Late Model CNC Machining & Fabricating Event

CNC Bridge Mills, Large Capacity Machining Centers & More!

 

Date

Wednesday, August 25, 2021

Start Time

10:00 AM EDT

Inspection

BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange a date and time.

Removal

All assets must be removed no later than Thursday, September 9 BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange.

Location

GTA, Windsor & Montreal

Industry

Fabricating | Machining
 

MACHINING
 

FEATURING: PARPAS ML130, 4-Axis CNC floor type horizontal boring mill w/ Travels: X-354”, Y-118”, Z-51”, W-29.5”; TARUS GDTTC510-6XRT-P, 6-Axis CNC gundrill; TARUS TPTCGD 508S, 3-Axis CNC gundrill; KAO-MING (2013) KMC-318HIS, CNC gantry type vertical machining center; FIRST (2008) MCV-2000, CNC gantry type vertical machining center; FORTWORTH (2012) HB-800A, CNC table type horizontal boring mill; AWEA (2012) BM-2100, large capacity CNC vertical machining center; OKUMA MC-600H CNC multi-pallet horizontal machining center with OKUMA OSP7000M CNC control, 25”x25” pallets, travels X-39.37”, Y-31.50”, Z-29.53”, W-360 positions in 1 degree increments, CAT 50 spindle taper, 25 HP main spindle motor, 72-station ATC, coolant through spindle, chip conveyor, (6) pallet pool system with APC automatic pallet changer, 220-440V/3PH/60HZ, s/n: 0376; FIRST (2008) MCV1000, CNC vertical machining center; FIRST (2006) V43, CNC vertical machining center; FADAL VMC 2216, CNC vertical machining center; FIDIA DIGIT 16, high speed CNC vertical machining center; SURE FIRST DM-860, ram-type EDM; SURE FIRST ZPNC-408, ram-type EDM; (5) FIRST vertical milling machines, some w/ power feeds & drawbars; KAO MING KMR-1100S, radial arm drill; (4) CHEVALIER & HARIG surface grinders; CLAUSING (2003) COLCHESTER 15”, engine lathe; FAMAR (2008) CPI 25/5, 10’ x /25” hydraulic plate bending rolls; SAKAMURA BP-440, 4-Die 4-Blow ½” capacity parts former; WATERBURY FARREL #5, 6-Die 7-Station 1 1/8” capacity parts former; NATIONAL 45ALS, 1-Die 2-Blow ¼” capacity cold header & MORE!

EXCLUSIVE RIGGER FOR THIS SALE:

National Rigging and Transportation
Darren Chapman
O: 905-788-1110 | C: 905-704-9011
darren@nationalrigging.com

For everyone’s safety removal at this site is conducted strictly by appointment only. All machinery buyers must contact 905-704-9011 or by email darren@nationalrigging.com to set their pick-up appointments upon payment in full.

*Machinery with a designated (CI) but without a rigging fee listed in the description will not have an exclusive rigger. Successful buyers will be responsible for the removal of their assets.

CNC GANTRY TYPE HIGH SPEED VERTICAL MACHINING CENTERS

  • KAO MING (2013) KMC-318HIS, CNC double column high speed vertical machining center with FANUC SERIES 31i-MODEL B CNC control, 65” x 118” T-slot table, travels: X-127”, Y-66”, Z-33”, speeds to 10,000 RPM, CAT 50 taper, 60 station ATC, spindle oil chiller, chip conveyor, through spindle coolant, s/n 313HS003 (Located in Toronto, ON)
  • FIRST (2007) MCV-2000, CNC high speed bridge type vertical machining center with FANUC SERIES 18i-MB CNC control, 39.37” x 86.5” T-slot table, travels: X-80”, Y-44”, Z-27”, speeds to 15,000 RPM, BT40 taper, 30 station ATC, spindle oil chiller, chip auger and conveyor, s/n 60600042 (Located in Toronto, ON)

