Tennessee Furniture Inc.

Custom Wood & Metal Furniture Fabricator

 

Date

Tuesday, July 28, 2015

Start Time

1:00 PM EDT

Inspection

Tuesday, July 28, 2015 from 8:00 A.M. to start of auction.

Removal

Small items: Wednesday, July 29 by 5:00 P.M.
Remaining items: Tuesday, August 4 by 5:00 P.M.

Industry

Woodworking
 

 

http://www.bidspotter.com/en-us/auction-catalogues/corporateassets/catalogue-id-corpor10094

SHORT NOTICE SALE! CUSTOM WOOD & METAL FURNITURE FABRICATOR FEATURING: Large Assortment of horizontal tube and pipe benders, horizontal and vertical saws, OBI and gap frame presses, welders and welding accessories, sanding and polishing equipment, angle rolls, TOYOTA forklifts, COMPLETE WOODWORKING DEPARTMENT consisting of belt sanders, routers, aluminum sliding table saws, shapers, planers, edge banders, paint booths, LARGE METAL, WIP & WOOD RAW MATERIAL INVENTORY, air compressors, adjustable pallet racking, shop presses, perishable tooling, power tools, factory support equipment and MUCH MORE!

LIGHT GAUGE WELDING AND FABRICATING

  • MFG UNKNOWN 4" angle rolls, s/n n/a
  • CONTINENTAL HYDRAULICS 2" hydraulic pipe and tube bender with digital microprocessor control, s/n n/a
  • ROUSELLE 2G C-frame punch press, s/n n/a
  • JOHNSON OBI punch press, s/n n/a
  • BROWN BOGGS punch press, s/n n/a
  • BLISS #20 punch press, s/n n/a
  • (2) COMAMET T30 OBI punch presses, s/n 3237, 4486
  • BAWDEN #2 OBI punch press, s/n n/a
  • PROGRESS floor type combination sander/polisher/buffer, s/n n/a
  • DIJON mechanical ironworker, s/n n/a
  • ROTO CLONE TYPE N size 2000 hydrostatic precipitator, s/n NN930038
  • (2) MILLER DELTAWELD 451 constant voltage DC MIG welder with cables and gun, s/n KE584436; KA902411
  • MILLER CP200 MIG welder with cables and gun, s/n CR109763
  • MILLER CP300 MIG welder with cables and gun, s/n n/a
  • MILLER CP200 MIG welder with cables and gun, s/n CR109763
  • HOBART  FABSTAR 2620 MIG welder with cables and gun s/n: n/a
  • THERMAL ARC FABSTAR 2620 MIG welder with cables and gun, s/n n/a
  • COBRA SAW 10" vertical roll-in band saw, s/n n/a
  • CAROLINA LDC712 metal cutting horizontal band saw, s/n n/a (BRAND NEW ON ORIGINAL SKID)
  • WALTERS 10" cold cut saw, s/n n/a
  • MFG UNKNOWN 50 ton electro hydraulic  H-frame shop press, s/n n/a
  • MFG UNKNOWN 5 HP tank mounted piston type air compressor, s/n n/a
  • COURT INDUSTRIES 15 HP tank mounted piston type air compressor, s/n  n/a
  • AIR BOSS 5 HP tank mounted piston type air compressor, s/n  n/a
  • GC GENERAL COMPRESSORS 5 hp tank mounted piston type air compressor, s/n n/a
  • ULTRA AIR refrigerated air dryer, s/n n/a
  • ULTRA AIR refrigerated air dryer s/n n/a

WOODWORKING EQUIPMENT

  • ROCKWELL 14-RAS 14" radial arm raw, s/n FE-8289
  • WADKIN 350BRA 14" radial arm raw, s/n 822008
  • DELTA 36-650 10" professional table saw with bag type dust collector, s/n 010824Q
  • POITRAS 10" professional table saw with bag type dust collector, s/n n/a
  • SCM T130 table router with power feed, s/n 050208
  • PROGRESS 6"x 108" profile edge sander, s/n n/a
  • SCM F3A 12" horizontal planer, s/n 0602013
  • GRIGIO PSA630 25" planer, s/n n/a
  • (2) KING INDUSTRIAL KC-10DS 10" professional table saws, s/n 99013264; n/a
  • TIMESAVERS TOR30-V 30" speed belt sander, s/n 3769
  • GRIGIO G800 pin router, s/n 095
  • DELTA 32-350 horizontal boring machine with CRAFTEX twin bag dust collector, s/n RL00918
  • LEVIGALTECNICA SRRN/MINI 41" twin head speed belt sander, s/n 558
  • SAMCO 6" stroke sander with CRAFTEX bag type dust collector, s/n n/a
  • SCM BASIC1 edge bander, s/n n/a
  • BLUM MINIPRESS multi spindle drill with pneumatic clamping, s/n n/a
  • MSW MAGIC sliding table saw, s/n n/a
  • MEBER 700 vertical band saw, s/n 1543
  • SCM MINI MAX (2004) S315WS sliding table saw, s/n KK072569

MISCELLANEOUS

  • TOYOTA 5FGC15 2800 lbs cap LPG forklift with 185" reach, 3 stage mast, side shift, cushion tires, s/n n/a
  • (2) 140"x96"x128" open sided paint booths, s/n n/a

ALSO:

(2) MASTERCRAFT bench type drill presses; KING 6" double end bench grinder; CRISTALLUX pneumatic press; RYOBY 4"x6" combination belt and disc sander; TRADEMASTER 14" floor type drill press; (2) BUFFALO 18" floor type drill press; large selection of manual pipe and rod benders; 36" bench type manual rolls; (2) floor type buffer/polishers; (30+) sections of medium duty ready rack; large selection of raw materials; particle board and hard wood; steel tube, round, flat and bar stock; cantilever racking; hand tools, power tools, specialized carpentry tools, sewing machines; work in process and MUCH MORE!

ONSITE & ONLINE


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all onsite bidders and 18% for all Webcast (Remote) bidders will apply at this sale.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com