Surplus Assets of

Westron Rotating Solutions Canada Inc.

Exceptional Offering of New & Rebuilt MRO Spares!

 

Date

Tuesday, December 15, 2020

Start Time

9:30 AM MST

Inspection

BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange a date and time.

Removal

All assets must be removed no later than Friday, January 8 by 5:00 P.M. BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange a date and time.

Location

3 Locations in Alberta, Canada

Industry

Other
 


 

3 LOCATIONS IN ALBERTA:
Westron - CALGARY
#3, 3600-21 ST NE
Calgary, AB T2E 6V6 		Westron - DIDSBURY
#7 CO-OP RD
Didsbury, AB T0M 0W0		 Westron - EDMONTON
12607-125 ST
Edmonton, AB T5L 0T5

FEATURING: GARDNER DENVER (2019) LRS90-132E10 180 HP, 190 PSI compressor; GARDNER DENVER (2019) 130-45E 50 HP, 130 PSI compressor; GARDNER DENVER (2019) L22 30 HP, 130 PSI compressor; GARDNER DENVER (2017) L90-132B 150 HP, 130 PSI compressor; GARDNER DENVER (2015) L75-9A 100 HP, 130 PSI compressor; SULLAIR AIR PACKAGE diesel 450 HP, 400 PSI, 1600 CFM, compressor with CATERPILLAR C-15 engine; SULLAIR 225H 85 HP, 225 CFM, 150 PSI tow-behind diesel compressor with CATERPILLAR C3.4 engine; ATLAS COPCO GA160 200 HP compressors; ATLAS COPCO GA110 150 HP compressor; SULLAIR 20-100L 100 HP, 100/110 PSI compressor; INGERSOLL-RAND SSR-EP100 100 HP, 125 PSI compressor; INGERSOLL-RAND SSR250 60 HP, 125 PSI compressor; GARDNER DENVER ELECTRASAVER II 50 HP, 105 PSI compressor; SULLAIR 12-50H 50 HP, 125 PSI compressor; COMPAIR HYDROVANE 170CK 50 HP compressor; GARDNER DENVER RDS 150A dryer; GARDNER DENVER RNC750A5B dryer; GARDNER DENVER RNC100A2C1N1F chiller; COPELAND F3AU-0151-CFV-001 chiller; BETTERFLUID 88 gal. capacity fuel tank; ACO FEEDER industrial wood chipper; LARGE QUANTITY OF BLOWERS, MOTORS & MRO including but not limited to (2) GARDNER DENVER DUROFLOW blowers; GARDNER DENVER 5CDL9K cycloblower; GARDNER DENVER DUROFLOW INDUSTRIAL 45 series blower; REPUBLIC REGENERATIVE blower system; (5) GARDNER DENVER 5CDL cycloblowers; (7) EAGLE HD220 rotary gas compressors; GE 400 HP motor; BALDOR RELIANCE 300 HP motor; CHAMPION R15 compressor pump; (6) SILEX VACUUM SYSTEMS silencers; LINCOLN & MARATHON 150 HP motors; TOSHIBA 100 HP motor; LEESON 75 HP motor; REVCO 40KVA transformer; DELTA 7.5 HP blower fan; (5) INGERSOLL-RAND 3”-1/2” diaphragm pumps; (2) FLYE 30 HP 12” pumps; (3) HIBON SNH820 blowers; GARDNER DENVER SSMG99D 135 HP, 375 PSI gas air/end blower; HOLMES 100 HP blower; FLEET OF SERVICE VEHICLES including FORD (2009) E250 cargo van; (2) FORD F350 XLT SUPER DUTY pickup trucks; FORD F250 XLT pickup truck; CHRYSLER (2013) 200 sedan; CATERPILLAR GP25 4,400 lbs cap LPG forklift and MUCH MORE!