CNC HIGH SPEED VERTICAL MACHINING CENTERS

  • FIDIA DIGIT 165-C1 CNC vertical machining center with FIDIA C1 CNC control, 55”x35” table with 3,300 lbs. max. table load capacity, travels: X – 31.5”; Y – 23.5”; Z – 19.5”, 25.75” max. distance spindle nose to table top, speeds to 22,000 RPM, HSK-50E spindle taper, 15 station ATC, 16 HP, coolant, AIRFLOW SYSTEMS DCH1-BI-HOPPER-PG10 1.5 HP dust collection unit (MAY BE SOLD SEPARATELY), s/n: D165.083 (Located in Windsor, ON)
  • FADAL 904-1 CNC vertical machining center with FADAL CNC88HS CNC control, 39.5”x16” table, travels: X – 30”; Y – 16”; Z – 20”, speeds to 10,000 RPM, CAT 40 spindle taper, 21 station ATC, 15 HP, coolant, s/n: 9809864 (Located in Windsor, ON)
  • AWEA (2012) BM-2100, CNC large capacity vertical machining center with MITSUBISHI M70 CNC control, 39.37” x 90.5” T-slot table, travels: X-82”, Y-39”, Z-39”, speeds to 6000 RPM, CAT 50 taper, 24 station ATC, spindle oil chiller, chip conveyor, through spindle coolant, s/n 2100-11007 (Located in Toronto, ON)
  • FIRST (2008) V-43, CNC high speed vertical machining center with FANUC SERIES 18i-MB CNC control, 23.62” x 51.12” T-slot table, travels: X-43”, Y-23”, Z-20”, speeds to 15,000 RPM, BT 40 taper, 24 station ATC, spindle oil chiller, chip conveyor, RENISHAW tool probe system, through spindle coolant, s/n 70100114 (Located in Toronto, ON)
  • FIRST (2006) MCV-1000, CNC high speed vertical machining center with FANUC SERIES 18i-MB CNC control, 19.62” x 45.25” T-Slot table, travels: X-40”, Y-20”, Z-20”, speeds to 10,000 RPM, BT 40 taper, 24 station ATC, spindle oil chiller, chip auger, s/n 40700441 (Located in Toronto, ON)

CNC MULTI-PALLET HORIZONTAL MACHINING CENTER

  • OKUMA MC-600H CNC multi-pallet horizontal machining center with OKUMA OSP7000M CNC control, 25”x25” pallets, travels X-39.37”, Y-31.50”, Z-29.53”, W-360 positions in 1 degree increments, CAT 50 spindle taper, 25 HP main spindle motor, 72 station ATC, through spindle coolant, chip conveyor, (6) pallet pool system with APC automatic pallet changer, 220-440V/3PH/60HZ, s/n: 0376 (Located in Montreal, QC)

CNC TABLE TYPE HORIZONTAL BORING MILL

  • FORTWORTH (2012) HB-800A, CNC table type horizontal boring mill with 39.37” x 39.37” T-slot rotary table, Travels: X-78”, Y-47”, Z-47”, FANUC SERIES Oi-MD CNC control, 6000 RPM, CAT 50 taper, 60 ATC, oil temperature control unit, chip conveyor, thru spindle coolant, s/n 8027 (Located in Toronto, ON)

CNC FLOOR TYPE HORIZONTAL BORING MILL

  • PARPAS ML-130/9000 CNC floor-type horizontal boring/milling machine with SIEMENS SINUMERIK CNC control, 6.3” diameter spindle, CAT 50 spindle taper, 118” vertical head travel (Y axis), 354” column travel (X axis), 27.6” spindle travel (W axis), 59” rotary table linear travel, speeds to 1800 RPM, 70 HP main drive motor, chip conveyor, coolant, through-spindle coolant system with paper-type filtration system, removable CNC controlled universal milling head with 144 positions at 2.5 deg. (A axis 45 deg.) and 144 positions at 2.5 deg. (C axis) (MAY BE SOLD SEPARATELY), 196”x98 t-slot extension table (MAY BE SOLD SEPARATELY), s/n: SE630R03.0 (Located in Windsor, ON)

6-AXIS CNC DUAL SPINDLE GUN DRILL

  • TARUS (2008) GDTTC510-6XRT-P 6 axis CNC dual spindle travelling column type gun drill with TARUS CNC control, 60” x 72” table with 48” diameter infinite position 360 degree imbedded magnetic rotary table, travels: Z – (vertical travel) 60”; W (spindle travel) – 96”, 2” spindle, CAT 50 taper milling head, coolant, chip conveyor, tilting headstock with +/- 15 degree positions, s/n: GDCART2576002413 (Located in Windsor, ON)

3-AXIS CNC GUN DRILL

  • TARUS TPTCGD508S 3 axis CNC table-type gun drill with TARUS CNC control, 60” x 96” table, travels: X – (table travel) Y –(column travel) 30”; 96”; Z – (vertical travel) 60”; W – (spindle travel) 84”, 2” spindle, speeds to 3400 RPM, 15 HP, coolant, chip conveyor, s/n: TPTCGDCNC1321026293 (Located in Windsor, ON)

