Acroturn Industries Inc.

Late Model & Multi-Axis Aerospace Machining Facility

 

Date

Tuesday, June 23, 2020

Start Time

10:30 AM EDT

Inspection

BY APPOINTMENT ONLY. Please email info@corpassets.com to arrange a date and time.

Removal

All assets must be removed no later than Friday, July 17 by appointment only.

Industry

Machining
 


 

FEATURING: KITAMURA (2011) MyCENTER HX400iF, high speed CNC twin pallet horizontal machining center w/ 13,000 RPM, FANUC 16i-MB CNC control, ATC, etc.; (2) HYUNDAI KIA (EST 2009) SKT250TTSY, CNC multi-axis, opposed spindle and twin turret live milling centers equipped with MISTBUSTERS, tool probes, FANUC 18i-TB CNC controls, etc. (REPLACE OVER 300K NEW EACH - MANY LIVE MILLING HOLDERS AVAILABLE FOR EACH MACHINE); HYUNDAI WIA (2014) KIT-250, high precision CNC gang style turning center; FORTUNE V-TURN 26, CNC turning center w/ MISTBUSTER, FANUC CNC control, etc.; HYUNDAI (2003) SPT V500 D, 4 axis CNC twin pallet vertical machining center; HYUNDAI (2001) SPT-V550D, 4 axis CNC twin pallet vertical machining center; HYUNDAI 4 axis CNC dial type vertical machining center; LARGE ASSORTMENT OF high precision carbide and conventional tooling, machine tool accessories, CNC rotary axis units, inspection equipment, general machining support assets, facility support assets & MORE!

CNC TURNING & LIVE MILLING CENTERS

  • HYUNDAI KIA (2009) SKT250TTSY CNC multi-axis, opposed spindle twin turret live milling and turning centers equipped with FANUC 18i-TB CNC controls, (2) 10” hydraulic chucks, 30.70” swing over bed, 15.35” maximum turning diameter, 35.43” maximum machining length, 2.99” bar capacity, travels X1-10.63”, X2-7.48”, Y-4.72” (+/- 2.36”), C1/C2-360,000 positions in 0.001 degree increments, (2) 12-station turrets with live milling, 4,000 main spindle RPM, 4,000 sub spindle RPM,  20 HP spindle motor, coolant, chip conveyor, tool checker arm, MISTBUSTER mist collector, (200-220V/3PH/50-60HZ) s/n: G3737-0006
  • HYUNDAI KIA (2009) SKT250TTSY CNC multi-axis, opposed spindle twin turret live milling and turning centers equipped with FANUC 18i-TB CNC controls, (2) 10” hydraulic chucks, 30.70” swing over bed, 15.35” maximum turning diameter, 35.43” maximum machining length, 2.99” bar capacity, travels X1-10.63”, X2-7.48”, Y-4.72” (+/- 2.36”), C1/C2-360,000 positions in 0.001 degree increments, (2) 12-station turrets with live milling, 4,000 main spindle RPM, 4,000 sub spindle RPM,  20 HP spindle motor, coolant, chip conveyor, tool checker arm, MISTBUSTER mist collector, (200-220V/3PH/50-60HZ), s/n: G3737-0021

CNC TWIN PALLET HORIZONTAL MACHINING CENTER

  • KITAMURA (2011) MyCENTER HX400iF high speed CNC twin pallet horizontal machining center with FANUC 16i-MB CNC control, (2) 15.7”x15.7” pallets, travels X-28.9”, Y-24.0”, Z-24.0”, W-360,000 positions in 0.001 degree increments, 26” maximum distance spindle center to table top, speeds to 13,000 RPM, CAT40 spindle taper, 50-station ATC, 20 HP spindle motor, shower & high pressure coolant through spindle, chip conveyor, (200-220V/3PH/50-60HZ), s/n: 82025

