Surplus to the Ongoing Needs of

Bulldog Tool & Extrusions Ltd.

Plastic Extrusion & Light Machining Facility

 

Date

Tuesday, September 15, 2015

Start Time

1:30 PM EDT

Inspection

Monday, September 14 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction.

Removal

Small items: Wednesday, September 16 by 5:00 P.M.
Remaining items: Tuesday, September 29 by 5:00 P.M.

Industry

Machining
 

 

http://www.bidspotter.com/en-us/auction-catalogues/corporateassets/catalogue-id-corpor10096

PLASTIC EXTRUSION & LIGHT MACHINING FACILITY FEATURING: (2) DELTAPLAST 2.5” single screw plastic extruders; DELTAPLAST plastic co-extruder; Assortment of pullers, shears, cooling conveyors, punch presses, granulator, CLARK forklift, surface grinders, HERCULES engine lathe, (2) vertical milling machines, vertical and horizontal saws, sanding equipment, air compressors, shop tables and cabinets, perishable tooling, PLASTIC RESIN INVENTORY, strapping equipment and MORE!

PVC PROFILE EXTRUSION LINES

  • DELTAPLAST-METALPLAST PVC profile extrusion line consisting of: DELTAPLAST D6525024 screw type PVC profile extruder with 2" max cap, 40HP drive, (4) independent barrel heat zones, (3) independent die heat zones, gravity fed pellet hopper feeder, s/n W01291285; DELTAPLAST DVH3012524 portable PVC profile extruder with 1.25" max cap, 5HP drive, (3) independent barrel heat zones, (1) independent die heat zone, gravity fed pellet hopper feeder, s/n W01301285; (2)MFG UNKNOWN 11' cooling conveyors with electric blowers; METALPLAST PB4C variable speed puller with DRO; MFG UNKNOWN pneumatic punch press; METALPLAST MST-4 automatic flying head up acting saw; 15' X 17" drop table; s/n n/a (MAY BE OFFERED AS COMPONENTS)
  • DELTAPLAST PVC profile extrusion line consisting of: DELTAPLAST D6525024 screw type PVC profile extruder with 2" max cap, 40HP drive, (4) independent barrel heat zones, (3) independent die heat zones, gravity fed pellet hopper feeder, s/n W01581086; (2)MFG UNKNOWN 11' cooling conveyors with electric blowers; MFG UNKNOWN variable speed puller with DRO; MFG UNKNOWN pneumatic punch press; MFG UNKNOWN through type continuous heat transfer labeler with cut-off; 15' X 17" drop table; s/n n/a (MAY BE OFFERED AS COMPONENTS)

PRODUCTION SUPPORT & MAINTENANCE EQUIPMENT

  • HYD-RECLAIM 25HP plastic re-grinder with dust collector, s/n n/a
  • SULLAIR 10B-25 25HP screw type air compressor, s/n 10988
  • GENERAL COMPRESSOR 5HP tank mounted piston type air compressor, s/n n/a
  • SAG 14 HERCULES tool room lathe with 20" swing, 38" centers, 2" bore, speeds to 1500 RPM, taper attachment, in/mm threading, coolant, s/n n/a
  • TOPWELL 4VK vertical turret milling machine with 10" x 50" table, speeds to 4200 RPM, 3 HP, power table feed, s/n 898444
  • WELLS INDEX vertical turret milling machine with 9" x 46" table, speeds to 2800 RPM, 1.5 HP, power table feed, MITUTOYO 2 axis DRO s/n n/a
  • ELB SCHLIFF SW6VA1 hydraulic surface grinder with 24" x 8" magnetic chuck, incremental down feed, coolant, s/n 11760558
  • TAFT PEIRCE 5" X 10" manual surface grinder s/n n/a
  • POWERMATIC B7 vertical band saw with blade welder and grinder, s/n 67-7868
  • BAXTER VERTICUT 115B roll in vertical band saw s/n n/a
  • CLARK C500-45LPG 4500 lbs cap LPG forklift with 130" reach, 2 stage mast, cushion tires, s/n 251HP

ALSO

DELTA ROCKWELL combination 4" belt, 12" disc sander; BALDOR 8" double end grinder; (2) SAMUEL automatic strapping machines; DAKE #3 heavy duty pedestal arbor press; (3) AZIMUTH & ALVAF ALLEN mechanical punch presses; DEWALT miter saw; EMPIRE sand blast cabinet with cyclonic media recycling; 10' x 10" stainless steel portable water cooling bath tank; assortment of work benches with vises; tool cabinets; assortment of dies; PVC pellets and raw materials; EAGLE hydraulic pallet truck and MUCH MORE!

ONSITE & ONLINE


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all onsite bidders and 18% for all Webcast (Remote) bidders will apply at this sale.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com