NEDERMAN dust collector

CURRENCY: CAD (2008) NEDERMAN 88000054 portable welding fume extractor with 1.5HP blower, bottom bin discharge dust collector, 115v/1ph/60hz, s/n n/a LOCATION: Tillsonburg, Ontario

NEDERMAN dust collector

CURRENCY: CAD (2008) NEDERMAN 88000054 portable welding fume extractor with 1.5HP blower, bottom bin discharge dust collector, 115v/1ph/60hz, s/n n/a LOCATION: Tillsonburg, Ontario

NEDERMAN dust collector

CURRENCY: CAD (2008) NEDERMAN 88000054 portable welding fume extractor with 1.5HP blower, bottom bin discharge dust collector, 115v/1ph/60hz, s/n n/a LOCATION: Tillsonburg, Ontario

BEHRINGER automatic horizontal bandsaw

CURRENCY: CAD BEHRINGER HBE 511 A DYNAMIC automatic horizontal bandsaw with BEHRINGER PLC control, 20″ @ 90 degree max round cutting capacity, 20″x20″ @ 90 degree max square cutting capacity, hydraulic vise, bundling vise, servo auto down feed, coolant, full enclosure, 460v/3ph/60hz, s/n 10007673 LOCATION: Tillsonburg, Ontario

TOSHIBA CNC table-type horizontal boring mill

CURRENCY: USD TOSHIBA BTD110 R16 CNC table-type horizontal boring mill with TOSNUC 888 CNC control, 4.3” spindle, 63”x55” rotary table, Travels: X-78.7” Y- 59.1” Z- 57.1” W- 19.7”, B – 360 degrees in 0.0001 degree indexing, BT50 spindle taper, speeds to 3000 RPM, 40 HP spindle motor, 38-station ATC, coolant, chip conveyor, s/n: 144687 LOCATION:…

MAS 6′ way type radial arm drill

CURRENCY: USD MAS 6′ way type radial arm drill with speeds to 2500rpm, 6hp, 22″ x 22″ x 16″ t-slot box table, power elevation, power traverse, preselect, coolant s/n: 2723 LOCATION: Stoney Creek, Ontario

MERLI CLOVIS 28 gap bed engine lathe

CURRENCY: USD MERLI CLOVIS 28 gap bed engine lathe with 30” swing over bed, 34” swing in the gap, 269” distance between centers, 4” spindle bore, 24” 4- jaw chuck, speeds to 1010RPM, inch/mm threading, coolant, steady rests s/n: 110244 LOCATION: Stoney Creek, Ontario

TOS SU125 engine lathe

CURRENCY: USD TOS SU125 engine lathe with 54” swing over bed, 330” distance between centers, 4” spindle bore, 25” 3- jaw chuck, speeds to 450RPM, inch/mm threading, coolant, (2) steady rests s/n: 0429488 LOCATION: Stoney Creek, Ontario

TOS (1988) W100A table-type horizontal boring mill

CURRENCY: USD TOS (1988) W100A table-type horizontal boring mill with 4” spindle, 49”x49” power rotary table, 44” vertical travel, 68.89” cross travel, 35.43” spindle travel, 50 taper spindle, speeds to 900 RPM, (2) MITUTOYO 2 axis DROs, s/n: 2130 LOCATION: Stoney Creek, Ontario

TOS (1994) W100A table-type horizontal boring mill

CURRENCY: USD TOS (1994) W100A table-type horizontal boring mill with 4” spindle, 49”x49” power rotary table, 44” vertical travel, 68.89” cross travel, 35.43” spindle travel, 50 taper spindle, speeds to 900 RPM, tailstock, (1) HEIDENHAIN 2 axis DROs, s/n: 3320 LOCATION: Stoney Creek, Ontario