CNC TWIN PALLET VERTICAL MACHINING CENTERS

  • HYUNDAI (2001) SPT-V550D 4 axis CNC twin pallet vertical machining center with SIEMENS CNC control, (2) 25.59”x16.14” pallets, travels X-22.44”, Y-16.14”, Z-22.83”, W-360,000 positions in 0.001 degree increments, 30.59” maximum distance spindle nose to table top, speeds to 10,000 RPM, CAT40 spindle taper, 24-station ATC, 16 HP spindle motor, coolant, chip tray, 220V/3PH/50-60HZ, s/n: 4491B028
  • HYUNDAI (2003.12) SPT V500D 4 axis high speed CNC twin pallet vertical machining center with SIEMENS SINUMERIK CNC control, (2) 37.5”x24” pallets, travels X-20.48”, Y-14.17”, Z-11.81”, W-360,000 positions in 0.001 degree increments, speeds to 13,000 RPM, BT30 spindle taper, 16-station ATC, coolant, chip tray, (220V/3PH/50-60HZ), s/n: 4400D063
  • HYUNDAI SPT-V30T 4 axis CNC vertical machining center with HYUNDAI CNC control, 23.62”x14.96” table size, travels X-19.68”, Y-11.81”, Z-11.81”, W-360,000 positions in 0.001 degree increments, speeds to 8,000RPM, BT30 spindle taper, 14-station ATC, 5 HP spindle motor, chip tray, 220V/3PH/60HZ, s/n: 70D7033

CNC HIGH PRECISION GANG TYPE TURNING CENTER

  • HYUNDAI WIA (2014) KIT-250 high precision CNC gang style turning center with FANUC i series CNC Control, 5.3” chuck, 12.6” swing over bed, 6.3” maximum turning diameter, 5.9” maximum turning length, 1.3” bar capacity, 1.65” spindle bore, travels X-9.8”, Z-7.9”, 4-station block tool, speeds to 7,000 RPM, 5 HP spindle motor, coolant, chip tray, (220V/3PH/60HZ), s/n: G3724-0448

CNC TURNING CENTER

  • FORTUNE VTURN-26 CNC turning center with FANUC Oi-TB CNC control, KITAGAWA B-212 12" 3-jaw hydraulic chuck, 26.37" swing over bed, 14.56" maximum turning diameter, 24.40" centers, 3.38" spindle bore, travels X-18.94", Z-19.00", 12 station turret, speeds to 3500 RPM, hydraulic tailstock, coolant, chip conveyor, MISTBUSTER mist collector, (220V/3PH/50-60HZ), s/n: UC-3029

FORKLIFTS & PALLET TRUCKS

  • RAYMOND (2008) 8400, 24v Electric Ride-On Pallet Truck with 6000lb capacity. Includes Battery and Oldham Charger. s/n 840-08-75998 (Unit# 2325)
  • RAYMOND (2003) EZ-R40TT, 24v Electric Reach Truck with 4000lb capacity. Includes Battery and VPII Charger. s/n ET-D-03-12639 (Unit# 2396)
  • RAYMOND (2005)  C40-R40TT, 36v Electric Stand on Counterbalance Truck with 4000lb capacity. Includes Battery and GNB Charger. s/n R40-05-08765 (Unit# 2460)
  • RAYMOND (2001) OPC30TT, 24v Order Picker Truck with 3000lb capacity. Includes Battery and VPII Charger. s/n EASi- 01-BC27682 (Unit# 2690)
  • RAYMOND (2010) 8400, 24v Electric Ride-On Pallet Truck with 6000lb capacity. Includes Battery and GNB Charger. s/n 840-10-84375 (Unit# 2705)
  • RAYMOND (2009) C35TT, 48v 3 Wheel Counterbalance Fork Lift with 3500lb capacity. Includes Battery and C&D Charger. s/n 440-09-10678 (Unit# 2711)
  • RAYMOND (2011)  8400, 24v Electric Ride-On Pallet Truck with 8000lb capacity. Includes Battery and C&D Charger. s/n 840-11-89154 (Unit# 2712)
  • RAYMOND (1998) R40TT, 36v Electric Reach Truck with 4000lb capacity. Includes Battery and Vulcan Charger. s/n EZ-A-98-10025 (Unit# 2716)

ALSO:

LARGE ASSORTMENT OF perishable tooling including carbide and conventional tooling, turning tools, live milling tool holders, CAT tool holders, machine tool accessories, CNC rotary table 4th axis units, inspection equipment, general machining and plant support assets, factory equipment and MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com