Can-Bec Metal Inc.

Custom Metal Fabricating Facility

 

Date

Thursday, January 29, 2015

Start Time

10:30 AM EST

Inspection

Wednesday, January 28 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction.

Removal

Small Items: Thursday, January 28 before 5:00 P.M.
Remaining Items: Wednesday, February 4 before 5:00 P.M.

Industry

Fabricating
 

 

http://www.bidspotter.com/en-us/auction-catalogues/century-services-toronto/catalogue-id-bscce10021

CUSTOM METAL FABRICATING FACILITY FEATURING:ALLSTEEL 10’ x 1.2” shear; BAYKAL (1994) APH 3600-150 press brake; HYD-MECH S-20II horizontal saw; CCCP 2M55 radial drill; SHOPMADE 125 ton hydraulic press; GEKA HYDRACROP 80 hydraulic ironworker; KAO MING KMR-700DS radial drill; TOOLEX TUG40 engine lathe; BURNY 5 head oxy-acetylene cutting table; GULLCO (1997) GM-01-200 linear mark robot; (30+) welders and assorted accessories; CHEVROLET (2012) SILVERADO 1500 pick-up truck; PONTIAC (2008) G5 sedan; (3) forklifts up to 8000 lb capacity; LARGE USEABLE RAW MATERIAL & SCRAP OPPORTUNITY AVAILABLE; LARGE OFFERING OF FACTORY SUPPORT EQUIPMENT CONSISTING OF: power and idle tank turning rolls, fume extractors, paint pumps, lifting accessories, parts washers, saws, milling machines, power and perishable tools, air compressors and dryers, adjustable racking, steel work tables, GREENLEE punch sets, jacks up to 150 ton capacity, office furniture & equipment and MUCH MORE!

METAL FABRICATING EQUIPMENT

  • 1986 Allsteel 1/2", 10' Shear 
  • 1994 Baykal "APH 3600-150" Press Brake - S/N: 1928
  • Hydmech " S-20 Series II" Horizontal Band Saw - S/N: 61204822H
  • Hydmech " S-20A" 2HP 575V Band Saw - S/N: 10188220 w/ 13"x20" Capacity, Automatic Feed, 1" Blade
  • 1990 CCCP "2M55" Radial Drill - S/N: 19843 w/ 710 mm. x 710 mm. Box Table
  • Shopmade 125-Ton Hydraulic Press w/ Power Supply
  • GEKA "Hydracrop 80" Ironworker - S/N: 8661
  • Teledyne Pines "M-82622" 5-Ton Vertical Tube Bender - S/N:  44361-78020 w/ 1.5"x0.065" Max. Capacity, 7/8"x0.035" Square Tube, 5/8" Round Bar, 1/2" Square Bar, 20HP 575V/3PH/60Hz, 3,000 lbs.
  • 1992 Kao Ming "KMR-700DS" Radial Arm Drill - S/N: 70230
  • 1987 Toolex "TUG40" Lathe - S/N: 6492
  • Worktable 13,500 lbs. Floor Plate
  • Set of "WRD-8-88" Motorized Turning Rolls - S/N: 7087
  • Set of Turning Rolls
  • Jib Booms w/ Hoists
  • Burny 5-Multi-Head Oxy-Acetylene Cutting Table - S/N: 93-02-135  w/ (5) "MN5-896502" Cutting Torches, 12'x22' Shopmade Water Table
  • Whitney Knacher Hydraulic Power Supply
  • Bernard "6300" Smoke Hog - S/N: 52684
  • L-Tec "PCM100" Plasma Cutter - S/N: A89B-04226
  • 36" Electric Rolls
  • Lifting Chains:  (6) '6,000 lbs., (1) Chain 3' to 7,000 lbs., 1-Channel 6,000 lbs. 12, 2-Channels 7' to 15,000 lbs., 1-Channel 6' to 20,800 lbs., 2-Channels 12' 31,300 lbs., 1-Channel 9" to 31,300 lbs., 1-Channel 4-Strand 7' to 18,400 lbs. and 1-Channel 13 Simple
  • Airless Paint Pumps
  • King 14" Abrasive Cut-Off  Saw
  • 1997 Gullco "GM-01-200" Linear Mark Robot - S/N: 8767
  • Cement Mixer
  • Metal Stapping Cart w/ Tools
  • Uni-Ram "870" Parts Cleaner
  • Mastercraft 10" Deluxe Table Saw
  • Dryrod "P7" 100°F to 550°F Rod Oven
  • 1997 Gardner Denver Rotary Screw Air Compressor
  • Quincy Rotary Screw Air Compressor - S/N: U87610
  • Refrigerated Air Dryer

