOCOSC LP7620 platform scale with 10,000 LB capacity, INSCALE LP7510A DRO, s/n 63720
  • NIKON R-14 profile projector, s/n 39427
  • LITTLE BLASTER (2004) LB 4024-3 sandblast cabinet, s/n LB041001240 SG


  • LARGE SELECTION OF CAT 40/50 & BT 40 taper tool holders; machine vises; granite surface plates & inspection equipment; transformers; pallet jacks; dumping hoppers; raw bar, tube & sheet stock materials; office furniture & MORE!


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.


A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.


  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."



  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.



The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.


Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.





*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005 or