Surplus Assets of

Green-Key Manufacturing Ltd.

Assets of a Metal Chair Manufacturer

 

Date

Tuesday, April 4, 2017

Start Time

1:00 PM EDT

Inspection

Tuesday, April 4 from 9:00 A.M. to start of auction.

Removal

Small items: Wednesday, April 5 by 5:00 P.M.
Remaining items: Tuesday, April 18 by 5:00 P.M.

Industry

Fabricating
 


 

FEATURING: (10+) CURVATUBI & PINES vertical & horizontal tube benders; (25+) ROUSELLE, BROWN & BOGGS, WARCO & BLOW gap frame presses; (20+) LINDE & ESAB welders; Assortment of rocker arm spot welders, vertical & horizontal saws, cut off saws, welding equipment & accessories, bending dies, general factory support equipment & MORE!

GREEN KEY VERTICAL HYDRAULIC BENDERS

  • PINES 5-T vertical hydraulic bender with 1.250" x 16ga capacity, 100° max angle, 20hp motor, s/n 44362-80162.
  • (3) PINES 3-T vertical hydraulic bender with 1.250" x 16ga capacity, 140° max angle, 20hp motor, s/n 44361-85195, 44361-78432, 44361-73376.
  • PINES vertical hydraulic bender s/n 010388

HORIZONTAL HYDRAULIC BENDERS

  • CURVATUBI B/40 horizontal hydraulic bender with 1.5" x .098" capacity, 25-180 radius degree, 12 programmable angles, s/n 771413
  • CURVATUBI B/4X horizontal hydraulic bender with 1.5" x .098" capacity, 25-180 radius degree, 12 programmable angles, s/n 661.304.007
  • CURVATUBI B/4 horizontal hydraulic bender with 1.5" x .098" capacity, 25-180 radius degree, 10 programmable angles, s/n 72080
  • DI-ACRO #6 horizontal hydraulic bender with 1.250" x 16ga capacity, 9" radius capacity, 290 max degree of bend, s/n DE-1238
  • (2) CURVATUBI horizontal hydraulic benders. (1) with 12 programmable angles, (1) with 10 programmable angles. s/n n/a
  • CURVATUBI horizontal hydraulic bender s/n 72121
  • PEDRAZZOLI horizontal hydraulic bender

PRESSES

  • CHICAGO 4L6 mechanical press brake with 55 ton x 6' capacity, 3" ram adjustment, front operated manual backgauge, palm button control, s/n L872
  • BROWN BOGGS 17LS OBI punch press with 60 ton capacity, 5" stroke, 3" ram adjustment, approx 85 spm
  • BLISS OBI punch press with 60 ton capacity, 5" stroke, 3" ram adjustment, 22.5" x 30" bolster plate, palm button control
  • (5) BROWN BOGGS 15LW OBI punch press with 40 ton capacity, 2.5" stroke, 2.5" ram adjustment, 105 spm, 18.5" x 28.5" bolster plate, s/n 13459, 6532, 5105, 1153, n/a
  • WARCO OBI punch press with 35 ton capacity, 3" stroke, 2.5" ram adjustment, 90 spm, 14" x 20" bolster plate, s/n 4899
  • BROWN BOGGS 44L punch press with 35 ton capacity
  • BROWN BOGGS 14LW OBI punch press with 30 ton capacity, 2.5" stroke, 2.5" ram adjustment, 105 spm, 13.750" x 22" bolster plate
  • (2) BROWN BOGGS 14L OBI punch press with 30 ton capacity, 2.5" stroke, 2.5" ram adjustment, 13.750" x 22" bolster plate
  • (2) ROUSSELLE #3 OBI punch press with 25 ton capacity, 2" stroke, 2" ram adjustment, 135 spm, s/n 12729, 12373
  • BLOW #5 OBI punch press
  • BAWDEN #4 OBI punch press
  • BLOW #3 OBI punch press
  • BAWDEN #2 OBI punch press with 20 ton capacity, 3" stroke, 2" ram adjustment, 10" x 20" bolster plate
  • BLOW 2H OBI punch press s/n 2235
  • R&K #1 press
  • ALCECO 4-IP bench type punch press

