Prescott Machine & Welding Inc.

Complete Fabricating Facility Closure

 

Date

Tuesday, October 9, 2018

Start Time

1:30 PM EDT

Inspection

Tuesday, October 9 from 8:00 A.M. to start of auction.

Removal

Small items: Wednesday, October 10 by 5:00 P.M.
Remaining items: Tuesday, October 23 by 5:00 P.M.

Industry

Fabricating
 


 

FEATURING: A large assortment of machining and fabricating equipment consisting of: Mechanical press brakes and shears; Engine Lathes; Horizontal and vertical saws; MIG & TIG Welders; Plasma cutters; Hydraulic angle rolls; Mechanical plate bending rolls; Hydraulic ironworkers; Hydraulic shop presses; Pines tube bender; Swagers; International flatbed boom truck; Assorted vehicles & forklifts; Backhoe; Storage Containers; Large offering of perishable tooling, machine tool accessories & More!

PRESSES

  • VERSON B-118 straight side press brake with 225 ton capacity, 126” overall bending length, 102” between housings, 6" stroke, 24 strokes/min, 14" shut height, 6" adjustment, s/n: 14353
  • VERSON straight side press brake with 45 ton capacity, 64” overall bending length, 44” between housings, s/n: n/a

SHEARS

  • NIAGARA mechanical shear with 10’ maximum cutting length, 3/8” capacity, power back gauge, 64” squaring arm, SICK safety light curtains, s/n: n/a

MILLS

  • SAJO URT-450 universal milling machine with 50 taper spindle, 72" x 18" t-slot table, speeds to 1100 RPM, s/n: 6816
  • HECKERT FU400VI universal milling machine with 40 taper spindle, 78" x 13" t-slot table, speeds to 1400 RPM, s/n: 32368887
  • PRVOMAJSKA turret milling machine with 40 taper spindle, 43”x12” t-slot table, speeds to 2760 RPM, power table, s/n: n/a

LATHES

  • ZMM C13MB gap bed engine lathe with 30" 4 jaw chuck, 38" swing over bed, 4" spindle bore, 199" between centers, speeds to 1000 RPM, steadies, s/n: C13B771555
  • ZMM CU502 gap bed engine lathe with 18" 4 jaw chuck, 23" swing over bed, 2.75" spindle bore, 122" between centers, speeds to 2000 RPM, steadies, coolant, s/n: 502300076110
  • ZMM CU401 gap bed engine lathe with 10" 3 jaw chuck, 21" swing over bed, 2.75" spindle bore, 62" between centers, speeds to 2000 RPM, steadies, coolant, s/n: 401150075806
  • MAS 165S tool room lathe with 6" 3 jaw chuck, 14" swing over bed, 1.5" spindle bore, 28" between centers, speeds to 2480 RPM, s/n: MP898

FABRICATION

  • HECKERT BR40/2X1250 5' radial arm drill with 28" x 28" x 19.5" t-slot box table, speeds to 1200 RPM, 54” column, s/n: 762697
  • HECKERT BS3AI gear head drill with 22”x18” table, speeds up 1200 RPM, s/n: 08025
  • BUFFALO 15 floor type drill press with speeds to 6300 RPM, s/n: n/a
  • OMERA MULTIMATIC/16S mechanical iron worker with 60 ton capacity, s/n: 775207
  • PIRANHA P3 mechanical iron worker with 50 ton capacity, 8” throat, open height 13.5”, 4.25” stroke, 60 strokes/min, s/n: P3-2599
  • PULLMAX Z31 angle rolls with horizontal and vertical capabilities, leg out angles 3”x3”x3/8” – min. diameter 36”, leg in angles 2.5”x2.5”x3/8” – min. diameter 48”, roll speeds to 10 RPM, s/n: n/a
  • MFG UNKNOWN 72" plate bending rolls, bends up to 3/8" plate, s/n: n/a
  • TELEDYNE PINES #1 horizontal tube and pipe bender with 1.5”x0.120” capacity, 1.5” max. tube diameter, 180 deg. max. bending angle, bending speed 17 RPM, s/n: 11235-61221
  • CHICAGO L-31 4' mechanical finger brake s/n: 95352
  • HECKERT SKW200X600 hydraulic surface grinder with ECLIPSE 8"x23.75" magnetic chuck, s/n: n/a
  • ELLIOT TOOL A.R.5-ELET drill cutter/grinder, s/n: n/a
  • CAROLINA CP1200 50 ton capacity h-frame shop press, s/n: 0801
  • (2) HYDMECH S-20 automatic horizontal band saws with 30”x14” cutting capacity, incremental down feed, coolant, s/n: 60199163, 20590610
  • STARTRITE H225 horizontal band saw with 20”x10” cutting capacity, s/n: 103139
  • POWERMATIC vertical band saw with 24”x24” table, 19.5” throat, 12” max. work height, blade welder, s/n: n/a
  • OSTER 784 pipe threader with ½” – 4” capacity, speeds to 51 RPM, s/n: 784-XZ-252
  • RIDGID 535 portable pipe threader, s/n: n/a

