Arnprior Aerospace Inc.

Large Aerospace Fabricating Facility Closure

 

Date

Tuesday, October 29, 2024

Start Time

10:30 AM EDT

Inspection

Monday, October 28 from 9 AM to 4 PM EDT.

Removal

All assets must be removed no later than Friday, November 22 by appointment only. Rigging details to follow.

Industry

Fabricating
 

CNC PRESS BRAKES

  • AMADA FBD-5020E 50 ton 3-axis CNC hydraulic press brake with AMADA NC9-EXII CNC control, 82" overall bending length, 66.9" distance between housings, 3.94" stroke, 14.57" open height, CNC back gauge, 15.75" throat, safety cage with light curtains, s/n: 5200663
  • TOYOKOKI APB-3613WU 40 ton 4-axis CNC servo-electric press brake with CNC control, 50" overall bending length, 37" distance between housings, 3.93" stroke, safety cage with light curtains, s/n: 7003859

CNC BRIDGE-TYPE ROUTERS

  • ACCU-ROUTER SERIES 3C CNC bridge-type router with GE FANUC SERIES 18-M CNC control, 48"x96" table, travels: X - 96"; Y - 72"; Z - 7", speeds to 3000 RPM, 40 taper spindle, drill head, torch head, tool rack with (15) tool holders, coolant, vacuum system, vibratory screw feeder bowl, s/n: 9646S1R002
  • ACCU-ROUTER SERIES 3A high velocity CNC bridge-type router with GE FANUC SERIES 18-M CNC control, 48"x96" table, travels: X - 96"; Y - 72"; Z - 7", speeds to 3000 RPM, 40 taper spindle, tool rack, s/n: n/a

HYDRAULIC SHEAR

  • ACCURSHEAR 61356 hydraulic power shear with 6'x0.135" capacity, programmable back gauge, safety cage with light curtains, s/n: 3474

NATURAL GAS OVENS

  • DESPATCH PSC3-38S-G natural gas-fired walk-through high temperature oven with 500 deg. F max. operating temperature, 350,000 BTU heater capacity, HONEYWELL digital temperature contols, s/n: 158454
  • DESPATCH PWC3-21-1G natural gas-fired industrial walk-in high temperature oven with 500 deg. F max. operating temperature, 250,000 BTU/HR heater capacity, HONEYWELL digital temperature controls, s/n: 152258

ELECTRIC FURNACES & OVENS

  • (2) PARK THERMAL vertical load pit electric furnaces with 36” dia. x 54” insulated furnace chamber, 12,050 deg. F max. temperature, 600 deg. F – 1200 deg. F operating range, 836 gal. heat treat rinse tank & heat pump, 836 gal. heat treat quench tank & heat pump, HONEYWELL digital control, s/n: n/a, n/a
  • PARK THERMAL electric heat treat oven with 1400 deg. F max. temperature, 700 gal. capacity heat treat tank, HONEYWELL digital control, SBS CORPORATION heat exchanger, s/n: P4375
  • GRIEVE MODEL 323 large capacity electric bench oven with 350 deg. F max. temperature, HONEYWELL digital temperature controller, 1/3 HP, s/n: 311727
  • ONTEMP electric industrial oven with 300 deg. F max. temperature, HONEYWELL digital temperature control, s/n: 87 5W5H2D
  • GASMAC NB350 electric lab oven with 350 deg. F max. temperature, HONEYWELL digital temperature control, s/n: JK960810

MECHANICAL GAP FRAME PRESS

  • AIDA C1-15 150 ton mechanical gap frame press with 61.8"x29.9" bolster, 7.8" stroke, 3.9" slide adjustment, speeds to 45 SPM, 15 HP, air clutch, GORDON brake monitor, safety light curtains, s/n: 00215-2069

