Surplus Assets of

Garrison Tool and Die

Stamping Presses & Support Equipment!

 

Date

Wednesday, September 7, 2016

Start Time

10:30 AM EDT

Inspection

Tuesday, September 6 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction.

Removal

Small items: Thursday, September 8 by 5:00 P.M.
Remaining items: Wednesday, September 22 by 5:00 P.M.

Industry

Stamping
 


 

FEATURING: WAGNER (OVER 200K SPENT IN UPGRADES) 500 ton gap frame press with 40” x 60” bed; SMERAL 400 ton gap frame press; SMERAL 250 ton gap frame press; SMERAL 160 ton gap frame press; SMERAL 100 ton OBI press; MECON servo press feed line with digital controls; COLT (LATE MODEL) coil cradle/straightener 12” x ¼” capacity; LITTELL mandrel uncoiler & straightener; GEMCO press feeder; (5+) HYDRAULIC 2 & 4 post presses up to 300 ton; WATERBURRY FARREL #20 thread roller; (2) BALTEC (2003) orbital riveters with digital control; HARDINGE CONQUEST GT CNC gang lathe with bar feeder; HARDINGE precision tool room lathe; (2) HYSTER & CLARK forklifts; CLAUSING hydraulic surface grinder; LARGE ASSORTMENT OF (10+) BRACKER & BALTEC orbital riveters, bowl feeders, hopper loaders, hydraulic presses, chip conveyors, horizontal milling machines, oil temperature control units, press feeders, press straighteners, coil cradles, wire straightener, hydraulic power packs & MORE!

CNC GANG TOOL LATHE

  • HARDINGE CONQUEST CS-GT CNC gang tool lathe with GE FANUC 18T CNC control, speeds to 6000 RPM, 5 HP spindle motor, 3 tooling stations, 33757 hours recorded on meter, coolant, chip conveyor, LNS HYDROBAR MINI-SPRINT CNC bar feed with LNS CNC control, 150” cap. (may be sold separately), s/n: GT-631

HYDRAULIC PRESSES

  • ELMES 300 ton 4 post hydraulic die press with 16” diameter ram, approx.14” stroke, 24”x24” bed, 25”x21” top plate, s/n: 541-1060
  • CHING CHOW HL-300 300 ton 4 post hydraulic die press with approx. 13” stroke, 34”x28” bed, 21”x15” between posts, s/n: 8928
  • WATSON-STILLMAN 250 ton 4 post hydraulic die press with 18” diameter ram, approx. 8” stroke, 34”x34” bed, 28”x28” between posts, s/n: n/a
  • HYDRAULIC POWER CORP. 54-25 75 ton 4 post hydraulic die press with 16” stroke, 30” daylight, 14” shut height, 30”x24” bed, s/n: 41673
  • MFG. UNKNOWN 200 ton h-frame hydraulic die press with 12” diameter ram, approx. 12” stroke, 20”x13” bed, s/n: n/a
  • DENISON MULTIPRESS 6 ton hydraulic press with 10” stroke, 2” diameter ram, 2.75” cylinder bore, 6” throat, 6 station 21” diameter turn table, s/n: 17359-A59S210
  • DENISON MULTIPRESS 6 ton hydraulic press with 3 ¼” diameter ram, 6 station 21” diameter turn table, s/n: 27098
  • DENISON 6 ton hydraulic press with 3 ¼” diameter ram, 16”x11” table, s/n: 6996-SO1
  • DENISON MULTIPRESS 4 ton hydraulic press with 6 station 21” diameter turn table, s/n: 9500-V7

STRAIGHT SIDE PRESS

  • WAGNER 500 ton straight side press with 24 1/2" max. shut height, 67"x35" bed, 54"x31" top plate, palm control, GEMCO AUTOMATION control unit (complete rebuild 2006, new clutch, soft start, CSA Z142-02 compliant) S/N: N/A