WELDERS

  • (3) MILLER TRAILBLAZER 302 CC/CV AC/DC gas powered welder/generators with digital display, 11,000 watts peak, 9,500 watts continuous, 25 HP, s/n: MB021444H, LJ400026Q, LJ460146Q
  • (2) MILLER BIG 40 CC DC diesel welder/generators, s/n: JE783479, JE805417
  • (2) MILLER DELTAWELD 452 CV DC MIG welders with MILLER 60 SERIES wire feed, cables & gun, s/n: KH353914, KH353843
  • (2) MILLER XMT350 CC/CV AUTOLINE MIG welders with MILLER 22A 24V wire feeder, cables & gun, s/n: LG320105A, LG320158A
  • LINCOLN ELECTRIC POWER WAVE 455 MIG welder with LINCOLN ELECTRIC POWER FEED digital wire feed, cables & gun, s/n: U1021008643
  • LINCOLN ELECTRIC INVERTEC V350-PRO MIG welder with LINCOLN ELECTRIC LF-72 wire feed, cables & gun, s/n: U1060600948
  • MILLER SYNCROWAVE 250DX digital TIG welder with cables & gun, s/n: n/a
  • MILLER SYNCROWAVE 250 TIG welder with cables & gun, s/n: n/a
  • LINCOLN ELECTRIC SQUAREWAVE TIG255 TIG welder with HOBART chiller, cables & gun, s/n: U1960910185
  • MILLER MP-65E arc welder with MILLER HD-1 wire feed, cables & gun, s/n: HH012739
  • MILLER SR-600 DC arc welder with cables & gun, s/n: F109108
  • (2) MILLER SRH-333 arc welders with cables & gun, s/n: n/a
  • MILLER CP-250-SM arc welder with cables and wire feed gun, s/n: CF12008
  • MILLER DIALARC 250 AC/DC arc welder, s/n: JC630297
  • MILLER CST250 portable TIG/stick welder with cables & guns, s/n: n/a
  • (2) LINCOLN ELECTRIC IDEALARC 250 arc welders with cables & gun, s/n: 104148, n/a
  • HOBART MC-500 arc welder with cables & gun, s/n: 16DW-20486
  • AIRCO 2DCR-S 245 arc welder with cables & wire feed gun, s/n: n/a
  • THERMAL DYNAMICS CUTMASTER 38 portable plasma cutter with cables & gun, s/n: n/a
  • (2) THERMAL DYNAMICS THERMAL ARC PAK 10XR plasma cutters with cables & gun, s/n: n/a
  • THERMAL DYNAMICS THERMAL ARC PAK 5XR plasma cutter with cables & gun, s/n: n/a
  • UNION CARBIDE CM60 coordinate drive shape 2 head cutting machine with LINATROL HL-7 tracing head, 72" plate width, 60" tracing table width, 60" cutting range, 13'1" cutting length, 65.5" x 121" cutting table, s/n: n/a
  • (3) NEDERMAN flex arm fume extractors with blowers
  • PANDJIRIS REEVES 25 welding positioner with 12" 3 jaw chuck, speeds to 1185 RPM, s/n: 25-3321-5

ROLLING STOCK

  • CLARK C500-45 LPG forklift with 4500 LB. capacity, 3 stage mast, 189" vertical lift, solid tires, s/n: 355-520-2810
  • HYSTER 40 LPG forklift with 4000 LB. capacity, 2 stage mast, 129” vertical lift, solid tires, s/n: n/a
  • JLG 40HT LGP aerial telescopic boom lift with 500 LB. capacity, 40' maximum platform height, 2 section boom, 1142 HRS recorded on meter at time of listing, s/n: n/a
  • JOHN DEERE JD410-D backhoe/loader with 87" loader bucket, 23” backhoe bucket, s/n: 22518IT
  • CUB CADET LTX1040 automatic lawn tractor with 42" blade deck, KOHLER COURAGE 19 twin cam OHV 597cc engine, 221 HRS recorded on meter at time of listing, s/n: n/a
  • FORD (1994) L8000 flatbed boom truck with NATIONAL 8 ton boom, 8.3L CUMMINS diesel engine, manual transmission, 352,102 KM recorded at time of listing, 18' x 8' steel deck, VIN: 1FDYR82E9RVA43716
  • FORD (2006) F-150 XL pickup truck with 4.2L engine 6 cylinder engine, automatic transmission, power steering, rear wheel drive, A/C, extended cab, cruise control, 228,192 KM recorded at time of listing, VIN: 1FTRF12266NA17729
  • CHEVROLET (2000) 3500 SERIES pickup truck with VORTEC 5.7L 8 cylinder engine, automatic transmission, power steering, rear wheel drive, A/C, crew cab, 94,564 MI recorded at time of listing, VIN: 1GCGC33R8YF512244
  • CHEVROLET 2500 SERIES pickup truck with VORTEC 5.7L 8 cylinder engine, automatic transmission, power steering, rear wheel drive, work rack, 210,047 KM recorded at time of listing, VIN: 1GCGC24R7VE266197
  • SULLAIR 185DPQ-JDD tow-behind diesel air compressor with JOHN DEERE engine, 185 CFM, 100 PSI, 1400 RPM idle speed, 2300 RPM rated speed, 6,004 HRS recorded at time of listing, s/n: 004-103414AIJ

ALSO:

LARGE QUANTITIES of ferrous and non-ferrous materials including STAINLESS STEEL, ALUMINUM, BRASS & COPPER flat stock, bar stock, angle steel, sheet steel; welding supplies; clamps; electrode stabilizing ovens; machine tooling; power tools; dumping hoppers; racking; JUSTRITE flammable storage cabinets; storage trailers; sea containers; inspection equipment; hardware; bearings; office furniture and MUCH MORE!

ONSITE & ONLINE


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all onsite bidders and 18% for all Webcast (Remote) bidders will apply at this sale.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com