Surplus to the Needs of a

Major Hot Water Heater Manufacturer

Large Tank Fabricating Facility

 

Date

Wednesday, August 1, 2018

Start Time

9:30 AM PDT

Inspection

Tuesday, July 31 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction.

Removal

BY APPOINTMENT ONLY. Please email pickup@corpassets.com to arrange a date and time.

Industry

Fabricating
 


 

FEATURING: OMAX (NEW PUMPS & REBUILD IN 2014) 55100, CNC water jet cutting table; Complete powder coat paint line with GEMA (2012) OPTIFLEX powder coating system, GEMA (2006) VOLSTATIC booth, GEMA dust collector, overhead monorail system etc.; PROCECO TYPHOON HD72-96-G-2000-2RD, 2 stage wash system w/ 2000 LB turntable capacity, 360,000 BTU/HR etc.; LARGE high temp car bottom furnace w/ Inconel burners, dual side load shuttle tables, etc. (NUMEROUS UPGRADES AS RECENT AS 2017); WYSONG (1996) 140 ton x 144” CNC hydraulic press brake w/ AUTOBEND 7 control; WYSONG 10’ x ¼” hydraulic shear; WYSONG 12GA x 4’ mechanical shear; Adjustable off-set line w/ traveling car, 5/16” ¼” and 3/16” capacity, (2) drive units; WEBB vertically & horizontally adjustable rotary welding positioner w/ support rollers; ROUNDO 8’ x ½” – 5/8”, 3-roll hydraulic drop end plate rolls; POPE MACHINE CO 5’ x ¼” mechanical plate rolls; LARGE adjustable seam welder w/ approx. 20’ travel and turning rolls; JETLINE approx. 8’ seam welder w/ Lincoln power supply; PANDJIRIS 6’ approx. seam welder; HPM 500 ton hydraulic 4-post press; QMR 96” dual swing table shot blast system; LARGE car bottom shot blast booth w/ reclamation unit; PANGBORN shot blast booth; LINDE 12’ x 40’ plasma cutting table w/ BURNY 10LCD PLUS control, HYPERTHERM HySPEED HT2000 power supply etc.; 5’ x 20’ Plasma cutting table w/ BURNY 10LCD PLUS control; IRCO welding positioner & tank turning rolls; WEBB tilting welding positioner/roller; SMT PULLMAX plate beveller; PLC controlled (2003) frit sprayer; USI 110T, OBI gap frame stamping press; NIAGARA 100T, OBI gap frame stamping press; DONALDSON TORIT cartridge type dust collector; FORD F-350XL SUPER DUTY, pick-up truck; CATERPILLAR 100, 10,000 LB outdoor LPG forklift w/ sideshift; HYSTER 100, 10,000 LB indoor LPG forklift; HYSTER 8400 LB, indoor LPG forklift; HYSTER 4850 LB, outdoor LPG forklift w/ sideshift; HYSTER 50, 4800 LB outdoor LPG forklift w/ sideshift; YALE 4250 LB, outdoor LPG forklift w/ sideshift; HYSTER electric walkie; TENNANT floor sweeper; MILLER DYNASTY 350, digital TIG welder; (25+) Assorted welders w/ wire feeders & plasma cutters; (10) NEDERMAN & LINCOLN snorkel fume extraction arms; CMCI vacuum plate lifter; (2) ANVER vacuum sheet lifters; (2) QUINCY air compressors; PNEUMATECH air dryer; PEMSERTER SERIES 4, hardware insertion machine; JAM BPN505L, 5 ton high speed press w/ 275 SPM; STARTRITE vertical band saw; EMPIRE shot blast cabinet; MOREHOUSE COWLES high speed mixer; (10+) LISTA cabinets w/ spare parts & consumable supplies; PRODUCTION wood working & electrical components manufacturing departments; (6) Single girder overhead bridge cranes up to 5 ton capacity; LARGE ASSORTMENT OF raw material, press brake dies, spot welders, welding equipment & accessories, acorn tables, hydraulic scissor lift tables, jib cranes, hydrostatic test bench w/ steel storage tanks, open side paint booths, adjustable racking w/ wire shelves, free standing crane systems, general machining equipment, factory support equipment & MUCH MORE!

