For Immediate Sale – Pharmaceutical Equipment

Freeze Dryer, Stainless Steel Tanks & More!

 

Date

Ongoing

Start Time

Ongoing

Inspection

Please contact Razvan Dinu at 416.277.4160 for further details.

Removal

Please call 416.962.9600 for details.
 

Location

Los Angeles, California, USA


 

FOR IMMEDIATE SALE:

  • LYO LINE 6 – HULL MODEL 120 FXS200 LYOPHILIZER WITH 11 SHELVES (10 USABLE); 3’ W X 4’ D, 120 SQ/FT TOTAL AVAILABLE SHELF AREA, 200 LITER CAPACITY EXTERNAL CONDENSER, FULL STAINLESS STEEL CONSTRUCTION WITH STEAM STERILIZATION, (3) EDWARDS 80 CFM SKID MOUNTED VACUUM PUMPS WITH MIST FILTERS, SKID MOUNTED REFRIGERATION UNIT WITH (4) CARLYLE C3 COMPRESSORS, R-507 REFRIGERANT, S/N DRYER # 6 (DELAY DELIVERY - FALL 2018)
  • MUELLER T#54 STAINLESS STEEL JACKETED MIXING TANK WITH 4500 LITER CAPACITY, 25 PSI @ 300 DEG F VESSEL MAWP, 140 PSIG @ 300 DEG F JACKET MAWP, LIGHTNIN TOP OFFSET MOUNTED ELECTRIC SINGLE ACTION AGITATOR, 20" DIAMETER TOP ACCESS HINGED LID WITH GAS STRUT LIFT ASSIST, (3) 1" BOTTOM DISCHARGE PORTS, 8" DIAMETER FILL PORT TOP CENTRAL MOUNTED, (5) 1.5" TOP MOUNTED INSTRUMENT PORTS, FLUID LEVEL SENSOR, (4) SLIDE OUT REMOVABLE LEGS, 92" DIAMETER X 80" HEIGHT APPROX. TANK DIMENSIONS, S/N P2942-1 (416.1043)
  • WAUKESHA (2012) SPX 015 U1 CART MOUNTED STAINLESS STEEL PUMP WITH 2 HP STAINLESS STEEL DRIVE MOTOR, STAINLESS STEEL PLANETARY GEAR REDUCER, 230/460V-3PH-60HZ, S/N 1000002820864 (416.3014)
  • PRECISION STAINLESS SINGLE WALL PORTABLE TANK WITH 50 LITER CAPACITY, 18" DIAMETER X 22" HEIGHT APPROX. TANK DIMENSIONS, HINGED LID, (3) THROUGH LID TOP PORTS, SINGLE BOTTON DISCHARGE PORT, (4) 4" COMPOSITE SWIVEL CASTERS, S/N 1825 (420.1125)
  • DCI T#13 STAINLESS STEEL MIXING TANK WITH 200 LITER CAPACITY, 50 PSIG @ 300 DEG F VESSEL MAWP, LIGHTNIN TOP OFFSET MOUNTED SINGLE ACTION AGITATOR, 24" DIAMETER TOP HINGED LID, (5) TOP PORTS, SINGLE BOTTOM PORT, 24" DIAMETER X 28" HEIGHT APPROX. TANK DIMENSIONS, SQUARE SKID MOUNTED WITH LOAD CELLS, S/N 87PH35787E (420.1013)
  • DCI T#14 STAINLESS STEEL MIXING TANK WITH, 50 PSIG @ 300 DEG F VESSEL MAWP, LIGHTNIN TOP OFFSET MOUNTED SINGLE ACTION AGITATOR, 22" DIAMETER TOP HINGED LID, (4) TOP PORTS, SINGLE BOTTOM PORT, 22" DIAMETER X 21" HEIGHT APPROX. TANK DIMENSIONS, SQUARE SKID MOUNTED WITH LOAD CELLS, S/N 87PH35789C (420.1014)
  • DCI T#15 STAINLESS STEEL MIXING TANK WITH 50 PSIG @ 300 DEG F VESSEL MAWP, LIGHTNIN TOP OFFSET MOUNTED SINGLE ACTION AGITATOR, 23" DIAMETER TOP HINGED LID, (5) TOP PORTS, SINGLE BOTTOM PORT, 23" DIAMETER X 28" HEIGHT APPROX. TANK DIMENSIONS, SQUARE SKID MOUNTED WITH LOAD CELLS, S/N 87PH35877D (420.1015)