COMPRESSION RIVETERS

  • (2) US INDUSTRIAL TOOL 150 EA-COLD floor-type compression riveters with 36" throat, s/n: 12972, n/a
  • US INDUSTRIAL TOOL 150ER floor-type compression riveter with 36" throat, s/n: 091501
  • (6) CHICAGO PNEUMATIC CP-450EA floor-type compression riveters with 36" throat, s/n: H-649054, H-886927, H-597286, H-974332, H-959402, H-650014
  • ZEPHER DIMPLER 7F-450FA-36F floor-type compression riveter with 36" throat, s/n: 876931
  • (4) US INDUSTRIAL TOOL 150 EA-COLD floor-type compression riveters with 24" throat, s/n: 7902, 2882, 3890, 3961
  • CHICAGO PNEUMATIC CP-0450-CEJAF compression riveter with 12" throat, s/n: n/a
  • US INDUSTRIAL TOOL 150 compression riveter with 12" throat, s/n: 28910
  • (4) US INDUSTRIAL TOOL 114TC compression riveters with 9" throat, s/n: 20075, 20076, 19919, 59874

CONVENTIONAL MACHINERY

  • PARPAS G1 vertical bed mill with 69"x24" table, travels: X - 47.24"; Y - 23.62"; Z - 19.68", 26.57" max. distance spindle nose to table top, 50 taper spindle, speeds to 3200 RPM, 10 HP spindle motor, coolant, HEIDENHAIN 3-axis DRO, set up plate, s/n: 134902
  • LILIAN 3VH vertical milling machine with 10”x50” table, speeds to 4200 RPM, power drawbar, power table, MITUTOYO LINEAR SCALE 2-axis DRO, 6" machine vise, s/n: 9395
  • TECHLEADER 5VFL vertical milling machine with 10”X50” table, speeds to 3600 RPM, KURT POWER LOCK power drawbar, power table, 3-axis DRO, 6” machine vise, s/n: 7796
  • SAMPSON/AKYAPAK (2004) MRM 640-2050X110 80" bending rolls with SIEMENS digital microprocessor control, s/n: 4568
  • LOWN B400 38" power bending rolls, s/n: n/a
  • OKUMA LS engine lathe with 24" swing over bed, 60" distance between centers, 1.75" spindle bore, speeds to 2000 RPM, inch/metric threading, collet chuck, steady rest, coolant, MITUTOYO KA COUNTER 2-axis DRO, s/n: 4102-9211
  • SOUTH BEND LATHE MODEL 530 gap bed engine lathe with 22” swing over bed, 86” distance between centers, 2.5” spindle bore, speeds to 1600 RPM, inch/metric threading, collet chuck, steady rests, coolant, s/n: n/a
  • ARCHDALE 3' radial arm drill with speeds to 1800 RPM, 19"x32" adjustable table, s/n: 8039
  • RF (2008) JFC-46F gear head drilling & milling machine with 21"x18" table, speeds to 3000 RPM, machine vise, s/n: 734468
  • AMADA H-250-SA horizontal band saw with 10”x12” capacity, speeds to 260 FPM, s/n: n/a
  • DOALL 3613-1 vertical band saw with 26”x26" table, 36" throat, 13" max. workpiece height, s/n: 440-88312
  • DOALL 2013-V vertical band saw with 26”x26”” table, 20” throat, 13” max. workpiece height, DOALL DBW-15 blade cutter/welder, s/n: n/a
  • (2) GENERAL INTERNATIONAL 90-040 M1 vertical band saws with 21.5" x 15.75" table, s/n: 20141050, 201410105
  • (2) GENERAL MODEL 490 vertical band saws with 16"x15" table, 15" throat, s/n: AH-1892, G-1690
  • WEGOMA SD-17S 17" metal cutting mitre saw with speeds to 3400 RPM, ACU-RITE DRO, infeed & outfeed roller conveyors, s/n: 17S00288
  • OSTER PIPE MASTER 654AC portable pipe threader with auto-chuck, s/n: ACE-615
  • ENERPAC 50 ton capacity H-frame hydraulic shop press with hydraulic power pack, s/n: n/a
  • OTC 17.5 ton capacity H-frame hydraulic shop press, s/n: n/a
  • DOALL DTR-28 radial drill press with 24"x30" table, speeds to 3360 RPM, s/n: 82-8507
  • (12) DELTA 17-901 16.5" floor-type drill presses, s/n: R8915, W9636, n/a, R8813, n/a, W0020, n/a, n/a, R8733, 9737, n/a, n/a
  • KING CANADA KC-116FC 13" floor-type drill press, s/n: 138
  • GENERAL MODEL 340 15" bench-type drill press, s/n: G19979
  • DELTA SHOPMASTER DP300 12" bench-type drill press, s/n: W3051C
  • HAUSSMANN DP1200 12" bench-type drill press with stand, s/n: 2010.03
  • SUNNEN MBB-1800 precision honing machine, s/n: 17039

