Tooling Technologies Inc.

Multi-Million Dollar Precision Machining Event!

 

Date

Tuesday, August 26, 2014

Start Time

10:00 AM EDT

Inspection

Monday, August 25 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction.

Removal

Small items: Wednesday, August 27 by 5:00 P.M.
Remaining items: Friday, September 12 by 5:00 P.M.

Industry

Machining | Plastics
 

 

http://www.bidspotter.com/en-us/auction-catalogues/corporateassets/catalogue-id-corpor10043

FEATURING: FPT (2004) DINO EVOLUTION 5 axis fixed portal type CNC machining center; FPT (2005) STINGER 6 axis fixed portal type CNC machining center; HNK (2000) HB 130C, 5.122” CNC 4 axis table type HBM; (2) KURAKI (1996) KTB 11 WA CNC 4 axis table type HBM’s; HYUNDAI (1998) Hi-B110 CNC 4 axis table type HBM; REIS (1998) TUS 130-100, 100 ton die spotting press with tilting platen and shuttle table; FERROMATIK MILACRON (2000) MM 1100-140, 1000 ton plastic injection molder with only 2500 HOURS!; TECNIDRILL (2014 RETROFIT) CNC column type gun drilling machine; (2) OKK MCV 660 CNC VMC’s; OKK (2001) DGM 400 high speed CNC VMC; OKK MCV 520 CNC VMC; FADAL VMC 3016 CNC VMC; CLAUSING /COLCHESTER (1997) CNC 4000 lathe; (3) WEBB 5VK CNC vertical milling machines; MITSUBISHI TFA 20 wire type EDM; (5) INGERSOLL & ELOX ram type sinker EDM’s; OKAMOTO ACC 28-60 EX MDI surface grinder; (10) hydraulic and manual surface grinders; (3) engine lathes; (7) vertical milling machines; (2) CATERPILLAR forklifts up to 14,000 lb capacity; TENNANT 5700 electric floor scrubber; FREIGHTLINER (2002) M2 flatbed truck with only 117,000 miles; DODGE (2003) RAM 2500 4 wheel drive pickup with only 63,000 miles; ALSO: granite surface plates up to 126” X 66 ½ “ X 10”, angle plates up to 60” X 24” chop saws, rotary tables, vises, huge assortment of tool holders, inspection tools, LISTA tool cabinets & work stations, perishable tooling, raw material inventory, office equipment, business machines and MUCH MORE!

FIXED PORTAL FIVE AXIS CNC MACHINING CENTERS

  • FPT (2004) DINO EVOLUTION 5 axis fixed portal type CNC machining center with HEIDENHAIN HE 530 SP CNC control, 118" X 47.2" table, travelsl; X-110.2", Y-86.6", Z-39.4", 6600 lbs max table load, 56.3" between columns, 47.2" max under cross beam, TULCE TVS 10 2 axis direct drive planetary head, speeds to 18000 RPM, HSK 63 taper, 30 ATC, high pressure coolant, chip conveyor s/n DV2804042
  • FPT (2005) STINGER 5 axis fixed portal type CNC machining center with HEIDENHAIN HE 530 SP CNC control, 47.2" X 39.4" rotary table w/ .001º min. table index,, travels; X-68.9", Y-55", Z-24", 17636 lbs max table load, 65" between columns, 8.1" – 31.7" table surface to spindle nose, TULCE 2 axis direct drive planetary head, speeds to 22000 RPM, HSK 63 taper, 30 ATC, high pressure coolant, chip conveyor s/n SV1705014

CNC BORING MILLS

  • HNK (2000) HB 130 C CNC table type HBM with FANUC 16 M CNC control, 5.122" spindle,  118" x 55" table, 55" x 55"  built in rotary table, travels: X –118.2", Y – 78.8", Z – 51.22",  W – 27.58",  22000 lbs max table load, CAT 50 spindle taper, 40 ATC, speeds to 2500 RPM, 34.86 HP spindle motor,  .001º min. table index, coolant, chip conveyor s/n 00016
  • KURAKI KTB 11 WA CNC table type HBM with FANUC 16 M CNC control, 4.33" spindle,  55.16" x 47.28" rotary table, travels: X –66.98", Y – 49.25", Z – 45.31",  W – 19.68",  14330 lbs max table load, CAT 50 spindle taper, 40 ATC, speeds to 3000 RPM, 20 HP spindle motor,  .001º min. table index, coolant, chip conveyor s/n 4202
  • KURAKI KTB 11 WDXA CNC table type HBM with FANUC 15 M CNC control, 4.33" spindle,  63.04" x 55.16" rotary table, travels: X –78.8", Y – 59.1", Z – 57.13",  W – 25.61",  14330 lbs max table load, CAT 50 spindle taper, 40 ATC, speeds to 2500 RPM, 20 HP spindle motor,  .001º min. table index, coolant, chip conveyor s/n 3220
  • HYUNDAI Hi-B110 CNC table type HBM with FANUC 15 M CNC control, 4.33" spindle,  63.04" x 55.16" rotary table, travels: X –78.8", Y – 59.1", Z – 57.13",  W – 25.61",  14330 lbs max table load, CAT 50 spindle taper, 40 ATC, speeds to 2500 RPM, 20 HP spindle motor,  .001º min. table index, coolant, chip conveyor s/n QF0045

