Husky Flooring

Major Late Model Hardwood Flooring Facility

 

Date

Wednesday, September 9, 2020

Start Time

10:30 AM EDT

Inspection

BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange a date and time.

Removal

All assets must be removed no later than Tuesday, October 20 by appointment only.

Industry

Woodworking
 


 

FEATURING: Complete (2001) Lumber Line (Planing, Grading & Sticking) consisting of: Infeed conveying systems, 30” NEWMAN planer, primary & secondary trim saws, (7) strand grading deck & sticker / (2017) stacking systems etc.; Complete Lumber Gang Rip Line consisting of: Infeed conveying systems, BROOKHUIS moisture analysing system, LICO gang rip saw, PICHE trim saw & CFS (2013) optimizing saw etc.; Complete OSI/PICHE/WEINIG Line consisting of: Infeed conveying systems, (8) stand transfer deck, WEINIG (2012) POWERMAT 2020 (6) spindle B,R,L,T,T,B moulder, (5) PICHE up-acting saw stations, OSI 10’ capacity end-matcher & (5) nesting / bundling stations etc.; Complete UNION TOOL Engineered Flooring Line consisting of: UNION TOOL glue spreader, GRACO glue pumping system, UNION TOOL (2015) flooring press, WEINIG (2011) HYDROMAT 2000 (7) spindle B,B,T,R,L,R,L moulder, BARR-MULLIN turbo saw, DOUCET up-acting saw & OSI end matching line etc.; Complete Late Model Blade Grinding Department consisting of: WEINIG (2005) comparator, WINTERSTEIGER (2016) blade grinder & WINTERSTEIGER (2012) tension master unit etc.; ENERGIE F.E.I Inc. (5) compartment dry kiln; JUSTSEN ENERGITEKNIK (2000) high efficiency boiler system; WINTERSTEIGER (2017) notum frame saw; WINTERSTEIGER (2006) sonic frame saw; (2) DOUCET up-acting saws; HOLYTEK (2007) up-acting saw; (5) AKEBOND oval strappers; HOLYTEK table saw; VALLEE (PURCHASED NEW IN 2017 FOR $250K CAD) 4DA27C 27,500lbs capacity articulating 4x4 rough terrain diesel forklift; VALLEE 4DA20TL 22,000lbs capacity articulating 4x4 rough terrain diesel forklift; TOYOTA 5,800 lb LPG forklift; HYSTER 5,000 lb LPG forklift; HYSTER 4,950 lb electric forklift; RC TRAILERS (2017) TRA/REM 3,000 lbs capacity single axle enclosed utility trailer; RODRIGUE horizontal wood grinder; Large Assortment Of general factory support equipment, spare parts department, maintenance and machining departments, outdoor storage building, material handling equipment & MUCH MORE!

HARDWOOD & ENGINEERED HARDWOOD FLOORING PRODUCTION LINES

HUSKY C-P semi-automatic engineered hardwood flooring production line consisting of:

  • WEINING (2011) HYDROMAT 2000 (7) head automatic profile moulder in B,B,T,R,L,R,L configuration with WEINING touch screen CNC control, 9”x6.25” capacity, speeds to max 260 fpm, 10,000rpm spindles, full sound enclosure, s/n 115663
  • WINTERSTEIGER (2017) DSG NOTUM 5600-400 precision thin cutting frame saw with OMRON PLC control, 10.5” max cutting height, 0.04” min cutting kerf, power infeed conveyor, s/n 5600-4017-0129
  • WINTERSTEIGER (2006) DSG SONIC 5700-01-53 precision thin cutting frame saw with OMRON PLC control, 10.5” max cutting height, 0.04” min cutting kerf, power infeed conveyor, s/n 5700-2006-0030
  • (6) DOUCET DM-416-G up acting manual trim saws, s/n n/a
  • HOLYTEK (2009) HCS-18RH up acting trim saw, s/n 0705
  • HOLYTEK JOTS-12R table saw with KING 550V power feed, s/n 3050008
  • GRACO THERM-O-FLOW 200 twin pump hot glue system with GRACO microprocessor control, max 3000 psi output @ 400 deg F, s/n TOFC-200E15P2M2P1
  • UNION TOOL CO continuous through type hot glue spreader with 13” rolls, s/n n/a
  • UNION TOOL CO continuous through type linear roll press with 14” rolls, speeds to 100 fpm, s/n n/a
  • RAPISTAN 12”W x 20’L powered roller conveyor, s/n n/a
  • (2) MFG UNKNOWN approx. 36”W x 20’L powered belt conveyors, s/n n/a
  • BMI TURBO WONDER SAW automatic high-speed defect trim saw with optical detector, s/n n/a
  • OSI MACHINERIES tongue & groove automatic trim system with LOGITEX digital microprocessor control, 6”x5’ power in-feed belt conveyor, 8’x8’ powered belt accumulator conveyor; twin opposing OSI male & female groovers, outfeed belt conveyor with 4’x16’ powered belt accumulator table, s/n n/a