WELDING

  • LINCOLN PRECISION TIG 275 Digital TIG welder with cables & gun, s/n n/a
  • ESAB PHASE-ARC II 450 MIG welder with ESAB MIG 4HD wire feed s/n n/a
  • L-TEC VI-450SS MIG welder with L-TEC MIG-35 wire feed, cables & gun, s/n D85L53335
  • L-TEC VI-300 MIG welder with L-TEC MIG-35 wire feed, cables & gun, s/n n/a
  • L-TEC VI-300 MIG welder with ESAB MIG-35 wire feed, cables & gun, s/n C89A05228
  • L-TEC VI-300 MIG welder with ESAB MIG-35 wire feed, cables & gun, s/n n/a
  • L-TEC VI-300 MIG welder with LINDE MIG -35 wire feed, cables & gun, s/n C94B-53406
  • ESAB VI-300 MIG welder with L-TEC MIG-35 wire feed, cables & gun, s/n MD-1607017
  • ESAB VI-300 MIG welder with ESAB MIG-35 wire feed, cables & gun, s/n MD-1607016
  • ESAB VI-300 MIG welder with ESAB MIG-35 wire feed, cables & gun, s/n MD-1531066
  • LINDE VI-253 MIG welder with ESAB MIG-35 wire feed, cables & gun, s/n B84C-43699
  • LINDE VI-253 MIG welder with LINDE MIG-35 wire feed, cables & gun, s/n B82C-28211
  • LINDE VI-253 MIG welder with ESAB MIG-35 wire feed, cables & gun, s/n B79C-16318
  • LINDE VI-253 MIG welder with LINDE MIG-35 wire feed, cables & gun, s/n B79C-16184
  • LINDE VI-253 MIG welder with LINDE MIG-35 wire feed, cables & gun, s/n B62C28206
  • L-TEC VI-253 MIG welder with L-TEC MIG-35 wire feed, cables & gun, s/n n/a
  • L-TEC VI-253 MIG welder with L-TEC MIG-35 wire feed, cables & gun, s/n n/a
  • LINDE VI-252 MIG welder with LINDE MIG-35 wire feed, cables & gun, s/n B80C-19614
  • PROGRESSIVE PRA-75-30 50 kva spot welder with 30" throat s/n 3816
  • HOLDEN & HUNT Hunt #4 50kva spot welder with 18" throat s/n 8809

SAWS

  • RUHL SAWMASTER cold-cut saw with 12" dia saw blade,
  • PEDRAZZOLI 275DV cold-cut saw with 10" dia saw blade, coolant.
  • MFG UNKNOWN cold-cut saw with 10" dia saw blade, pneumatic clamping & downfeed
  • VERTICUT roll-in type vertical bandsaw with 10" throat, 9" max work height, s/n 694.
  • ROCKWELL/DELTA vertical bandsaw with 13.5" throat, 6.5" max work height, s/n 116499

LATHE & MILL

  • STANDARD-MODERN 13-34 toolroom lathe with 13" swing, 34" centers, 36-1800 rpm, 1.375" spindle bore, inch threading, 10" 4 jaw chuck, 6" 3 jaw chuck, s/n 7629
  • BRIDGEPORT J-SERIES ram type vertical mill with 9" x 42" power feed table, 80-2720 rpm, s/n 24187

DRILLS & SANDER

  • WESCO LCN-14F floor type drill press
  • KING bench type drill press
  • Bench type 3" wide belt sander

ROLLING STOCK

  • MITSUBISHI FGC-25 5,000lb LPG forklift with 189" lift, 3 stage mast, solid tires, s/n AF82A-51181

ALSO:

Adjustable pallet racking, parts bins, hand & power tools, office furniture, and much more

ONSITE & ONLINE


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 16% for all onsite bidders and 18% for all Webcast (Remote) bidders will apply at this sale.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com