Surplus Assets of

Westron Rotating Solutions Canada Inc. #4

New & Used Air Compressors, Spare Parts and More!

 

Date

Thursday, May 6, 2021

Start Time

10:30 AM EDT

Inspection

BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange a date and time.

Removal

All assets must be removed no later than Thursday, May 20 by 5:00 P.M. EST BY APPOINTMENT ONLY.

Location

Assets Located in Brantford, Ontario

Industry

Other
 


 

FEATURING: GARDNER DENVER APEX5-15A 15 HP rotary screw air compressor; GARDNER DENVER (REBUILT 2019) BESDB 15 HP tank-mounted rotary screw air compressor; (2) ATLAS COPCO GA160 200 HP rotary screw air compressors; GARDNER DENVER FAUOPD 200 HP rotary screw air compressor; (2) GARDNER DENVER ELECTRA SAVER II 100 HP rotary screw air compressors; (3) GARDNER DENVER ELECTRA SAVER II 50 HP liquid-cooled rotary screw air compressors; DOMNICK-HUNTER POLESTAR DRD325 refrigerated air dryer; THOMPSON GORDON TG500 refrigerated air dryer; (2) ULTRA AIR UA1000A0 refrigerated air dryers; BRIDGEPORT SERIES I vertical milling machine with 42"x9" table, speeds to 4200 RPM, SHARS power feed; CY MAGNUM-CUT FEL-26120GCY 26”x120” gap bed engine lathe with 4.25" spindle bore, speeds to 1120 RPM; HOTSY APW 7660 automatic parts washer with rotary table; RIDGID 300 pipe threader with tri-stand, threading heads, attachments, pipe cutter and dies; CLARK C500-Y135 LPG 13,500 lb. outdoor forklift with 206" max. lift height; HYSTER H80XM LPG 7,390 lb. forklift; CANABLAST blast system with CANABLAST M-3648-P shot blast cabinet, CANABLAST PRM-16 dust collector with CANABLAST DC-160 reclamation unit; (2) ECONOLINE shot blast cabinets; DODGE (2014) RAM service van with 3.6L V6 engine; MILROYAL MC1-M40-D141 metering pump with 54.5 GPH capacity; (2) MILROYAL MB1-M42-D140 metering pumps with 27.6 GPH capacity; GARDNER DENVER INDUSTRIAL 45 SERIES blower with 4000 max. RPM; (3) DEAN PH2111 1X1.5/2X8 centrifugal pumps; GOULDS 360 PSI centrifugal pump with 15 HP motor; SUTORBILT GARDNER DENVER GACLBRA blower with 3600 RPM; HUSKY 4.6 gal. portable shop compressor; (4) 5000 lb. pallet jacks AND MORE!

ROTARY SCREW AIR COMPRESSORS

  • GARDNER DENVER APEX5-15A rotary screw air compressor with 15 HP, 123 PSI, s/n: D119780
  • GARDNER DENVER (REBUILT 2019) BESDB tank-mounted rotary screw air compressor with 15 HP, 125 PSI, s/n: W16470
  • (2) ATLAS COPCO GA160 rotary screw air compressors with 200 HP, 157 PSI, s/n: AIF.018745, AIF.040797
  • GARDNER DENVER FAUOPD rotary screw air compressor with 200 HP, 125 PSI, s/n: M62150
  • SULLAIR 20-150H-ACAC rotary screw air compressor with 150 HP, s/n: 003-78677
  • GARDNER DENVER EAQ99K ELECTRA SCREW rotary screw air compressor with 125 HP, s/n: S030186
  • GARDNER DENVER EAP0MB ELECTRA SAVER II rotary screw air compressor with 100 HP, 25 PSI, 2488 hrs (recorded on meter at time of listing), s/n: M42739
  • GARDNER DENVER ECPQMC rotary screw air compressor with 100 HP, 100 PSI, s/n: M34149
  • GARDNER DENVER ECMQLC ELECTRA SAVER II rotary screw air compressor with 75 HP, 110 PSI, s/n: M39571
  • GARDNER DENVER EBHSJB ELECTRA SAVER II liquid-cooled rotary screw air compressor with 50 HP, 100 PSI, s/n: M70601
  • GARDNER DENVER ECHSHE ELECTRA SAVER II liquid cooled rotary screw air compressor with 50 HP, 100 PSI, s/n: M24193
  • GARDNER DENVER EBHSJD ELECTRA SAVER II liquid-cooled rotary screw air compressor with 50 HP, 100 PSI, 4327 hrs (recorded on meter at time of listing), s/n: M09795

COMPRESSOR SUPPORT EQUIPMENT

  • DOMNICK-HUNTER POLESTAR DRD325 refrigerated air dryer, s/n: 3762640001
  • THOMPSON GORDON TG500 refrigerated air dryer, s/n: 86G343
  • (2) ULTRA AIR UA1000A0 refrigerated air dryers with 100 PSI, s/n: U-029801, n/a
  • MFG. UNKNOWN desiccant air dryer, s/n: n/a
  • (2) GARDNER DENVER CTS60 ELIMINATOR II oil/water separators
  • SEPURA SEP900ST water separator