WELDERS

  • (14) Hobart "1561", "1547", "1561", "1587", "1587" and "1557" Arc Welders - S/N: 60FC7366, 77WA06978, 60FC7361, 60FC8332, 60FC7948, 60FC8327, (8) N/A
  • (3) Lincoln Electric "255" Mig Welders - S/N: U1051106166, U1060603126 & U1050701876
  • Lincoln Electric "PowerMig 255" Mig Welder - S/N: U1030503750
  • (3) Lincoln Electric "Power Mig 255C" Mig Welders - S/N: U197-0515728, U1070304672 & U 1060309714
  • Lincoln Electric "Invertec V450 Pro Series" Mig Welder - S/N: U1081201396
  • (2) Lincoln Electric "WireMatic 255" Mig Welders - S/N: U1981106846, U1030612599
  • (2) Lincoln Electric "Invertec V450" Mig Welder - S/N: U1081103271, U1090402952 w/ Wire Feeder
  • (3) Lincoln Electric "CV-400" Mig Welders - S/N: U1051210973, U1051211912 & U1070609545 w/ "LF-74" Wire Feeder - S/N: C1961200265, (2) N/A
  • (2) Lincoln Electric "Flextec 450" Mig Welders - S/N: U1111108758 & U1070604697 w/ "LF-74" Wire Feeders
  • Miller "MP-65E" Mig Welder - S/N: HF858115
  • Nelson "TR-850" 5/8" Stud Welder - S/N: HK328563 w/ Gun and Carriage
  • Millerpour "MO750" Welder - S/N: HF858813
  • Miller "FC6TC" DC Welder - S/N: R3969471
  • Welco "RC750" Welder - S/N: 9651 w/ "30RT Series" Wire Feed
  • (4) Welding Curtains

ROLLING STOCK

  • 2012 Chevrolet "Silverado 1500" Pick-Up Truck - VIN:  1GCNCPEX6CZ347229, KMS:  19,748
  • 2008 Pontiac "G5" Sedan - VIN:  1G2AJ55F387281715, KMS:  94,024
  • Toyota "3FG35" LPG Forklift Truck - S/N: 17785 w/ 8,000 lbs. Capacity, Pneumatic Tires, 3-Stage Mast, Side Shift
  • Clark "C500-120" Forklift Truck - S/N: 0151145010 w/ 7,000 lbs. Capacity, Side Shift, Tandem Front Tires
  • TCM "FCG25-2H" Forklift Truck - S/N: A40MG0238 w/ Side Shift, Solid Tire

ANCILLARY EQUIPMENT

  • (13) Sections Pallet Racking
  • (10) Sections Racking
  • Metal Shelf
  • Metal Cabinet
  • (15) Steel Trestles
  • (6) 2-Door Metal Storage Cabinets
  • 15-Ton, 75-Ton and 150-Ton Jacks
  • Threading
  • Work Tables:  Cast 32" x 112", 80" x 12', 4 ' x 6', Work Table w/ Vise, (2) 5' x 10' Steel, 8' x 30' Steel
  • Steel Benches
  • Ventilation Hood
  • Preheating Torch
  • Greenlee "7310" Knockout Punch
  • (2) Mastervac Shop Vacuums
  • Quackerstate Lubrication System
  • 15' x 8' Manual Cutting Table
  • (6) Assorted Clamps
  • (2) Koike Radiagraphs
  • (3) 42" x 78" Containers
  • (20) Roller Supports
  • (16) Easels
  • 90" Conveyor Section
  • (2) Vanguard 1.5-Ton Chain Hoists
  • Mastercraft 8' Drum
  • (3) Trolleys
  • (8) Heating Torches
  • (2) Tilting skips
  • 16-Step Sliding Scale
  • (2) Flat-Shaped Movable Aluminum
  • (2) Tank Rolls of 18
  • (2) Non-Motorized Rollers 18" Dual Wheel
  • (2) Motorized Rollers 24" Single Wheel
  • (2) 6' Aluminum Step Ladders
  • 8' Step Ladder
  • 13' Wooden Ladder
  • 12' Wooden Ladder
  • 24' Extendable ladder

STORES & METAL INVENTORY

  • Bar Stock, Angle Iron, Plate Steel, Sheet Stock, Checker Plate, Aluminum, Material Storage Racks

OFFICE FURNITURE & COMPUTER EQUIPMENT

  • Desks, Chairs, File Cabinets, Shelving, Room Dividers, Folding Tables, Computers, Printers, Microwave, Storage Cabinets

sale held proudly in conjunction with:

Century Services Inc.
www.centuryservices.com

ONSITE & ONLINE


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com