Surplus Assets of

Garry Machine Manufacturing Inc. – Plant 2

Large Capacity CNC Turning & Machining Facility

 

Date

Tuesday, July 10, 2018

Start Time

10:30 AM EDT

Inspection

Monday, July 9 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction.

Removal

Small items: Wednesday, July 11 by 5:00 P.M.
Remaining items: Tuesday, July 24 by 5:00 P.M.

Industry

Machining
 


 

FEATURING: POREBA (2006) TRP 93 X 6M, 36”/48” x 240” large capacity gap bed engine lathe; LEADWELL (2007) LTC50 BXXL, large capacity CNC turning center; LEADWELL LTC50 CXL, large capacity CNC turning center; DAEWOO (1998) PUMA 400L, CNC turning center; HITACHI SEIKI (2001) HS 500, CNC twin pallet horizontal machining center; TOS W100A, 4” table type horizontal boring mill; TOS SUS 63H, 26” x 260” engine lathe; PBR TM30, 24” x 216” engine lathe; (5) POTISJE engine lathes up to 170” centers; EVERISING (2007) H-360HA, horizontal saw; CHEVALIER 10” x 20” hydraulic surface grinder; BANDAG (REBUILT IN 2006) autoclave SOLD!; (7) TOYOTA, DAEWOO & TCM forklifts up to 4900 LB capacity; MITUTOYO PH14LS, optical comparator w/ QUADRA-CHECK 200 control; DEVAIR (2006) 15HP air compressor package & dryer; GMC 7500, truck w/ roll-up tarp system; (10+) Cantilever material racks; ASSORTMENT OF 40 & 50 taper tool holders, tool carts, jib cranes, raw material, metal stacking bins & MORE!

CNC TURNING CENTERS

  • LEADWELL (2007) LTC-50BXXL CNC turning center with FANUC SERIES Oi-TC CNC control, 15” 3 jaw chuck, 32” swing over bed, 31” max. turning diameter, 158” max. turning length, 4.5” spindle bore, 12 station turret, speeds to 1500 RPM, 50 HP spindle motor, coolant, chip conveyor, (2) SMW-AUTOBLOCK hydraulic steady rests, hydraulic tailstock, tool checker arm, s/n: L2TJF1247

  • LEADWELL LTC-50CXL CNC turning center with FANUC SERIES O-T CNC control, 18” 3 jaw chuck, 32” swing over bed, 31” max. turning diameter, 120” max. turning length, approx. 4” spindle bore, 12 station turret, speeds to 1500 RPM, 60 HP spindle motor, coolant, chip conveyor, SMW-AUTOBLOCK hydraulic steady rest, hydraulic tailstock, s/n: L29303014

  • DAEWOO PUMA 400L CNC turning center with FANUC SERIES 18-T CNC control, 15” 3 jaw chuck, 26” swing over bed, 21” max. turning diameter, 85” max. turning length, approx. 4” spindle bore, 10 station turret, speeds to 3000 RPM, 50 HP spindle motor, coolant, chip conveyor, SMW-AUTOBLOCK hydraulic steady rest, hydraulic tailstock, tool checker arm, s/n: P35L0158

  • HITACHI-SEIKI HT-25S CNC turning center with FANUC 10TE-F CNC control, 10” 3 jaw chuck, 20” swing over bed, 10” max. turning diameter, 23” max. turning length, 2.5” spindle bore, 10 station turret, speeds to 3600 RPM, 15 HP spindle motor, chip conveyor, hydraulic tailstock, tool checker arm, s/n: 25197SC

RUBBER WORKING MACHINES

  • REMCO (2006) TSB 250TX270 THERMOSET strip builder with 50” max. diameter capacity, 270” max. length capacity, spindle speeds to 90 RPM, 3” cold feed extruder, integrated pneumatic tape wrap attachment, motorized tailstock, hot knife heater, s/n: 1796-460-90-F06 SOLD!
  • REMCO (2006) GGSY 232X270 computerized grinder-groover with touch screen PLC control, 32” max. diameter capacity, 270” max. length capacity, spindle speeds to 7200 RPM, 12” wheel dresser, automatic lube, diagnostic software, s/n: 1797-460-F06 SOLD!