 

OSI-WEINING-PICHE semi-automatic hardwood flooring production line with sorting 6-side milling, grading and packaging operations consisting of:

  • WEINIG (2004) POWERMAT 2020 (6) head high speed automatic moulder in B,R,L,T,T,B configuration with digital microprocessor control, 9”x6.25” capacity, speeds to max 260 fpm, 10,000rpm spindles, full sound enclosure, s/n 101506
  • OSI E SERIES DCA-101 feeder assembly with bin tipper, hopper feeder with approx. 16’ width, powered incline chain descrambler, powered belt conveyor, s/n 5281-01
  • OSI E SERIES approx. 14’W x 6’L powered chain driven incline descrambler table, s/n n/a
  • OSI E SERIES approx. 10’W x 30’L powered chain driven horizontal accumulator table with buffer gates, s/n 5281-07
  • OSI heavy duty grooved roll hydraulic feeder with top & bottom drive, OHV hydraulic power pack, s/n 5281-09
  • PICHE approx. 8”W x 26’L horizontal powered belt conveyor, s/n n/a
  • PICHE approx. 8’W x 42’L (2) lane powered accumulator table, s/n n/a
  • (6) PICHE up-acting manual trim saws, s/n n/a
  • OSI approx. 8’W x 38’L index in-feed table with JRT AUTOMATISATION controls, s/n n/a
  • OSI horizontal end groover, s/n n/a 
  • OSI horizontal end groover, s/n n/a
  • OSI approx. 8’W x 12’L (5) lane automatic diverter indexer with pneumatic gates, s/n n/a
  • OSI (5) lane horizontal powered belt conveyor, s/n n/a
  • (5) OSI approx. 4’W x 20’L horizontal powered accumulator conveyors, s/n n/a
  • OSI (5) station manual grading system with (3) grade stack, power elevating belt conveyor, reject scrap conveyor, s/n n/a
  • OSI outfeed strapping and packaging station with roller conveyor, s/n n/a
  • JRT AUTOMATISATION CONTROLS PLC controls with operator consoles, control panels, safety interlocks and integration, s/n n/a

GREEN&DRY HARDWOOD LUMBER PROCESSING LINES

PICHE NEWMAN-WHITNEY (INSTALLED 2016) semi-automatic green hardwood processing line with sorting, planning, trimming, grading and sticker stacking operations consisting of:

  • NEWMAN-WHITNEY S-382 double roughing lumber planer with 30” max width capacity, speeds to 300 fpm, 30”x6” feed opening, 3/8” min stock thickness, 48” min stock length, helical carbide cutting heads, hydraulic driven pneumatic wheel in-feed/out-feed, twin 40hp drive motors, PICHE electric driven grooved roll out-feed, s/n n/a
  • PICHE BJ1-1 approx. 24’x12’ (4) lane horizontal chain driven in-feed conveyor with electric drive motor, s/n n/a
  • PICHE bundle loader with 12’L x 6.5’W bundle size capacity, (3) hammer pneumatic bundle breaker, s/n n/a
  • TS MANUFACTURING hopper descrambler with approx. 18’ width, powered incline chain descrambler, gravity sticker separator with bottom discharge and rejects conveyor, s/n n/a
  • PREDIMACH (2016) 34PI approx. 7’W x 13’L power incline chain driven sticker descrambler and approx. 57”W x 30’L powered horizontal chain driven outfeed bin conveyor, s/n P001440
  • PICHE approx. 24”W x 26’L powered horizontal belt conveyor, s/n n/a
  • PICHE hopper descrambler with approx. 18’ width, powered incline chain descrambler, top roll reject side discharge, s/n n/a
  • PICHE 6-13 approx. 18’W x 32’L (7) lane horizontal chain driven accumulator table with manual turn & positioning station, pneumatic actuated gates, powered roll out-feed, electric drive motor, s/n n/a
  • PICHE 6-17 approx. 18’W x 60’L grading system consisting of PICHET (7) lane chain driven accumulator conveyor; PICHET hopper descrambler with approx. 18’ width, powered incline chain descrambler; PICHET (8) lane chain driven accumulator table with manual sorting station, pneumatic actuated buffer gates, (2) circular end trim saws, powered roll out-feed, electric drive motors, (4) lane gravity grading stations with belt out-feed conveyors, (4) graded wood holding bins for 6’, 8’, 10’, 12’ lengths with live bottom and chain driven powered incline out-feed descrambler conveyors, s/n n/a
  • PICHE approx. 24”W x 30’L powered horizontal belt conveyor, s/n n/a
  • PICHE approx. 13’W x 50’L sorting and sticker-stacking system consisting of PICHET hopper descrambler with approx. 18’ width; PICHET (8) lane chain driven accumulator table with pneumatic buffer gates, manual sticker-stacking station; hydraulic bundle lift; bundle out feed powered chain drive conveyor, s/n n/a
  • TELEMECANIQUE PLC controls with (4) operator consoles, control panels, safety interlocks and integration, s/n n/a