POWDER COATING LINE

  • PROCECO TYPHOON H72-96-G2000-2RD wash booth with 73" turn table 2000 LBS capacity, 53 high pressure washing nozzles, 360,000 btu/hr heating capacity, 748 US gal. 1st stage tank capacity, 390 US gal. 2nd stage tank capacity, 440v/48amp/3ph, 30 hp motor S/N: 92-235
  • GEMA VOLSTATIC powder coat booth 72" x 96"x 144" with 8 ITW GEMA OPTISTAR powder coating sprayers, ITW GEMA OPTIFLEX A2 control cabinet with 8 ITW GEMA OPTISTAR digital controls, OPTIFLEX 2 CG09 handheld sprayer, FSC fire detection/process FS system 10 control system chamber, GEMA VOLSTATIC RGCS 12-6000 filter cabinet. S/N: IG074417
  • GLOBAL FINISHING SOLUTION 168" x 104" x 120" spray booth with (2010) ITW GEMA OPTIFLEX 1-B OPTISTAR industrial powder system S/N: 1700.1884
  • DRY-QUIK 7232-1183 infra-red oven temperature control timer at 350 degrees Fahrenheit, 576 ceramic DRY-QUIK heads, 96' x 72" x 336" open top oven tunnel  S/N: 804-4-750
  • Approximately 132' hanging monorail conveyor

FABRICATING

  • WYSONG MTH140-144, 12' press brake with 140 ton capacity, HURCO AUTOBEND 7 CNC control, hydraulic clamping, 126" between housing, 8" stroke, 9" adjustment, 17" max die space, STi minisafe-B long range MS4400B-2 series light curtains S/N: MT5-116
  • WYSONG H-2510 10' hydraulic shear with DC-100 CNC control, 1/4" gauge capacity, S/N: H21-200
  • WYSONG 1232 52" mechanical shear S/N: P13-1346
  • WEBB AP-84 hydraulic head press with capacity 84" x 18' cap. S/N: N/A
  • WEBB M-5/M-4 offsetter with 1/2" capacity, 24' between centers S/N: 7418
  • SMT-PULLMAX edge beveler with 5/8” capacity, S/N: N/A
  • PEMSERTER Series 4 pneumatic insertion punch with 17" throat, 10" stroke S/N: S4J-4136 
  • J.A.M. BPN5051 notcher 5 ton capacity, 38mm stroke, 275 SPM, 187mm shut height, 40mm ram adjustment, 39.69 x 60mm ram hole, 360 x 305mm bolster plate 230volt/7.4amp/1hp.  S/N: 3Z407
  • DANLY air press with 5 ton capacity at 89 psig, 5" stroke, 11" slide, 19"x19" die space S/N: 975-9081
  • ROPER WHITNEY 34 lever press with 8 ton capacity single hole punch S/N: 737677
  • ROUNDO PS310 plate roll with 96"x1/2"x5/8" capacity, S/N: OY1769
  • POPE plate bending rolls with 5/16" capacity S/N: 1551048
  • STARTRIGHT 18-V-10 vertical band saw with ideal blade welder S/N: 45282
  • DELTA 18" radial arm saw, s/n NA
  • BRIDGEPORT vertical milling machine S/N: 89572
  • DAYTON 20 ton capacity h-frame shop press S/N: N/A

STAMPING PRESS

  • HPM straight side press with 500 ton capacity, 48"x 60" bed, S/N: N/A
  • NIAGARA E-110 OBI press with 110 ton capacity, 50"x30" bolster, 34"x24" ram, 24" shut height, 5" adjustment, 60 SPM S/N: 50246
  • UN INDUSTRIES 110 OBI press with 110 ton capacity, WPC WINTRIS clutch/brake control, 30"x39" bed, 21"x28" ram, 10" stroke, 19.5" shut height, 5" adjustment, 40 SPM, S/N: 54-3060

CUTTING TABLES

  • LINDE CM350 cutting machine with HYPERTHERM HY-SPEED HT2000 plasma power source, BURNY 10 LCD plus CNC touch screen 3 axis control, 42'x13' cutting table, travels Z-12", X-155", Y-504", HYPERTHERM chiller, unit S/N: 2000-006745
  • LINCOLN ELECTRIC plasma table with HYPERTHERM POWERMAX 1650 plasma power source, BURNY 10 LCD plus CNC touch screen 3 axis control, 26'x6' cutting table, travels Z-12", X-63", Y-300", S/N: 1650-002902
  • OMAX (NEW PUMPS & REBUILT IN 2014) 55100 jet machining center water jet table with 60"x126" cutting table, travels Z-8", X-100", Y-55". OMAX solids removal system, variable speed control, terrain follower, laminar filtration unit, running time 1110 HRS recorded, S/N: B511685
  • HYPERTHERM POWERMAX 1650 G3 SERIES portable plasma cutter with 60"x60" tracing cutting fixture table S/N: 1650-016800