PLASTICS EQUIPMENT

  • FERROMATIK MILACRON (2000) (ONLY 2500 APPROX HOURS!) MM 1100-140 plastic injection molder with CINCINNATI MILACRON CAMAC XTREEM ST PLC control, 1100 ton clamping force, 82.7" X 61.2" platens, 60.2" X 45.3" between tie bars, 78.7" clamp stroke, 11.8" ejector stroke, 94.5" max. daylight, 144 oz shot s/n H32A020000I
  • CUMBERLAND 484 granulator with 16" opening s/n 421000-91503
  • AEC PSA15 portable chiller s/n 30E0417
  • AEC WHITLOCK WD 90 desicant dryer with DH hopper, SLC autoloader s/n 31C0426
  • (2) AEC TCU300 water temperature controllers s/n 30E5600, 30E5601
  • DME 12 zone temperature controller

CNC GUN DRILL

  • TECHNIDRILL (2000) 100-1250-10-Q-3A-CNC-72-48-60-72X606 CNC  column type gun drilling machine with  (2014 retrofit) LEMOINE G6 CNC control, .125"-1.250" drilling cap., 72" x 60" table, travels; (column travel) X-72", (spindle vertical travel) Y-48", (drilling stroke) Z-60", 150000 lb. max. table load, speeds to 5400 RPM,  auxiliary counter bore, tapping & milling head, chip conveyor, high pressure coolant, 10 HP spindle drive s/n 7206-01/00

CNC MACHINING CENTERS

  • (2) OKK MCV 660 CNC VMC with NEOMATIC 635 CNC control, 67" X 25.5" table, travels: X – 59", Y – 26", Z – 25 ", 33.46" maximum distance spindle nose to table top, spindle speeds to 4500 RPM, CAT 50 taper, 4 ATC, 25 HP, coolant, chip conveyor s/n 470, 160
  • OKK (2001) DGM 400 high speed CNC VMC with NEOMATIC 635 CNC control, 30.32" X 17.72" table, travels: X – 22.05", Y – 16.14", Z – 16.14 ", 22.05" maximum distance spindle nose to table top, spindle speeds to 30000 RPM, BT 30 taper, 16 ATC, 10 HP, TORIT 7.5 HP dust collector s/n 131
  • OKK MCV 520 CNC VMC with FANUC OM CNC control, 51 3/16" X 21 5/8" table, travels: X – 40 5/32", Y – 20 15/32", Z – 22 18/16 ", 30" maximum distance spindle nose to table top, spindle speeds to 3500 RPM, CAT 50 taper, 30 ATC, 15 HP, coolant, chip conveyor s/n 1023
  • FADAL VMC 3016 CNC VMC with FADAL control, 39" X 20" table, travels: X – 30", Y – 16", Z – 20 ", 24" maximum distance spindle nose to table top, spindle speeds to 8000 RPM, CAT 40 taper, 21 ATC, 20 HP, coolant, s/n 9307577

CNC MILLING MACHINES

  • (3) WEBB 5VK CNC vertical milling machine with PROTO TRAK M2 control, 10" X 50" table, 5 HP head, power draw bar s/n 867140, 834607, 867139

CNC LATHE

  • CLAUSING /COLCHESTER CNC 4000 lathe with GE FANUC O-T CNC control, 21.8" swing, 32.67" in gap, 80" between centers, 3.54" bore, 8 station tool turret, speeds to 1800 RPM, tailstock, s/n 4C0038

ELECTRICAL DISCHARGE MACHINES

  • MITSUBISHI TFA 20 wire type EDM with MITSUBISHI CNC control, travels X -_13.7", Y-19.6", Z-11.8", U- 1.25", V-1.25" work tank dimensions 32" x 42" x 12", 1763 lbs. maximum workpiece weight , s/n F2R1311
  • INGERSOLL C462 CNC sinker type EDM with ROTRON 3T control, 102.44" X 49" X 16" tank, 98.5" X  37.43" table, travels; X- 39.4", Y- 17.73", 20000 lbs table load s/n 571577
  • INGERSOLL IG 1000 CNC sinker type EDM with INGERSOLL control, 38" X 29" X 35" tank,  travels; X- 27-186, Y- 31.1", Z-15.76", C axis s/n 571577
  • ELOX 8-26 sinker type EDM with 35" X 22" X 14" tank, 20" X 8" X 12" travels, ANILAM DRO s/n 052757
  • ELOX 8-2814 sinker type EDM with 48" X 22" X 14" tank, ANILAM DRO s/n 1694
  • ELOX ROYALE sinker type EDM with 35" X 24" X 19" tank s/n 063388

