SMG Inc.

Complete Hydromat & Screw Machine Shop

 

Date

Thursday, April 16, 2020

Start Time

10:30 AM EDT

Inspection

BY APPOINTMENT ONLY. Please email info@corpassets.com to set a date and time.

Removal

All assets must be removed BY APPOINTMENT ONLY no later than Tuesday, April 28. Please email info@corpassets.com to arrange a date and time.

Industry

Machining
 


 

*IMPORTANT NOTE REGARDING THE AUCTION*
We are doing our best to ensure our staff and customers are as safe as possible. If you wish to inspect the assets, we ask that you make an appointment so we may take necessary precautions to maintain health and safety protocols. Please maintain your distance between yourself and others and please DO NOT attend if you are experiencing any symptoms of illness or have been exposed to someone who has, or have travelled outside of Canada in the last month.
If you wish for more information but cannot or do not wish to travel, we would be happy to provide an inspection via video and have someone available to answer any questions you may have. Please contact our office at 416.962.9600 or email info@corpassets.com for more details.  (Please allow 24 hrs for a response.)

FEATURING: HYDROMAT (R&R by HYDROMAT 2006) HB 45-16 rotary transfer machine with ALLEN BRADLEY PANELVIEW 600 PLC digital microprocessor control; HYDROMAT HB 45-12 rotary transfer machine with digital microprocessor control; (3) HYDROMAT HW 25-12 rotary transfer machines; ACME GRIDLEY RA6 1 ¼ universal automatic screw machine; ACME GRIDLEY RA6 1 universal automatic screw machine; NEW BRITAIN GRIDLEY 2 1/4 universal automatic screw machine; (8) DAVENPORT ¾” MODEL B universal automatic screw machines; BROWN&SHARPE #2 ULTRAMATIC R/S 1 5/8” four slide universal automatic screw machine; LEBLOND 15x45 DUAL DRIVE tool room engine lathe; BRIDGEPORT SERIES vertical turret milling machine; DOALL 1612-0 16x12 vertical band saw; BRIERLEY ZB50 tool and cutter grinder; AGATHON 150-A tool and cutter grinder; INTERSOURCE 510-3508 automatic chip processing system; BARRETT centrifugal chip separator; Assortment of HYDROMAT spare 30 and 40 SERIES units ,valves, tool heads, repair parts, machining heads, collets, flanges, pulleys, milling heads, slotting heads, threading heads, broaching heads; SELECTION of screw machine attachments including slotting, milling, pick-off, back drilling, thread rolling, straddle milling, cross drilling and threading attachments; QUANTITY of cams, collets, gears, tool holders and repair parts; BOWDEN cabinet type aqueous parts washer; inspection & QC equipment, ROCKWELL hardness tester; assortment of power, pneumatic, hand tools and MORE!

THE EXCLUSIVE RIGGER FOR THIS SALE IS:

Martin Beaulieu
2105, Onésime-Gagnon, Lachine, Québec. H8T 3M7
Tel.: 1.450.565.5644 / 1.800.340.5644
mbeaulieu@extranscargo.com / www.extranscargo.com