 

COMMONWEALTH PLYWOOD semi-automatic dry hardwood trimming and grading line with sorting, moisture control, trim and grade operations consisting of:

  • PICHE C-P approx. 24’x12’ (4) lane horizontal chain driven in-feed conveyor with electric drive motor, s/n n/a
  • PICHE bundle loader with approx.14’L x 6.5’W bundle size capacity, s/n n/a
  • C-P hopper descrambler with approx. 14’ width, powered incline chain descrambler, gravity sticker separator with bottom discharge rejects conveyor, s/n n/a
  • C-P approx. 7’W x 13’L power incline chain driven sticker descrambler and stacker conveyor with approx. 57”W x 30’L powered horizontal chain driven outfeed bin conveyor, s/n n/a
  • C-P hopper descrambler with approx. 14’ width, powered incline chain descrambler, s/n n/a
  • PICHE approx. 10’W x 55’L (6) lane horizontal chain driven accumulator table with (2) manual defect trim stations with circular saws, pneumatic actuated buffer gates, BROOKHUIS 683ICE digital moisture analyzer with automatic rejects discharge, electric drive motor, PROLOGIC laser measuring scanner, s/n n/a
  • PICHE grooved roll hydraulic power feeder, s/n n/a
  • LICO ¾-4” X 36” (5) blade gang rip saw with 200 HP drive motor, dynamic hydraulic blade positioning, s/n n/a
  • PICHE approx. 24”W x 20’L saw out-feed belt conveyor with automatic rejects discharge, s/n n/a
  • C-P hopper descrambler with approx. 14’ width, powered incline chain descrambler, s/n n/a
  • PICHE approx. 10’W x 30’L (8) lane powered chain driven accumulator table conveyor with manual defect trim station with circular saw, laser scanner, s/n n/a
  • PICHE approx. 12’W x 50’L gravity grading system with (10) bin discharge, pneumatic drop gates, s/n n/a
  • BEAUCE CONTROL PLC controls with operator consoles, control panels, safety interlocks and integration, s/n n/a

FORKLIFTS

  • VALLEE (PURCHASED NEW IN 2017 FOR $250K CAD) 4DA27C 27,500lbs capacity articulating 4x4 rough terrain diesel forklift with 168” max vertical reach, double pneumatic tires, full cab enclosure with heat, camera assist, approx. 5125 hours recorded on meter at the time of listing s/n 217QSB45214MR-2
  • VALLEE 4DA20TL 22,000lbs capacity articulating 4x4 rough terrain diesel forklift with 168” max vertical reach, double pneumatic tires, full cab enclosure with heat, s/n 99JD6068D21428E4
  • TOYOTA 8FGCU30 5,000lbs capacity LPG forklift with 187” max vertical reach, 3-stage high visibility mast, side shift, cushion tires, 5317 hours recorded on meter at the time of listing, s/n 20213
  • HYSTER J60XM-34 5,000lbs capacity electric forklift with 181” max vertical reach, 3-stage high visibility mast, side shift, 48 volt battery, 459 traction hours recorded on meter at the time of listing, s/n A216A05495Z
  • HYSTER J60XM-34 5,000lbs capacity electric forklift with 181” max vertical reach, 3-stage high visibility mast, side shift, 48 volt battery, XXX traction hours recorded on meter at the time of listing, s/n A216A05489Z
  • PBM REACTOR 48 volt, 200 amp automatic battery charger, s/n 2008D
  • RC TRAILERS (2017) TRA/REM 3,000 lbs capacity single axle enclosed utility trailer with side door, rear fold-down ramp door, s/n VIN 56VBE1210HM636411