FABRICATION EQUIPMENT

  • TOS W100A table type horizontal boring mill with 4” spindle, 49”x49” power rotary table, 44” vertical travel, 62” cross travel, #50 taper, speeds to 1120 RPM, facing head, MITUTOYO 3 axis DRO, vertical milling head, spindle support, s/n: 20-42
  • CHEVALIER FSG-3A1020 hydraulic surface grinder with 26”x10” magnetic chuck, coolant, incremental downfeed, s/n: N3795002
  • CHUNG-WEI G8635 hydraulic surface grinder with 24”x12” magnetic chuck, coolant, s/n: 86627
  • BANDAG (2006 REBUILT BY PATTERSON) autoclave with PATTERSON PLC touchscreen control, 100 PSIG max. work pressure, 300 deg. F. max. temperature, 7.5 HP motor, 25’x58” dia. enclosure, s/n: 06CA1771SOLD!
  • W.A. WHITNEY 815-171 hydraulic punch press with 100 ton capacity, 24” throat, 45”x42” table, 30 HP hydraulic power pack, s/n: 815-171-25417
  • CINCINNATI BICKFORD H-10 4’ radial arm drill with 48” column, speeds to 2000 RPM, 24”x18”x20” box table, s/n: 2110
  • DOALL (2006) 2013-V vertical band saw with 20” throat, 26”x26” table, 18” max. work height, s/n: 571-06402

LATHES

  • POREBA TRP 93/6M gap bed engine lathe with 32” swing, 248” between centers, 4” spindle bore, speeds to 800 RPM, inch/metric threading, chuck, s/n: 7402-06-1104-05
  • TOS SUS 63 H engine lathe with 26” swing, 260” between centers, 3” spindle bore, speeds to 1120 RPM, inch/metric threading, chuck, hydraulic steadies, steadies, s/n: 04-55-159
  • POSTISJE 24x170 gap bed engine lathe with 24” swing, 170” between centers, 3.5” spindle bore, speeds to 2000 RPM, inch/metric threading, chuck, s/n: 2685826
  • (2) POSTISJE 24x125 gap bed engine lathe with 24” swing, 125” between centers, 3.5” spindle bore, speeds to 1100 RPM, inch/metric threading, chucks, steadies, s/n: 045658748, 045658743
  • MEEHANITE SU582 gap bed engine lathe with 24” swing, 122” between centers, 3” spindle bore, speeds to 2000 RPM, inch/metric threading, chuck, steadies, coolant, s/n: n/a

WELDERS

  • LINCOLN ELECTRIC PRECISION TIG 375 digital aluminum TIG welder, s/n: U1060307911
  • HOBART STELLAR AT DC-CC/CV digital aluminum DC inverter arc welder with HOBART OLYMPIC XR-A extended reach wire feeder, cables & gun, s/n: KK147971
  • NELSON TRW SERIES 5000 MODEL 101 digital stud welder with cables & gun, s/n: SMA-9809

MATERIAL HANDLING

  • (2) DAEWOO GC30E LPG forklifts with 4800 lb. capacity, 186” vertical lift, side shift, indoor tires, s/n: GC30E-3FQ-00377, GC30E-3FQ-00376
  • CLARK CGC25 LPG forklift with 2500 lb. capacity, 240” vertical lift, side shift, indoor tires, s/n: C365L-1068-9404
  • CLARK C500-90LP LPG forklift with 8300 lb. capacity, 114” vertical lift, side shift, indoor tires, s/n: 685-36-1596
  • (4) MFG. UNKNOWN wall mounted jib arms with ½ ton capacity, CM ½ ton capacity electric hoist

FACTORY SUPPORT EQUIPMENT

  • DEVAIR SC30 rotary screw air compressor with 30 HP, s/n: 63055
  • DEVAIR (2006) PRO DRY ASD 150AL refrigerated air dryer, s/n: 06M-005037
  • DEVAIR (2006) air receiver tank with 120 gal. capacity
  • GUYSON shot blast system consisting of GUYSON MODEL 10 blast cleaning cabinet with 60”x60”x60” cabinet, variable speed rotary table; GUYSON 150/16 cyclonic dust collector; GUYSON D-1000 cartridge type dust collector; s/n: M46206, C46206, D46206
  • PLYMOVENT (2012) MFC-1200 portable snorkel-type fume extractor, s/n: 9156377
  • (2) PLYMOVENT EMK-1402 portable snorkel-type fume extractors

ALSO:

MITUTOYO PH14LS optical comparator, (2) SMOG HOGG mist collectors; (10+) cantilever racks; WIDE SELECTION of TOOLING including end mills, drills, boring bars, reamers; #40 & #50 tool holders; power tools; hand tools; (50+) wire mesh bins; inspection equipment; machine tooling and MUCH MORE!

ONSITE & ONLINE


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 16% for all onsite bidders and 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com