WHEELABRATORS

  • PANGBORN walk-in blast booth 94"x98" opening, 148"x182"x104" inside dimensions, (3) 9’ in-floor media auger re-claimer system, 144 bag dust collector, BULLARD clean air filtration system S/N 23NH7-6211
  • WHEELABRATOR blast booth with (2) 96" tables, 144"x192"x228" opening, 96 bag baghouse dust collector/media re-claimer system, 480VOLT/3PH/ (2) 30HP motors S/N: B910113/A134071
  • PANGBORN shot blast booth 76"x38"x36" opening with dust collector/media re-claimer system S/N: EPS-593
  • EMPIRE PF3648 sand blast cabinet with empire DCM-200A pro-finish dust collector and re-claimer unit S/N: M-98558

COMPRESSORS

  • QUINCY NORTHWEST QNW 501-C 100HP rotary screw compressor, S/N: 960497C
  • QUINCY NORTHWEST QNW 501-D 100HP rotary screw compressor, S/N: 960498C
  • PNEUMATECH AD-500 non-cycling refrigerated air dryer with 500 CFM capacity, 150 psig max air pressure, 440-480volt/3ph/60Hz, S/N: 9607-T124078-ST
  • HANKISON HPR500 air dryer 500SCFM capacity, 100 PSI max air pressure, 460volt/3ph/60Hz S/N: N/A
  • Air receiver tank 750 gal.

WELDERS

  • MFG UNKNOWN seam welding positioner with LINCOLN IDEALARC DC-1000 MIG/arc welder, LINCOLN electric NA-5 wire feed, welds up to approx 25' seam S/N: N/A
  • JETLINE seam welding positioner with LINCOLN IDEALARC DC-1000 MIG/arc welder, LINCOLN NA-5 wire feed, welds up to 108" seam with 66"x24" electric lift cart S/N: AC693128
  • PANDJIRIS 72E6-48 SEAM WELDING POSITIONER with 84"X43" capacity (no welding power source) S/N: 400-1644
  • LINCOLN IDEALARC R3S-600 MIG welder with cypress circle welding machine and jib arm S/N: AC439281
  • LINCOLN ELECTRIC DC-600 MIG welder with squirt mobile power pack, LINCOLN electric LN-9 wire feed S/N: C1020700536
  • LINCOLN IDEALARC DC-400 MIG/arc welder with LINCOLN electric LN-7 wire feed S/N: AC729469
  • (6) LINCOLN ELECTRIC DC-400 MIG welders with LINCOLN electric double header dh-10 wire feed S/N: U1940224663, U1940408561, U1961204111, U1971007999, U1970209086, U1960313477
  • (3) LINCOLN ELECTRIC INVERTEC V350-PRO digital MIG welders with LINCOLN electric double header DH-10 wire feed S/N: U1040319708, U1040413168, U1020628291
  • MILLER DELTA-FAB CV-DC MIG welder with MILLER 70 series wire feed and welding boom         S/N: LE492896
  • MILLER XMT 456 CC/CV DC inverter arc welder with MILLER double head MIG wire feeder and welding boom S/N: MB020460A
  • MILLER DELTA-FAB CV-DC MIG welder with MILLER 24A wire feed S/N: LE492882
  • MILLER SYNCROWAVE 250 DX digital TIG welder S/N: LG450033L
  • MILLER DELTAWELD 652 CV-DC digital welding power source S/N: LA285373
  • THERMAL ARC 350 POWER MASTER MIG welder with VA4000 professional ultrafeed wire feed S/N: M07031501041
  • THERMAL ARC 350 POWER MASTER MIG welder with VA2000 professional ultrafeed wire feed S/N: M06071901026
  • (2) THERMAL ARC 350 POWER MASTER MIG welder with A2000 professional ultrafeed wire feed S/N: M06071901022, M06062701050
  • TRW NELSON NCD60 stud welder S/N: N/A
  • STRYCO F3060A spot welder with 300 weld schedules 108 single phase microprocessor control, 34" throat, 8" stroke, 440volt/136amps/60 cycle/60kva S/N: 43-4350-1520-70-02573
  • ARONSON 72"X42" welding positioner S/N: N/A
  • PANJIRIS 15-4 FB welding positioner S/N: 12345X01-6
  • ALL FAB CORP PS-3F-2.5 welding positioner with 500lbs capacity, S/N: 0625852
  • DONALDSON TORIT DF02-2 portable fume extractor S/N: 12152421-L1-1

PAINT BOOTHS

  • 86"x115"x120" spray booth with exhaust fan and programmable frit sprayer S/N: N/A
  • 192"x108"x96" spray booth with exhaust fan and MOREHOUSE COWLES v24-20 pneumatic 55 gal. paint mixer S/N: LA-606 (paint mixer may be sold separately)
  • 240"x114"x72" spray booth with exhaust fan