WELDERS

  • MILLER DYNASTY DX TIG welder with MILLER COOLMATE 3 chiller, cables & gun, s/n: KK076643
  • MILLER MILLERMATIC 200 MIG welder with cables & gun, s/n: JB566885
  • MILLER DIMENSION 302 digital MIG welder with MILLER S-22A wire feeder, cables & gun, s/n: KJ237684

FINISHING EQUIPMENT

  • NORDSON VANTAGE 6000 electrostatic powder coating system with 7'x9'x8' enclosure
  • BINKS 27'x14'x9' fully enclosed paint booth with roll up doors, ICE MAXITROL regulator system, power, lights
  • 40'X24'X18' paint booth with power, lights, filtration
  • TIMESAVERS single head deburring machine, s/n: n/a
  • (3) GENERAL MODEL 100 combination sanders with 16" disc & 6" belt, s/n: AB-089, n/a, G284
  • KING CANADA KC-706L combination sander with 9" disc & 6" belt, s/n: n/a
  • BOEING/LSFA portable sander with dust collector, s/n: CHAK28
  • BEVEL-MILL VA400 bench-type bevel mill, s/n: 4062

MATERIAL HANDLING

  • HYSTER S100XL 10,000 lb. capacity LPG forklift with 184.5” max. lift height, 3-stage mast, side shift, solid tires, s/n: D004D03309U
  • TOYOTA 8FGU25 3,600 lb. capacity LPG forklift with 218” max. lift height, 3-stage mast, side shift, multi-surface tires, 2,322 hours (recorded on meter at time of listing), s/n: 60474
  • O'BRIEN 2 ton double girder top-running overhead bridge crane with STREET 2 ton capacity electric hoist, s/n: n/a
  • PRO-ACTION 1 ton single girder underslung bridge crane with BUDGIT 1-ton electric hoist, s/n: n/a

INSPECTION EQUIPMENT

  • MITUTOYO BRIGHT APEX A1230 bridge-type CMM with 55"x156" granite table, measuring range: X - 47.24; Y - 118.10”; Z – 39.36”, RENISHAW PH10M touch probe, joystick controller, s/n: n/a
  • VIRTEK LASER QC rapid laser inspection system with 48”x48” scan area, 300 lb. max. workpiece weight, VIRTEK LPS-1E laser projector, s/n: n/a
  • ASCOTT (2007) S1000 salt spray test chamber with digital control, 1000L capacity tank, s/n: 809
  • NEWAGE INDENTRON NI-400C digital bench-type hardness tester, s/n: 002380

FACTORY SUPPORT EQUIPMENT

  • AIRFLOW SYSTEMS (2001) ALH1-STD 24"x32" portable down draft table, s/n: 1001828
  • (2) TASKI SWINGO 1250B 24V electric walk-behind floor scrubbers with charger
  • SEMCO MODEL 388 Semkit package mixer, s/n: 1189

COMPLETE ANODIZE LINE

  • TEMPRITE CIIM300 indirect natural gas-fired duct furnace with 3,750,000 BTUH max. input, 90 deg. F max. temperature rise, 875 fan RPM, s/n: NH4-11669-OT
  • MFG. UNKNOWN in-line air blower with associated ducting
  • TEMPRITE CMA122-155-NPI direct natural gas-fired make up air heater with 1,750,000 BTU/HR max. input, 15,500 CFM, 10 HP, 730 fan RPM, s/n: TA4-11667-OT
  • Chemical & wash tanks with associated piping, pumps, gauges & valves

ALSO:

  • DEWALT DW871 14" abrasive cut off saw, BALDOR 6" double end pedestal grinder, FLEXARM tapping arm with pneumatic tapping tool, hand tools, power tools, air tools, inspection equipment, perishable tooling, multi-drawer tool cabinets, shop supplies, pallet jacks, shop carts, rolling wire shelves, work benches, self-dumping hoppers and MUCH MORE!

LIVE WEBCAST ONLY

Arnprior Brochure

Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 19% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN CAD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com