  • (2) DCI T#19 & 18A STAINLESS STEEL MIXING TANKS WITH 50 PSIG @ 300 DEG F VESSEL MAWP, LIGHTNIN TOP OFFSET MOUNTED SINGLE ACTION AGITATORS, 21" DIAMETER TOP HINGED LID, (3) TOP PORTS, SINGLE BOTTOM PORT, 21" DIAMETER X 22" HEIGHT APPROX. TANK DIMENSIONS, SQUARE SKID MOUNTED WITH LOAD CELLS, S/N N/A (420.1018 & 420.1019)
  • DCI T#20 STAINLESS STEEL MIXING TANK WITH 200 LITER CAPACITY, 50 PSIG @ 300 DEG F VESSEL MAWP, LIGHTNIN TOP OFFSET MOUNTED SINGLE ACTION AGITATOR, 24" DIAMETER TOP HINGED LID, (5) TOP PORTS, SINGLE BOTTOM PORT, 24" DIAMETER X 28" HEIGHT APPROX. TANK DIMENSIONS, SQUARE SKID MOUNTED WITH LOAD CELLS, S/N N/A (420.1020)
  • DCI T#17 & 16 STAINLESS STEEL TANKS WITH 50 PSIG @ 300 DEG F VESSEL MAWP, 13" DIAMETER TOP HINGED LID, (3) TOP PORTS, SINGLE BOTTOM PORT, 13" DIAMETER X 25" HEIGHT APPROX. TANK DIMENSIONS, SQUARE SKID MOUNTED WITH LOAD CELLS, S/N N/A (420.1017)
  • DCI (2009) AHF-M NANO PORTABLE JACKETED STAINLESS STEEL REACTOR VESSEL WITH 50 LITER CAPACITY, 45 PSI @ 346 DEG F VESSEL MAWP, 150 PSI @ 346 DEG F JACKET MAWP, 2.8 LITER JACKET VOLUME, 25" HINGED LID WITH GAS ASSIST STRUT, (9) TOP FILL & INSTRUMENT PORTS FROM 1" TO 8" DIAMETER, 2" & 1" DIAMETER BOTTOM DISCHARGE PORTS, (2) SIDE MOUNTED GLASS VIEW AND PROBE PORTS, STERIDOSE STAINLESS STEEL 1/4 HP SINGLE ACTION  BOTTOM OFFSET MOUNT AGITATOR, (4) 6" COMPOSITE SWIVEL CASTERS, MAGNETROL DIGITAL TP PROBE, 230/460V-3PH-60HZ,  S/N JS4530 (420.1150)
  • DCI (2009) AHF-M NANO PORTABLE JACKETED STAINLESS STEEL REACTOR VESSEL WITH 50 LITER CAPACITY, 45 PSI @ 346 DEG F VESSEL MAWP, 150 PSI @ 346 DEG F JACKET MAWP, 2.8 LITER JACKET VOLUME, 25" HINGED LID WITH GAS ASSIST STRUT, (9) TOP FILL & INSTRUMENT PORTS FROM 1" TO 8" DIAMETER, 2" & 1" DIAMETER BOTTOM DISCHARGE PORTS, (2) SIDE MOUNTED GLASS VIEW AND PROBE PORTS, STERIDOSE STAINLESS STEEL 1/4 HP SINGLE ACTION  BOTTOM OFFSET MOUNT AGITATOR, (4) 6" COMPOSITE SWIVEL CASTERS, MAGNETROL DIGITAL TP PROBE, 230/460V-3PH-60HZ,  S/N JS4529 (420.1145)
  • SOMMER & STRASSBURGER (2013) RAUM/CHAMBER STAINLESS STEEL CART MOUNTED PORTABLE REACTOR VESSEL WITH 125 LITER CAPACITY, 75 PSIG @ 285 DEG F(6) TOP PORTS WITH GLASS VIEWING PORT, (12) BOTTOM PORTS, 25" DIAMETER X 15" HEIGHT APPROX. TANK DIMESNIONS, GLASS BOWL, STAINLESS STEEL MANIFOLDS, (4) 2" COMPOSITE SWIVEL LOCKING CASTERS
  • 3M FILTRATION (2015) STAINLESS STEEL CART MOUNTED CUNO FILTRATION UNIT WITH 45 PSIG @ 150 DEG F MAWP, S/N S10868-10-2 (420.2269)
  • 3M FILTRATION (2015) STAINLESS STEEL CART MOUNTED CUNO FILTRATION UNIT WITH 45 PSIG @ 150 DEG F MAWP, S/N S10860-10-4 (420.2271

FOR IMMEDIATE SALE


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com