THE EXCLUSIVE RIGGER FOR THIS SALE IS:

Westron Rotating Solution
pickup@corpassets.com

* IMPORTANT INFORMATION REGARDING REMOVAL*

SAFETY DISTANCING RESTRICTIONS CURRENTLY IN EFFECT IN ALBERTA WILL BE ADHERED TO. ALL REMOVALS WILL BE CONDUCTED BY APPOINMENT ONLY. BUYERS MUST COMPLY WITH THE APPOINTMENT SCHEDULE. DROP IN PICK-UP IS NOT AVAILABLE AT THIS AUCTION. ALL PERSONS SHOWING UP ON SITE WITHOUT AN APPOINTMENT OR OUTSIDE OF THEIR SCHEDULED TIME WILL BE TURNED AWAY. THERE ARE NO EXCEPTIONS. THANK YOU FOR YOUR UNDERSTANDING.    

REMOVAL DETAILS:  

  • Posted fees include disconnecting, dismantling, match marking, labeling as the case may be and otherwise prepping and loading the equipment on a suitable customer supplied flatbed truck or trailer at the door. Posted fees do not include container loading, blocking/bracing, specialty packaging or other services. These services are available on site and will be billed separately. Please contact the mover for a firm quote.
  • Posted removal fees in this catalog will apply to all items at this auction.
  • Posted loading fees for all items are mandatory, non‐negotiable and will automatically apply to all successful bidders. There are no exceptions therefore please bid accordingly.
  • Domestic and international shipping, freight forwarding and transportation services are available on site at this auction. Please contact mover for details and a firm quote.
  • Buyer’s premium does not apply to posted rigging fees. No item(s) will be released until auction price and removal fees have been paid in full. No exceptions!
  • For everyone’s safety removal at this site is conducted strictly by appointment only. All buyers must contact pickup@corpassets.com to set their pick-up appointments upon payment in full.  

COMPRESSORS

  • SULLAIR AIR PACKAGE diesel rotary screw air compressor with 450 HP, 400 PSI, 1600 CFM, CATERPILLAR C-15 diesel engine, s/n: n/a
  • GARDNER DENVER (2019) LRS90-132E10 rotary screw air compressor with 180 HP, 190 PSI, s/n: S565967
  • GARDNER DENVER (2019) 130-45E rotary screw air compressor with 50 HP, 130 PSI, s/n: S583216
  • GARDNER DENVER (2019) L22 rotary screw air compressor with 30 HP, 130 PSI, s/n: D195229
  • GARDNER DENVER (2017) L90-132B rotary screw air compressor with 150 HP, 130 PSI, 2482 RPM, s/n: S529175
  • GARDNER DENVER (2015) L75-9A rotary screw air compressor with 100 HP, 130 PSI, 3600 RPM, s/n: S481123
  • (2) ATLAS COPCO GA160 rotary screw air compressors with 200 HP, s/n: APF145210, AIF.040642
  • ATLAS COPCO GA110 rotary screw air compressor with 150 HP, s/n: AIF.022028
  • SULLAIR 20-100L rotary screw air compressor with 100 HP, 100/110 PSI, 6443 hrs (recorded at time of listing), s/n: 003-51881
  • INGERSOLL-RAND SSR-EP100 rotary screw air compressor with 100 HP, 125 PSI, s/n: CK4021U00356
  • INGERSOLL-RAND SSR250 rotary screw air compressor with 60 HP, 125 PSI, s/n: 24016079A
  • GARDNER DENVER ELECTRASAVER II rotary screw air compressor with 50 HP, 105 PSI, s/n: n/a
  • SULLAIR 12-50H rotary screw air compressor with 50 HP, 125 PSI, 18,424 hrs (recorded at time of listing), s/n: 003-53325
  • COMPAIR HYDROVANE 170CK rotary vane tank mounted air compressor with 50 HP, s/n: 5HV301609
  • GARDNER DENVER RDS 150A refrigerated air dryer
  • GARDNER DENVER RNC750A5B refrigerated air dryer