DIE SPOTTING PRESS

  • REIS TUS 130-100 die spotting press with 100 ton cap., 63" X 51" bed, 55" daylight opening, sliding & tilting table, tilting upper platten s/n 03 198 00

SURFACE GRINDERS

  • OKAMOTO ACC 28-60 EX MDI surface grinder with OKAMOTO PRECISION MDI control, 28" X 61" cap., 27" under a 20" dia. wheel, 5640 lbs. table cap., 20" X 3" X 8" wheel, wheel dresser s/n 37175
  • MITSUI 407 16" X 28" hydraulic surface grinder with wheel dresser, incremental downfeed, coolant s/n 493
  • OKAMOTO ACCUGAR-124N 12" X 24" hydraulic surface grinder with incremental downfeed, coolant s/n 6285
  • CHEVALIER FSG 1224AD 12" X 24" hydraulic surface grinder with wheel dresser, incremental downfeed, coolant s/n F186A002
  • (3) OKAMOTO 6-12 LINEAR manual surface grinders s/n 3769, 3771, 3772
  • CHEVALIER FSG 618M 6" X 18" manual surface grinder s/n A3806042
  • HARIG H 612 hydraulic surface grinder s/n 23342
  • HARIG SUPER 612 manual surface grinder s/n 16299

LATHES

  • WASINO 22/32” X 54” gap bed engine lathe with 2 .25” bore, speeds to 1800 RPM, threading s/n 5358
  • MORI SEIKI MH1500 24” X 60” engine lathe with 3.25” bore, speeds to 1200 RPM, theading, coolant, TRAK DRO s/n 2177
  • SOUTH BEND 12” X 24” tool room lathe s/n 20708R

MACHINE SHOP EQUIPMENT

  • DECKEL SO single lip cutter grinder with 4" diameter cup wheel, 5/8" cap., 45º max. grinding angle, 4500 RPM s/n 79-20038
  • POWERMATIC 1200 floor type pedestal drill press s/n 9-466
  • RIDGID 535 2 “pipe threader with stand s/n 403463
  • YOSHIDA YRD 1050 4’ radial arm drill with 12” column dia., speeds to 1800 RPM, tilting box table, coolant s/n 4412025
  • YASDA YBM 80J horizontal jig borer with 32” X 24” table, speeds to 2240 RPM, 24” X 24” rotary table, ANILAM DRO s/n 74-Y435
  • TMI HP 75 H frame hydraulic shop press with power pack
  • DEGEN (2001) TAM 25/600 ejector pin cut-off and face grinding machine with 1” max. dia, 24” max length s/n 2456

SAWS

  • ACRA (2003) KV-50 20” vertical band saw with blade welder & grinder s/n V501054
  • WELLS 1316 SWIVEL horizontal band saw with 13” X 16” cap. at 90º, 0º-60º swivel, nfeed conveyor, coolant s/n 6142
  • WELLS W9 9” X 17” dual column horizontal band saw s/n 803336

MILLING MACHINES

  • SUPERMAX YCM 16VS vertical milling with 9” X 50” table, 3 HP head s/n 86-07786
  • BRIDGEPORT SERIES 2 vertical milling with 9” X 42” table, 2 HP head, speeds to 4500 RPM, ANILAM DRO  s/n 211685
  • (4) BRIDGEPORT vertical milling with 9” X 42” table, 1.5 HP head, speeds to 4200 RPM, 7” riser  s/n 206037, 159253, 151378,175476
  • BRIDGEPORT vertical milling with 9” X 42” table, 1.5 HP head, speeds to 4200 RPM, s/n 210998

WELDERS

  • MILLER SYNCROWAVE 350 LX TIG welder with cables & gun s/n KJ220725
  • HOBART HANDLER 250 MIG welder s/n KK217675

MATERIAL HANDLING

  • CATERPILLAR T120C 14000 lbs. LPG forklift with 178” lift height s/n Z18N01438
  • CATERPILLAR GC 25K 4350 lbs. LPG forklift with 188” lift height, side shift s/n AT82D01403

FACTORY EQUIPMENT

  • TENNANT 5700 electric floor scrubber s/n 7401
  • strapping caddies, ladders, lifting accessories,

VEHICLES

  • FREIGHTLINER (2002) M2 flatbed truck with MERCEDES diesel engine, 6 speed transmission, 18’ flat deck, dual rear wheels, approx. 117,000 mi. VIN 1FVACXCS03HK20511
  • DODGE (2003) RAM 2500 4 wheel drive pickup truck with 5.7 litre HEMI, extended cab, western snow plow attachment,  approx 63000 miles VIN 1D7KU28D44J174420

ALSO:

Granite surface plates up to 126” X 66 ½ “ X 10”, angle plates up to 60” X 24”, chop saws, rotary tables, vises, huge assortment of tool holders, inspection tools, LISTA tool cabinets & work stations, perishable tooling, raw material inventory, office equipment, business machines and much more!

ONSITE & ONLINE


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com