CONVENTIONAL MACHINE TOOLS

  • (4) FIRST (2011-2012) LC-185VS, vertical milling machines with HEIDENHAIN DRO’s, s/n NA (Located in Toronto, ON)
  • KAO MING (2006) KMR-1100S, 3’ radial arm drill with 12” column, 3HP motor, s/n NA (Located in Toronto, ON)
  • HARIG 612, surface grinder, s/n NA (Located in Toronto, ON)
  • CHEVALIER FSG-618M, surface grinder, s/n A3828072 (Located in Toronto, ON)
  • SURE FIRST (2002) ZPNC 408, ram type sinker EDM with SYSTEM 3R tooling, CNC control, s/n 0042653 (Located in Toronto, ON)

MATERIAL HANDLING EQUIPMENT

  • CROWN (2004) RD5220-30 36V electric deep reach truck with 3000 lb. capacity, 225” max. lift height, 8224 drive hrs (recorded on meter at time of listing), 36V battery charger, s/n: 1A275457 (Located in Mississauga, ON)
  • RAYMOND (2002) EZACT R40TT 36V electric reach truck with 4000 lb. capacity, 268” max. lift height, 10,730 hrs (recorded on meter at time of listing), 36V battery charger, s/n: EZ-A-02-22871 (Located in Mississauga, ON)
  • CROWN (2011) SH5520-40 24V electric walk-behind pallet stacker with 4000 lb. capacity, 128” max. lift height, 2082 hrs (recorded on meter at time of listing), built-in 120V charger, s/n: 6A288744 (Located in Mississauga, ON)
  • BIG JOE (2007) PDM30-154 12V electric walk-behind pallet stacker with 3000 lb. capacity, 154” max. lift height, 778 hrs (recorded on meter at time of listing), battery charger, s/n: 382292 (Located in Mississauga, ON)
  • BIG JOE (2006) PDM30-130 12V electric walk-behind pallet stacker with 3000 lb. capacity, 130” max. lift height, 510 hrs (recorded on meter at time of listing), battery charger, 378629 (Located in Mississauga, ON)
  • JUNGHEINRICH EMC B10 24V electric walk-behind pallet stacker with 2200 lb. capacity, 64” max. lift height, built-in 120V charger, s/n: 90469294 (Located in Mississauga, ON)
  • RAYMOND (2008) 8400 24V ride-on electric pallet jack with 6000 lb. capacity, 2947 hrs (recorded on meter at time of listing), 24V battery charger, s/n: 840-08-76240 (Located in Mississauga, ON)
  • RAYMOND (2006) 8400 FRE60L 24V ride-on electric pallet jack with 6000 lb. capacity, 3736 hrs (recorded on meter at time of listing), 24V battery charger, s/n: 840-06-70638 (Located in Mississauga, ON)
  • RAYMOND (2000) 101T F40L 24V electric walk-behind pallet jack with 4500 lb. capacity, 783 hrs (recorded on meter at time of listing), built-in 120V charger, s/n: 101-00-12470 (Located in Mississauga, ON)
  • RAYMOND (2008) 5200 OPC 24V electric order picker with 3000 lb. capacity, 210” max. lift height, 4050 hrs (recorded on meter at time of listing), 24V battery charger, s/n: 520-08-02483 (Located in Mississauga, ON)
  • CROWN (2008) WAV50-118 24V electric order picker with 550 lb. capacity, 118” max. lift height, 1918 hrs (recorded on meter at time of listing), built-in 120V charger, s/n: 9A1509352 (Located in Mississauga, ON)
  • CROWN (2009) WAV50-118 24V electric order picker with 550 lb. capacity, 118” max. lift height, built-in 120V charger, s/n: 9A164842 (NOT IN SERVICE) (Located in Mississauga, ON)

ALSO:

Large selection of CAT 50 tooling; Gundrill tooling; Set of (2) 84”x36” heavy duty angle plates; Set of (2) 72”x36” angle plates; LISTA type tool cabinets; Workbenches; CLAUSING (2003) COLCHESTER 15”, engine lathe; FAMAR (2008) CPI 25/5, 10’ x .25” hydraulic plate bending rolls; SAKAMURA BP-440, 4-Die 4-Blow ½” capacity parts former; WATERBURY FARREL #5, 6-Die 7-Station 1 1/8” capacity parts former; NATIONAL 45ALS, 1-Die 2-Blow ¼” capacity cold header & MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com