GAP FRAME PRESSES

  • SMERAL LE-400C 400 ton gap frame press, with 5 ½” max. stroke, 14” shut height, 40 max. strokes per minute, 49”x34” bed, 37”x22” top plate, COLT CERF-40-12 electronic roll feeder with 12” max. width, s/n: 231492
  • SMERAL LE-250A 250 ton gap frame press with 5 ½” max. stroke, 14”shut height, 45 max. strokes per minute, 44”x31” bed, 30”x18” top plate, GEMCO AUTOMATION control unit s/n: 2300113
  • SMERAL LE-160/C 160 ton gap frame press with 4 ½” max. stroke, 17” shut height, 50 max. strokes per minute, 39”x27” bed, 29”x15” top plate, ARC-TROL-1 dro, pneumatic feeder, s/n: 229478

OBI PRESS

  • TOMA LEXN100C 100 ton OBI press with 4 ½” stroke, 14 ½” shut height, 150 strokes per minute, 39”x25” bed, 22”x14” top plate, ARC-TROL-1 dro, pneumatic feeder, s/n: 1884

COIL CRADLES

  • COLT CSMC-60-12 coil cradle with 12” max. width pneumatic feeder, 5 HP motor, pendant control, s/n: 1281092
  • LITTELL 408-C20 coil cradle with 0.125”x8” cap., mechanical feeder, s/n: 41605-51-2
  • LITTELL 416-C20 coil cradle with 0.125”x12” cap., mechanical feeder, s/n: 36909-49
  • EGAN X30-615-500 coil cradle with 15” max. width mechanical feeder, s/n: 1926
  • MFG. UNKNOWN coil cradle with 10” max. width mechanical feeder, s/n: n/a

UNCOILER

  • AMERICAN STEEL LINE CO. MODEL 60 uncoiler with 1000 lb. cap., s/n: 4244

THREAD ROLLER

  • WATERBURY FARREL NO. 20 thread roller with 3/8” max. thread diameter, 3” max. thread length, 4” max. shank length, vibratory bowl feeder, HYTROL MODEL TR incline belt conveyor with hopper/feeder (may be sold separately), s/n: n/a

RIVETERS

  • BALTEC dual head riveter with (2) BALTEC RNE281 riveters with speeds to 1660 RPM, (2) BALTEC digital control units, s/n: n/a
  • VSI SPINNOMATIC TM-10 pneumatic riveter with speeds to 1200 RPM, palm controls, s/n: 11455
  • BLACK & WEBSTER BW-100 orbital riveter with speeds to 1700 RPM, s/n: 122
  • BRACKER RN301 portable riveter with speeds to 1450 RPM, s/n: 30522
  • BRACKER RN280 pneumatic riveter with speeds to 1680 RPM
  • BALTEC RN180 pneumatic riveter with speeds to 1620 RPM
  • BALTEC RNE080 pneumatic riveter with speeds to 1700 RPM

SURFACE GRINDERS

  • TOS BRH-40U hydraulic surface grinder with NAREX 59”x16” magnetic chuck, coolant, s/n: 600111
  • TOS BRH-40B hydraulic surface grinder with NAREX 59”x16” magnetic chuck, coolant, s/n: 600-609
  • CLAUSING COVEL 4020 hydraulic surface grinder with 15”x10” magnetic chuck, coolant, s/n: 17H5919

MISCELLANEOUS MACHINERY

  • SUNNEN MBB-1660 horizontal hone with 16” max. stroke, 0.06” – 6.5” mandrel diameter, s/n: 82837
  • HARDINGE HCT-CF turret lathe with 13” between centers, speeds to 3000 RPM, 1” spindle bore, 8 station turret, s/n: n/a
  • VARANAMO FU-3 universal mill with speeds to 1500 RPM, 60"x13" T-slot table, pneumatic clamp fixture s/n: 1702
  • CINCINNATI horizontal mill with speeds to 1500 RPM, 35"x10" T-slot table, pneumatic clamp fixture s/n: n/a
  • CANADIAN BUFFALO NO. 15 floor type drill press with speeds to 4200 RPM
  • (2) AIRLOX 7” pneumatic machine vises
  • VTR 15” diameter vibratory bowl feeder

ALSO:

Hydraulic power packs, butcher block work benches, bench vises, hydraulic die carts, wire feeders, steel bins, factory support equipment and MUCH MORE!

ONSITE & ONLINE


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 16% for all onsite bidders and 18% for all Webcast (Remote) bidders will apply at this sale.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com