DRYING KILN & BIOMASS STEAM BOILER

  • JUSTSEN ENERGIE F.E.I. (2000) biomass steam boiler with 18,800 lbs/hr @ 50 psi mawp capacity, 2160 sqft heating surface, JUSTSEN 14.4 biomass feeder/burner, AEROFLO stainless steel exhaust stack, ENERGIE F.E.I. precipitator with rotary valve and ash bin, MAGNUS feed water de-ionizing system, condensate tank and pumps, s/n 3787
  • RODRIGUE METAL large capacity saw dust holding bin with cyclonic type receiver, hydraulic draw live bottom and auger screw discharge conveyor, hydraulic power pack, s/n n/a
  • ENERGIE F.E.I 5-section large capacity steam heated turbulent type forced air wood drying kiln, s/n n/a

SCRAP HANDLING SYSTEM

  • VIBROTECH approx.18”W x 30’L vibratory shaker conveyor, s/n n/a
  • PATZ MODEL 400 hook & eye chain link rejects conveyor, s/n n/a
  • RODRIGUE METAL LH308-22 150hp wood hog, s/n 30362
  • RODRIGUE METAL outdoor pad type central cyclonic type dust collector system with 150hp main blower, 40hp transport blower, s/n n/a
  • CONCEPTAIR outdoor pad type central cyclonic type dust collector system with 75hp main blower, 60hp recirculation blower, 25hp transport blower, s/n n/a

BLADE GRINDING DEPARTMENT

  • WEINIG (2008) RONDAMAT 960 precision tool & cutter grinder, s/n 112174
  • WEINIG (2005) 970095 OPTI-CONTROL optical comparator, s/n 102909
  • WINTERSTEIGER (2016) MICROGRINDER 34 240 SW-550HT thin cut frame saw precision blade grinder, s/n 58-120-841-240
  • WINTERSTEIGER (2016) TENSIONMASTER 5835 thin cut frame saw pre-setter, s/n 5835-4095

FACTORY & PLANT SUPPORT EQUIPMENT

  • INGERSOLL RAND SSR-EP75 75hp rotary screw type air compressor with digital microprocessor control, 332cfm @ 125psi capacity, 2900 hours recorded on meter at the time of listing, s/n CK3806U00304
  • COMPAIR HYDROVANE 25hp turbine air compressor, s/n 1825
  • PARAMEC MDX 100 refrigerated air dryer with 100 cfm @ 232 psi capacity, s/n n/a
  • COMPAIR AIRTEK refrigerated air dryer with 520 cfm @ 125 psi capacity, s/n n/a
  • (2) BEKO oil water separators, s/n n/a
  • (2) 240gal capacity air receiver tanks, s/n n/a
  • (2) DELANEY 200lbs capacity freestanding jib arm with 10’ span, 360-degree rotation, pneumatic balancer attachment, s/n 5656
  • PLYMOVENT MFC-1200 snorkel type portable welding fume extractor, s/n 9901311
  • MILLER CST 250 portable welder with cables and gun, s/n n/a
  • (6) GERRARD OVALSTRAPPING 415 automatic through type strapping machines with 18”x24” max opening, s/n n/a
  • (2) BLUE GIANT hydraulic scissor lift tables, s/n n/a
  • DESJARDINS 4360liter capacity outdoor contained diesel storage tank with FILL-RITE metered dispensing pump and gun, s/n 88

ALSO:

LARGE QTY of WEINING molder tooling including conventional and carbide insert cutting heads, right angle cutting heads, feed drive rolls and tooling LARGE SELECTION of CARBIDE tipped saw blades, MAKITA portable air compressor, KING POWERFORCE 10,000 watt gas powered portable generator, TROY-BILT gas powered snow blower, (5+) DEWALT & MAKITA sliding compound miter saws, RIDGID & DEWALT heavy duty portable table saws with stand, (2) STIHL MS461 gas powered chainsaws, rolling tool boxes and cabinets, hand tools, power and pneumatic tools, hydraulic hand pump kits, shop fans and ladders; (2) strapping caddies, (10+) dumping hoppers, (2) KING drill presses; DEWALT abrasive cut-off saw, PRO-PRESS 50ton capacity hydraulic H-frame shop press, s/n n/a

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com