ROTARY TRANSFER MACHINES

  • HYDROMAT (R&R by HYDROMAT 2006) HB 45-16 rotary transfer machine with ALLEN BRADLEY PANELVIEW 600 PLC digital microprocessor control, 1.77” max work piece diameter, 4.5” max work piece length capacity, configured as follows: Pos 1: cut off saw, Pos 2: 36-100, Pos 3: 40-80 unit, Pos 4: 30-60 unit, Pos 5: 40-80, Pos 6: 30-60, Pos 7: inverter 40 series, Pos 8: 40-80, Pos 9: 40-80, Pos 10: 40-80, Pos 11: 40-80, Pos 12: 36-100, Pos 13: 30-60, Pos 14: 30-60, Pos 15: 36-100, Pos 16: 30-60 unit, ST100 control valves on all units, high pressure clamping, bar feeder, 480v/3ph/50-60hz, coolant, chip conveyor, work platform, s/n 030381-1
  • HYDROMAT HB 45-12 rotary transfer machine with digital microprocessor control, 1.77” max work piece diameter, 6.00” max work piece length capacity, configured as follows: Pos 1: 40 series cut off saw, Pos 2: 20 series vertical with platform, Pos 3: blank, Pos 4: 30 series vertical milling with platform, Pos 5: 30 series milling, Pos 6: 40 series inverter with electronic valve, Pos 7: 30 series open, Pos 8: 40 series turning, Pos 9: 40 series turning, Pos 10: 30 series open, Pos 11: 30 series drill, Pos 12: 30 series drill, high pressure clamping, newer bar feeder, 87hp, 380v/3ph/50-60hz, coolant, chip conveyor, work platform, s/n 210788-51
  • HYDROMAT HW 25-12 rotary transfer machines with push button pendant control, 1.00” max work piece diameter, 4.00” max work piece length capacity, configured as follows: Pos 1: 20 series quick release cut off saw, Pos 2: 30 Series turning, Pos 3: 30 series turning, Pos 4: 30 series open, Pos 5: 20 series open, Pos 6: 30 series inverter, Pos 7: 30 series turning, Pos 8: 30 series turning, Pos 9: 30 series turning, Pos 10: 30 series turning, Pos 11: 20 series open, Pos 12: 20 series open, high pressure clamping, bar feeder, step loading, coolant, chip conveyor, work platform, 220v/3ph/50-60hz, s/n 150290-380
  • HYDROMAT HW 25-12 rotary transfer machines with push button pendant control, 1.00” max work piece diameter, 4.00” max work piece length capacity, configured as follows: Pos 1: 20 series cut off saw, Pos 2: 20 Series vertical with platform, Pos 3: 30 series open, Pos 4: 20 series vertical drilling with platform, Pos 5: 20 series milling, Pos 6: 20 series inverter, Pos 7: 30 series turning, Pos 8: 30 series turning, Pos 9: 20 series drill, Pos 10: 30 series open, Pos 11: 30 series drill, Pos 12: 20 series drill, (3) wired tool breakage detectors, high pressure clamping, bar feeder, step loading, coolant, chip conveyor, work platform, 220v/3ph/50-60hz, s/n 28481-79
  • HYDROMAT HW 25-12 rotary transfer machine with push button pendant control, 1.00” max work piece diameter, 4.00” max work piece length capacity, configured as follows: Pos 1: quick release cut off saw, Pos 2: 20 Series turning, Pos 3: blank, Pos 4: blank, Pos 5: 20 series inverter, Pos 6: 30 series turning, Pos 7: 30 series open, Pos 8: 30 series open, Pos 9: 30 series open, Pos 10: 20 series open, Pos 11: 30 series turning, Pos 12: 20 series drill, (4) wired tool breakage detectors, high pressure clamping, bar feeder, step loading, coolant, chip conveyor, work platform, 220v/3ph/50-60hz, s/n 161280-64

SCREW MACHINES

  • ACME GRIDLEY RA6 1 ¼ universal automatic screw machine with max 1.25” working diameter, 6.00” max working length, with threading, pneumatic pick-off, back finishing, coolant, chip conveyor, 440v/3ph/50-60hz, s/n 71463
  • ACME GRIDLEY RA6 1 universal automatic screw machine with max 1.00” working diameter, 6.00” max working length, coolant, chip conveyor, 440v/3ph/50-60hz, s/n A23966
  • NEW BRITAIN GRIDLEY 2 1/4 universal automatic screw machine with max 2.25” working diameter, threading, pick off, coolant, chip conveyor, 440v/3ph/50-60hz, s/n 26442
  • (8) DAVENPORT MODEL B universal automatic screw machines with ¾” capacity, 2.25” max working length, tamers, coolant, 440v/3ph/50-60hz, s/n 8161; 3428; 2446; 9406; 10453; 8122; 3781; 3249
  • BROWN & SHARPE #2 ULTRAMATIC R/S universal automatic screw machine with 1 5/8” capacity, four slide, coolant, 230v/3ph/50-60hz, s/n 542-2-8554

CONVENTIONAL MACHINE TOOLS

  • LEBLOND DUAL DRIVE tool room engine lathe with 15” swing, 45” between centers, speeds to 1800 rpm, 575v/3ph/50-60hz, s/n HC580
  • BRIDGEPORT SERIES vertical turret milling machine with 9” x 42” table, speeds to 4200 rpm, power table feed, R8, 575v/3ph/50-60hz, s/n 121230
  • DOALL 1612-0 vertical band saw with 16” throat, 12” max work piece height, blade welder and grinder, 220v/3ph/50-60hz, s/n 209-671555
  • BRIERLEY ZB50 universal tool and cutter grinder with dual heads, chuck, s/n n/a
  • AGATHON 150-A double end pedestal tool and cutter grinder, s/n 1063-3712

FACTORY SUPPORT EQUIPMENT

  • INTERSOURCE 510-3508 automatic chip processing system with chip wringer, auger conveyor, centrifugal separator, controls and integration, s/n 35111D
  • BARRETT centrifugal chip separator with gantry hoist load-unload system, s/n n/a

ALSO:

Assortment of HYDROMAT spare 30 and 40 SERIES units ,valves, tool heads, repair parts, machining heads, collets, flanges, pulleys, milling heads, slotting heads, threading heads, broaching heads; SELECTION of screw machine attachments including slotting, milling, pick-off, back drilling, thread rolling, straddle milling, cross drilling and threading attachments; QUANTITY of cams, collets, gears, tool holders and repair parts; BOWDEN cabinet type aqueous parts washer; inspection & QC equipment, ROCKWELL hardness tester; assortment of power, pneumatic, hand tools and MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com