FURNACE

  • BROWN ENGINEERING SYS4340 furnace (NUMEROUS RECENT UPGRADES) with 46 gas INCONEL burners, high/low gas limit switch, high temp safety switch, hydraulic doors, hydraulic table, max temp 1700 degree Fahrenheit, 286"x143" O.D., 246"x106" I.D. S/N: 22007

MATERIAL HANDLING

  • (3) F.T. CROWE AND COMPANY 5 ton capacity top running single girder overhead bridge crane with SHAW box 5 ton capacity under slung pendent control hoist approx 54' span, approx 190" under hook S/N: N/A
  • F.T. CROWE AND COMPANY 3 ton capacity top running single girder overhead bridge crane with SHAW box 3 ton capacity under slung pendent control hoist approx 54' span, approx 190" under hook S/N: N/A
  • (2) F.T. CROWE AND COMPANY 2 ton capacity top running single girder overhead bridge crane with SHAW box 2 ton capacity under slung pendent control hoist approx 54' span, approx 190" under hook S/N: N/A
  • (3) 170' approx runway I-beam and buss bar
  • 3 ton capacity free standing 245"x 131" single girder crane system with HARRINGTON 3 ton capacity hoist pendent control, approx 33' monorail, 138" under hook S/N: N/A 
  • 1 ton free standing 444"x217" single girder with (2) 1 ton capacity COFFING electric hoist pendent control, 134" under hook S/N: N/A
  • (2) ABELL-HOWE 1/2 ton capacity free standing jib arm with 1/2 ton capacity COFFING electric hoist
  • 1/2 ton capacity wall mount jib arm with 1/2 ton capacity pneumatic GARDNER DENVER hoist
  • 1/2 ton capacity wall mount jib arm with 1/2 ton capacity COFFING hoist
  • 1/2 ton capacity wall mount jib arm with 1/4 ton capacity JET hoist
  • 1/2 ton capacity wall mount jib arm with 1/4 ton capacity pneumatic hoist
  • 1/4 ton capacity wall mount jib arm with 1/4 ton capacity COFFING hoist
  • 1/4 ton capacity wall mount jib arm with 1/4 ton capacity JET pneumatic hoist
  • MFG UNKNOWN portable "A" frame gantry with 300 LBS capacity CM SHOPSTAR electric hoist
  • CMCI D.94686.1 vacuum sheet lifter with 4650 LBS capacity S/N: C.94686
  • ANVER M1009M-L vacuum sheet lifter with 1000 LBS capacity S/N: S0170011384
  • ANVER vacuum sheet lifter with 750 LBS capacity S/N: N/A
  • ANVER VPFL4-20-AIR-T-L vacuum sheet lifter with 500 LBS capacity S/N: S0140006478
  • ANVER BAi-FVW/PA95-3-TH vacuum sheet lifter with 250 LBS capacity S/N: 107399-1

ROLLING STOCK

  • CATERPILLAR GP45 LPG forklift with 10,000 LBS capacity, 238" max vertical reach, 3 stage mass, side shift, solid tire, S/N: AT33-00379
  • HYSTER S100XL LPG forklift with 10,000 LBS capacity, 111" max vertical reach, 2 stage mass, side shift, solid tire, S/N: D004V03732L
  • HYSTER S80XL LPG forklift with 8450 LBS capacity, 121" max vertical reach, 2 stage mass, side shift, solid tire, S/N: D004V02695K
  • HYSTER H50XM LPG forklift with 4850 LBS capacity, 189" max vertical reach, 3 stage mass, side shift, solid tire, S/N: D177B37977U
  • HYSTER H50XM LPG forklift with 4800 LBS capacity, 189" max vertical reach, 3 stage mass, side shift, solid tire, S/N: D177B24167S
  • YALE GLP050VXNGSE084 LPG forklift with 4450 LBS capacity, 189" max vertical reach, 3 stage mass, side shift, solid tire, S/N: B875V05623J
  • TENNANT 355 ride floor sweeper S/N: 355-1151
  • FORD (2007) F350XL SUPER DUTY 5.4L gas pickup truck with 57017 miles VIN# 1FTSF30578EA94185

ALSO:

Rolling shop ladders, hand tools, pneumatic tooling, pallet racking, shop tables, shop carts, hydraulic pallet jack carts, shop fans, office furniture and office equipment and much more!

ONSITE & ONLINE


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 16% for all onsite bidders and 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com