SLITTING LINES STAMCO (1990), 72" x .135" x 65,000# slitting line with 6" - 72"coil width, 8" dia. arbour, 65,000 lbs. max. coil weight, (2) injector heads, 500/1000 FPM line speeds, designed to run as “tight line” or with pit, consists of: coil car, entry 4 arm turnstile, peeler table, hold down, uncoiler w/ 24” ID & outboard support, entry crop shear, radiation thickness gauge, backed up 8 over 9 leveler, scrap baller, (2) slitting heads, tension stand, dual arm turret style recoiler w/ 20” or 24” ID, exit coil car, 4 arm exit turnstile, upender, automatic banding head, stacker, lazysusan type coil shuttle, 125 HP slitting head drive, 150 HP uncoiler drive, 250 HP recoiler drive STRAIGHT SIDE 4 POINTS ECCENTRIC PRESSES (2) VERSON (1989), S4-1600-132-72 SS, 4 point press with 1600 ton cap., 132” X 72” bed, 26” stroke, 48” SH, 15-24 SPM, 51” windows, bolster, blank feeder, S/N: n/a, CLEARING (1967), S4-1500-168-96 SS, 4 point press with 1500 ton cap., 168” X 96” bed, 16” stroke, 30” SH, 16SPM, windows, 10.5” bolster, S/N: 10-4054 VERSON (1995), LE4-1000-180-96 SS, link drive 4 point press with 1000 ton cap., 180” X 96” bed, 12.31” stroke, 44” SH, 8-60 SPM , S/N: n/a CLEARING S4-1000-108-72 SSDC press with 1000 ton cap., 108” X 72” bed, 20” stroke, 64” SH, 20 SPM, 53” windows , S/N: n/a (3) BLISS (1966), SE4-800-132-84 SS, 4 point press with 800 ton cap., 132” X 84” bed, 18” stroke, 20 SPM, 44” windows, S/N: n/a DANLY SS4-400-124-84 SS, 4 point press with 400 ton cap., 124” X 84” bed, 16” stroke, 44” SH, 9-40 SPM, 72” windows, S/N: n/a STRAIGHT SIDE DOUBLE CRANK PRESSES CLEARING S2-1000-120-60 SSDC press with 1000 ton cap., 120” X 60” bed, 20” stroke, 41” SH, 12 SPM , S/N: n/a (3) CLEARING S2-500-108-60 SSDC press with 500 ton cap., 108” X 60” bed, 18” stroke, 39” SH, S/N: 10-4021, 10-4050, n/a VERSON (1987), S2-800-120-60 SSDC press with 800 ton cap., 120” X 60” bed, 14” stroke, 32” SH, 14-24 SPM, 40 “ windows, 40” X 30,000 lbs. coil feed line, S/N: N/A DANLY S2-600-108-48 SSDC press with 600 ton cap., 108” X 48” bed, 12” stroke, 42” SH, 20-60 SPM, 39“ windows , S/N: n/a DANLY (1976), S2-600-96-60 SSDC press with 600 ton cap., 96” X 60” bed, 36” SH, 20-60 SPM, 36” X 20000 lbs. coil feed line, S/N: n/a (3) CLEARING S2-300-96-60 SSDC press with 300 ton cap., 96” X 60” bed, 18” stroke, 36” SH, 16 SPM, S/N: 102, 102054, 2005 MINSTER (1993), E2-200-84-42 SSDC press with 200 ton cap., 84” X 42” bed, 10” stroke, 22” SH, 0-90 SPM, 20“ windows , S/N: LE2-200-28106 PRESSES DOUBLE ACTION DANLY (1963), D2-600-400-108-72 SSDC press with 600/400 ton cap., 108” X 48” bed, 24” /30” stroke, 65”/70” SH, 16 SPM, S/N: n/a PRESSES OBI/GAP DANLY GI-250 permanently inclined gap frame press with 250 ton cap., 62” X 36” bed, 12” stroke, 30” SH, 30 SPM, cushion, S/N: 545054 CLEARING SGI-150 back geared OBI press with 150 ton cap., 50” X 30” bed, 10” stroke, 22.5” SH, 35 SPM, S/N: 545054 PRESS ROOM EQUIPMENT AUTOMATIC FEED CO. (1995), 76” X .187” 19 roll backed up leveller with entry & exit rolls, threading table, DC feed with measuring roll, S/N: n/a STRILICH (1997), 50,000 lbs. X 72” X .250” press feed line with 17 roll backed up leveller, S/N: n/a MINSTER MS30-50-7 strip straightener with 50” max. strip width, .100” max. strip thickness, (7) 3” dia. rolls, S/N: n/a