FACTORY SUPPORT EQUIPMENT

  • CANABLAST blast system with CANABLAST M-3648-P shot blast cabinet, CANABLAST PRM-16 dust collector with CANABLAST DC-160 reclamation unit, s/n: n/a
  • ECONOLINE shot blast cabinet with 120 max. PSI, s/n: n/a
  • ECONOLINE shot blast cabinet with 120 max. PSI, cyclone & dust collector, s/n: n/a

CONVENTIONAL MACHINE TOOLS

  • BRIDGEPORT SERIES I vertical milling machine with 42"x9" table, speeds to 4200 RPM, SHARS power feed, MITUTOYO DRO, s/n: J258296
  • CY MAGNUM-CUT FEL-26120GCY gap bed engine lathe with 26" swing over bed, 120" between centers, 4.25" spindle bore, speeds to 1120 RPM, inch/metric threading, 12" 3 jaw chuck, steady rests, coolant, s/n: 800201659
  • MANLEY 40 ton H-frame shop press, s/n: 83546411B
  • ENERPAC 4.5 ton (10,000 PSI) hydraulic H-frame shop press, s/n: n/a
  • HOTSY APW 7660 automatic parts washer with rotary table, s/n: C0506-62704
  • METALAS SENIOR 125T parts washer with rotary table, s/n: C1044
  • RIDGID 300 pipe threader with tri-stand, threading heads, attachments, pipe cutter and dies

FORKLIFTS

  • CLARK C500-Y135 LPG outdoor forklift with 13,500 lb. capacity, 206" max. lift height, 3 stage mast, pneumatic tires, fully enclosed cab, fan, heater, 84" forks, 6,376 hrs (as recorded on meter at time of listing), s/n: Y1015-63-4005
  • HYSTER H80XM LPG forklift with 7,390 lb. capacity, 121" max. lift height, 2 stage mast, side shift, pneumatic tires, 8,248 hrs (recorded on meter at time of listing), s/n: K005D06093Y

BLOWERS, MOTORS, PUMPS & MROs

  • MILROYAL MC1-M40-D141 metering pump with 54.5 GPH capacity, 1440 PSI, s/n: C14663-1
  • (2) MILROYAL MB1-M42-D140 metering pumps with 27.6 GPH capacity, 1500 PSI, s/n: C14663-3, C14663-4
  • PLENTY MIRRLEES HEA90-3NL pump with 1150 RPM, 120 PSI, 1819 USGPM, s/n: 35064
  • GARDNER DENVER INDUSTRIAL 45 SERIES blower with 4000 max. RPM, s/n: S472769
  • ROOTS 95P universal RAI blower with 1-3/8" output shaft, s/n: 95P68512
  • ROOTS MODEL 412 ram blower with 1.5" output shaft, s/n: 0507912073
  • (3) DEAN PH2111 1X1.5/2X8 centrifugal pumps with 1750 RPM, 275 PSI, s/n: 178104, 177722, 177721
  • (2) THERMAL TRANSFER AA65-1 air compressor heat exchangers/aftercoolers
  • TOSHIBA 100 HP electric motor with 1770 RPM, 575V, 3 PH, 60 HZ
  • GOULDS 360 PSI centrifugal pump with 15 HP electric motor with 3550 RPM, 575V, 3 PH, 60 HZ
  • SUTORBIT GARDNER DENVER GACLBRA blower with 3600 RPM, s/n: S491383
  • SUTORBILT GARDNER DENVER GAFLDRA0225 air end with 2350 RPM, s/n: S415064

VEHICLES

  • DODGE (2014) RAM service van with 3.6L V6 gas engine, automatic transmission, power steering, power locks, power windows, cruise control, CD & AM/FM radio, A/C, 208,626 km (recorded on odometer at time of listing), VIN: 2C4JRGAG0ER339532
  • CHEVROLET (2010) SILVERADO 1500 pickup truck with 4.3L V6 gas engine, automatic transmission, manual windows, manual locks, AM/FM radio, A/C, extended cab, RWD, toolbox, VIN: 1GCSCPEX9AZ296969
  • CHEVROLET (2003) SILVERADO 1500 pickup truck with 4.3L V6 gas engine, automatic transmission, manual windows, manual locks, AM/FM radio, A/C, RWD, VIN: 1GCEC14V63Z235124

ALSO:

GARDNER DENVER compressor air ends; GARDNER DENVER, WALKER & DOMNICK HUNTER in-line filters; 48"X60"X84"H paint booth; fork extensions; (4) 5000 lb. pallet jacks; come-a-longs & chain falls; lifting equipment including SLINGS, CHAINS, EYEBOLTS & SHACKLES; (10+) drums of BLOCKBUSTER industrial degreaser; HUSKY 4.6 gal. portable shop compressor; MOTOMASTER portable shop compressor; appliances, file cabinets, office furniture AND MORE!

LIVE WEBCAST ONLY


Westron Ontario 4 Westron Ontario 4 Westron Ontario 4 Westron Ontario 4 Westron Ontario 4 Westron Ontario 4 Westron Ontario 4 Westron Ontario 4 Westron Ontario 4 Westron Ontario 4 Westron Ontario 4

Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com