BLOWERS, MOTORS & MROs

  • (2) GARDNER DENVER DUROFLOW 4000 RPM blowers
  • GARDNER DENVER 5CDL9K 4000 RPM positive rotary cycloblower, s/n: S024481
  • GARDNER DENVER DUROFLOW INDUSTRIAL 45 series blower, s/n: S3944706
  • REPUBLIC REGENERATIVE blower system with 8.5 HP, 353 CFM, s/n: 4659
  • (5) GARDNER DENVER 5CDL cycloblowers
  • (7) EAGLE HD220 rotary gas compressors
  • GENERAL ELECTRIC 400 HP electric motor with 1775 RPM, 460V, 3 phase, 60 Hz
  • BALDOR RELIANCE 300 HP electric motor with 3570 RPM, 460V, 3 phase, 60 Hz
  • CHAMPION R15 piston compressor pump, s/n: DRO263690
  • (6) SILEX VACUUM SYSTEMS silencers with 6” flange, class 6 discharge
  • LINCOLN ELECTRIC 150 HP electric motor with 1780 RPM, 460V, 3 phase, 60 Hz
  • MARATHON 150 HP electric motor with 460V, 3 phase, 60 Hz
  • TOSHIBA 100 HP electric motor with 1775 RPM, 460V, 3 phase, 60 Hz
  • REVCO transformer with 40 KVA, 200/460V, 3 phase, 50 Hz
  • DELTA blower fan with 7.5 HP, 575V, 3 phase, 60 Hz
  • (5) INGERSOLL-RAND 3”-1/2” diaphragm pumps
  • (2) FLYE 12” port pumps with 30 HP, 575V, 3000 RPM
  • (3) HIBON SNH820 blowers
  • GARDNER DENVER SSMG99D gas air/end blower with 135 HP, 375 PSI, 3245 RPM, s/n: S233441
  • HOLMES blower with 100 HP electric motor, 1765 RPM, 460V, 60 Hz
  • LEESON 75 HP electric motor with 1780 RPM, 208/460V, 3 phase, 60 Hz

VEHICLES

  • FORD (2009) E250 cargo van with 4.6L 8 cylinder gas engine, automatic transmission, power windows, power locks, AM/FM radio, A/C, 144,035 km (recorded at time of listing), VIN: 1FTNE24W09DA33832
  • FORD (2007) F350 XLT SUPER DUTY pickup truck with 5.4L 8 cylinder gas engine, automatic transmission, power windows, power locks, AM/FM radio, CD, A/C, extended cab, 4x4, bed cap with storage, VIN: 1FTWX31598EC10256
  • FORD F350 XLT SUPER DUTY pickup truck with 5.4L 8 cylinder diesel engine, automatic transmission, power windows, power locks, AM/FM radio, CD, A/C, extended cab, 4x4, bed cap with storage, VIN: n/a
  • FORD F250 XLT pickup truck with 5.4L 8 cylinder TRITON gas engine, automatic transmission, power windows, power locks, AM/FM radio, CD, A/C, 4x4, VIN: n/a
  • CHRYSLER (2013) 200 with 2.4 L 4 cylinder engine, automatic transmission, power windows, power locks, AM/FM radio, CD, A/C, 175,753 km (recorded at time of listing), VIN: 1C3CCBAB9DN667873

FACTORY SUPPORT EQUIPMENT

  • CATERPILLAR GP25 LPG forklift with 4400 lb. capacity, 190” max. lift height, 3 stage mast, side shift, multi-surface tires, 2398 hrs (recorded at time of listing), s/n: 5AM04220
  • SULLAIR 225H single axle tow-behind rotary screw air compressor with 225 cfm, 150 psig, CAT C3.4 diesel engine with 83 bhp, 1987 hrs (recorded at time of listing), s/n: 201106300004
  • GARDNER DENVER RNC100A2C1N1F chiller unit with 120 gal. receiver tank, s/n: 1000003491874
  • COPELAND F3AU-0151-CFV-001 liquid chiller unit, s/n: n/a
  • BETTERFLUID 88 gal. capacity fuel tank
  • ACO FEEDER industrial wood chipper

ALSO:

LARGE SELECTION of ELECTRIC MOTORS from 10 HP to 400 HP; BRAND NAME air & gas blowers; GARDNER DENVER & SULLAIR compressor parts; rotary valves; gearboxes; gas compressors; fire suppression system components; HUGE QUANTITY of MRO’s and spare parts and MUCH MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.
DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS
MODALITÉS ET CONDITIONS DE VENTE

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.
Download Full Payment Information
Download Buyer Deposit Form
CAD Wire Transfer Details
USD Wire Transfer Details
GBP Wire Transfer Details
EUR Wire Transfer Details

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.
 
Please read our Full Terms & Conditions for Removal Requirements

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

Rigger Release Authorization Form

 

Sample of 'Certificate of Insurance' or 'CI'

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com		 Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com